News Feed
Michiel de Boerwants this item
R-11 USAF/NATO Fuel Truck With Missile Loading Cart
Kinetic 1:48
K48116 2024 New box Multi-topic (1!!)10 July, 09:21
Erwin Leetinkadded a new photoalbum.
5 9 July, 17:12
Erwin LeetinkThanks Gorby!
I found out that I managed to get the tracks on reversed. So I switched them around and, while at it, shortened them by one link.
10 July, 09:17
J35Jadded a new photoalbum.
63 7 December 2023, 18:57
RandoHad no idea that they made a carrier borne Mosquito til I saw this project, lots of interesting and unique features to include here
19 December 2023, 23:44
J35J@Rando - Thanks for your intrest, indeed it is a quite unique bird.
Derived from the Mosquito the Sea Mosquito was intended to be used aboard the Fleet Air Arm's aircraft carriers. During its time in service it would only be used by land based squadrons. Two variants of the de Havilland Sea Mosquito were built and only 67 was produced.
21 December 2023, 16:23
Andy Ballwell, this version I haven't heard of, so I'll crane my neck over yours...
10 January, 19:40
Łukasz GlińskiSeems quite a logical idea - staying afloat in case of ditching into the sea 😄
10 January, 19:46
Bernd GrünVery nice project. It turns out very well. 👍 Didn't know anything about Sea Mosquitos.
15 March, 14:22
J35JThanks mates for your intrest and kind comments. The project is slowly moving forward. Waiting for some photo etch parts.
15 March, 19:45
J35JThanks David & Rando for you comments. Much appreciated👍🏻
Paint job and a light weathering in progress. Need to crack on with the decals in next phase before getting the folded wings in place.
21 June, 09:18
Robert PodkońskiSomehow I missed this project before... And I have never heard about Sea Mossie up to now... Great job so far - keep it up!
28 June, 18:59
J35JThanks BC NRA for your kind comments. Yes, the Sea Mosquito was a rare bird. Always fun to research & build the more odd versions.
1 July, 20:29
J35JThanks Thomas for your kind comments.
Just realized going for the final photos that I missed the wind shield wiper for the front screen. Details, details…🙈😅
7 July, 20:12
Łukasz GlińskiVery cool. Wish I could get that conversion set. The nose pimple is just a cherry on the cake 😄
8 July, 09:42
J35JThanks Villiers de Vos & Lukasz Gliński for your intrest and kind comments!👍🏻
@ Lukasz Gliński - you can find a conversion kit here:
blackbirdmodels.co.u..ersion-72-2642-p.asp
8 July, 15:41
Frank Eberwein@Odin ThorGuten Morgen... ok hätte es genauer sagen sollen, Ich würde deinen gerne Kaufen insofern er noch Orginal und Unverbaut sprich alles vorhanden ist.
Grüße Frank
7 July, 06:00
Odin ThorGuten Tag, er ist neuwertig. Er ist so wie ich ihn im Laden neu erworben habe, kleine Lagerspuren, er ist vollständig.
Versand würde noch dazu kommen.
Die Kosten für Versand wären dann 25 CHF. Gesamtbetrag wären dann 75 CHF.
Der Versand würde versichert sein bis 50 CHF und mit Sendungsverfolgung.
Grüße Thor
7 July, 07:44
Frank Eberwein50 Franjen fürs Modell passt für mich aber 25 Franken Versand finde ich schon recht happig....wenn ich Dir was mit DHL schicke kostet mich das inkl Versicherung 15€....
8 July, 06:22
Odin ThorGuten Tag, ja dafür kann ich nichts, das sind eben die Preise der Post in der Schweiz
Du kannst ja auf der Webseite der Schweizer Post selber nachprüfen, was es kostet, ich mache nicht die Preise. Sorry Mit DHL Schweiz würde es sogar mehr kosten.
nein, ich habe kein Paypal. Da es mit dem Schweizer Post Konto nicht möglich ist, es zu verbinden.
8 July, 07:55
Odin ThorIch werde das Paket vorbereiten,
Bernhard Rigert
Adresse: Turbenweg 11 0373 Gümligen
IBAN CH83 0483 5110 4554 1000 0
BIC / SWIFT
CRESCHZZ80A
Verwendungszweck: Scalemates
Und bitte deine email adresse: Danke
Grüße Bernhard
10 July, 07:04
Frank EberweinPäckchen geht dann bitte an
Frank Eberwein
Seestraße 20
71144 Steinenbronn
Mail: maylauer@hotmail.com
ich überweise Dir die nächsten Minuten via Sofortüberweisung 80€ das sollte dann beim aktualem Kurs passen?!
10 July, 09:15
Joewants this item
M1A1 ABRAMS TANK Ukraine Update Version with Workable Tracks
Rye Field Model (RFM) 1:35
RM-5120 (RM5120) 2024* New parts 10 July, 09:11
Kevin Sadded a new photoalbum.
8 9 July, 22:10
Thomas KolbThat's a lovely finish! I really like that you weathered the decals too, especially the large "284".
10 July, 08:47
Moreno BaruffiniI agree with the above, a super clean assembly and a very precise livery!
10 July, 09:09
Thomas Strübingcompleted this item
Pоst-apocalyptic series. The Last Bridge. Kit No. 1.
Sabrina
Master Box (MB) 1:2410 July, 09:05
Thomas Strübingcompleted this item
"Special Cargo"
Handle with care Sandy and George "Skip" (Truckers series Kit No. 9) Master Box (MB) 1:2410 July, 09:04
Jakko added a new photoalbum.
21 images
Sherman BARV
1:35
Details from the conversion set added to the front, and rings (sawed from 7.1 mm plastic tube) into the hull ventilators...
Project: Sherman BARV, D-Day
14 2 July, 20:50
gorbyI think you win this weeks prize for most heavy duty modelling tool. 😄
Looks a very interesting conversion.
5 July, 06:33
Jakko > I think you win this weeks prize for most heavy duty modelling tool. 😄
Probably, yeah 🙂 It's a metalworking lathe, so a bit overkill for just turning down the seam on those wheels, but I didn't feel like aching fingers from scraping them down with a knife — I get those even when I hold them in a modelling vice, never mind just between my fingers.
> that kind of set up can tool a real bogie!!
Having seen a disassembled Sherman bogie up close, I must say I think this one is a size too small for that 😉
5 July, 08:53
Jakko @Mr D: that's not the welds yet, it's just the filler needed to plug the gaps 🙁 I'm still debating how to add all the weld seams.
@Ben M: An M2 screw, about 2 cm long, through the hole in the wheel, with a nut to tighten it. It needs to be fairly tight else chances are the wheel will stop as soon as the chisel hits it. On Asuka two-piece wheels, you need to do this before assembling the parts, because the hole on the piece to be glued in is smaller than on the part that has the tyre moulded on it.
9 July, 08:59
Ben MThank you, I can envision the setup. I have a small lathe and arthritis in my hands, this technique could help me a lot. Thanks!
9 July, 11:58
Mr DRegarding weld's l have seen super glue used through a fine tip, you need steady hand n move in pattern to create weld.
Sorry l was looking at the resin 🤔🤣.
Good stuff be keeping eye
On progress 👍👍
9 July, 13:30
Jakko @Ben M: What also works is a modeller's vice. Clamp the wheel in that, scrape down the seam with a straight knife over a third or so of the wheel, then unclamp and turn it, and repeat. If I scrape more than about two or three wheels by hand, my fingers ache enough that I have to stop, so the vice helps a lot. But you also get a lot of plastic scrapings all over your modelling area, so this time, I figured I'd put those in someone else's hobby room instead for a change 😉
@Mr D: Hahaha! The ones on the resin were put there by Resicast 🙂 But I'll now have to make ones that look similar, or at least not out of place next to them. I'm thinking a thin string of two-part epoxy, textured with a sharp tool.
9 July, 17:09
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=en
35
35
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo