News Feed
Allan T
added a new photoalbum.
added a new photoalbum.
13 6 April, 09:07
Doubtingmango
Beautiful work! Particularly like all the work on the turret interior. Any thoughts on the kit?
Beautiful work! Particularly like all the work on the turret interior. Any thoughts on the kit?
27 July, 12:23
John Mulhall
marked this item as tradeable/sellable
marked this item as tradeable/sellable
Hurricane Canopy & Wheel Hub Masks
Cutting Edge Modelworks 1:48
CEBM48101 27 July, 12:22
Goldman
owns this item
owns this item
The Complete Guide to Truck Modelling Volume 2
The Complete Guide to Truck Modelling No. 2
Jan Rosecky
2020 27 July, 12:22
John Mulhall
marked this item as tradeable/sellable
marked this item as tradeable/sellable
Hawker Hurricane Mk.I - Whitemetal Landing Gear (for Airfix 2014 mold)
Scale Aircraft Conversions 1:48
48287 2015 New tool 27 July, 12:21
C L
added a new photoalbum.
added a new photoalbum.
1 images
Japanese Navy Destroyer IJN YukikazeNew: 27 July, 04:11 1:350
Project: Japanese Navy Destroyer IJN Yukikaze
7 16 June, 15:22
Erik Torp
added a new photoalbum.
added a new photoalbum.
21 images
Long Range Desert GroupNew: 27 July, 12:03 1:35
The jeep is finished.
Project: LRDG Chevrolet truck and Willys
16 28 June, 23:44
Ben M
added a new photoalbum.
added a new photoalbum.
9 29 May, 22:29
Ludvík Kružík
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.
The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.
The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.
27 July, 09:16
Ben M
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.
I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.
I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.
27 July, 12:12
Si Cole
added a new photoalbum.
added a new photoalbum.
19 images
Yamaha YZR500 Grand Prix RacerNew: 27 July, 12:09 1:12
Project: Yamaha YZR500 Grand Prix Racer
9 11 May, 20:26
Andrzej Rygiel
owns this item
owns this item
Su-25 Frogfoot remove before flight covers
Quickboost 1:48
QB 49099 27 July, 12:08
bughunter
added a new photoalbum.
added a new photoalbum.
26 images
Work in Progress: an early PfalzNew: 26 July, 15:50 1:48
This picture shows also, that the different primer worked as hoped. The wings look darker than the fuselage.
Project: Pfalz D.III - 4056/17
36 24 July, 18:53
bughunter
After a health problem, I stopped modelling for a short time. I didn't want to continue the projects I had started because I wasn't in the mood for scratch modelling. I wanted to make a quick project - almost oob. Of course with a wooden propeller, because building one is just fun.
Working on two Pfalz D.IIIa (one as a triplane conversion) a long time ago was great fun and there was still a special kit waiting in my stash: a Limited Edition Dual Combo Pfalz D.III. No, I haven't forgotten the "a", this really is the forerunner of the D.IIIa. Eduard has re-released the D.IIIa kit often, but this Edition is from 2005 and was never released again. I hear some voices: Limited Editions are for collecting, not building. Never mind, I'm building the kit now!
I'm building the machine from the cover picture - and because there's a heart on it, I'm dedicating the build to my wife, who always supports me!
After a health problem, I stopped modelling for a short time. I didn't want to continue the projects I had started because I wasn't in the mood for scratch modelling. I wanted to make a quick project - almost oob. Of course with a wooden propeller, because building one is just fun.
Working on two Pfalz D.IIIa (one as a triplane conversion) a long time ago was great fun and there was still a special kit waiting in my stash: a Limited Edition Dual Combo Pfalz D.III. No, I haven't forgotten the "a", this really is the forerunner of the D.IIIa. Eduard has re-released the D.IIIa kit often, but this Edition is from 2005 and was never released again. I hear some voices: Limited Editions are for collecting, not building. Never mind, I'm building the kit now!
I'm building the machine from the cover picture - and because there's a heart on it, I'm dedicating the build to my wife, who always supports me!
24 July, 19:34
Kyle DeHart
Excellent to see you Frank!! I can't wait to follow along with this. Which is sure to be another beautiful build. Any edition…Limited, or otherwise sounds like something to build to me!! But maybe I'm doing things wrong. Ha!!
Excellent to see you Frank!! I can't wait to follow along with this. Which is sure to be another beautiful build. Any edition…Limited, or otherwise sounds like something to build to me!! But maybe I'm doing things wrong. Ha!!
25 July, 04:59
Erik
Zum Glück bist Du wieder fit! 👍
Sieht mal wieder klasse aus, die kleinen Steuerseile sind geil. 🙂
Zum Glück bist Du wieder fit! 👍
Sieht mal wieder klasse aus, die kleinen Steuerseile sind geil. 🙂
25 July, 06:19
gorby
Looks like an interesting project Frank. I must admit that I don't know much about WWI aircraft and your builds are often a lesson about the real machines as well as a lesson in modelling.
Looks like an interesting project Frank. I must admit that I don't know much about WWI aircraft and your builds are often a lesson about the real machines as well as a lesson in modelling.
25 July, 06:38
bughunter
Thank you very much mates! Great to know that you are following 👍
Yeah Kyle, all kits can be build. But some collects rare kits as investment and hope to sell it later for higher prices. Once started the value goes near zero. But we have fun building them and that is invaluable!
@gorby You will see later that the Pfalz fighters are elegant planes!
Thank you very much mates! Great to know that you are following 👍
Yeah Kyle, all kits can be build. But some collects rare kits as investment and hope to sell it later for higher prices. Once started the value goes near zero. But we have fun building them and that is invaluable!
@gorby You will see later that the Pfalz fighters are elegant planes!
25 July, 10:01
Kyle DeHart
Indeed. I take a great pleasure in opening up and building valuable kits. I would be a really horrible collector. Lol.
Indeed. I take a great pleasure in opening up and building valuable kits. I would be a really horrible collector. Lol.
25 July, 10:51
Martin Oostrom
I have a few rare ones. But I'll gladly build them when the time comes. That's what kits are for!
I have a few rare ones. But I'll gladly build them when the time comes. That's what kits are for!
25 July, 15:30
bughunter
A warm welcome to the show also for the new visitors!
I hope to have it ready for our next club meeting, so it will be a quick build (for my standards).
A warm welcome to the show also for the new visitors!
I hope to have it ready for our next club meeting, so it will be a quick build (for my standards).
25 July, 19:20
Michael Kohl
Good to see you back at the bench. I consider the Pfalz DIII one of the most elegant WWI planes and have two in my stash too. So I won't miss this build.
Keep it coming.
Good to see you back at the bench. I consider the Pfalz DIII one of the most elegant WWI planes and have two in my stash too. So I won't miss this build.
Keep it coming.
25 July, 21:00
Ludvík Kružík
I'm also glad you're back on the bench. I really enjoy watching you build models.
... by the way... I really like to buy Eduard limited edition models. They include lots of extras and often a publication with photos and information about the type whose model is in the box. I still have some of the limited edition models in my closet. Not because I just collect them, but because I haven't managed to build them yet. 🙂
I'm also glad you're back on the bench. I really enjoy watching you build models.
... by the way... I really like to buy Eduard limited edition models. They include lots of extras and often a publication with photos and information about the type whose model is in the box. I still have some of the limited edition models in my closet. Not because I just collect them, but because I haven't managed to build them yet. 🙂
26 July, 08:09
Bruce Huxtable
I'm sorry to hear that you had a health scare, and hope that all is okay again for you. Your projects are always inspiring and a joy to follow. Have fun bringing this special one to life 🙂
I'm sorry to hear that you had a health scare, and hope that all is okay again for you. Your projects are always inspiring and a joy to follow. Have fun bringing this special one to life 🙂
26 July, 08:44
bughunter
Thank you very much mates! Your nice comments are highly appreciated!
I hope to show later new pictures showing the elegant lines even more.
@Ludvik Since this is an older kit in this case not a single word about the type! Only a ink jet printed manual, and one colorful, nicely printed sheet showing the six markings including decal placement. Anyway, the kit parts and PE are nice, a mask is also included.
@Bruce Ageing is not for cowards! But at least the fun is back with this project so I made also good progress.
Thank you very much mates! Your nice comments are highly appreciated!
I hope to show later new pictures showing the elegant lines even more.
@Ludvik Since this is an older kit in this case not a single word about the type! Only a ink jet printed manual, and one colorful, nicely printed sheet showing the six markings including decal placement. Anyway, the kit parts and PE are nice, a mask is also included.
@Bruce Ageing is not for cowards! But at least the fun is back with this project so I made also good progress.
26 July, 12:19
bughunter
Now some colour comes into play! I drew some masks and had them cut by the plotter.
Now some colour comes into play! I drew some masks and had them cut by the plotter.
26 July, 16:00
Christoph Kunz
Happy you're back, but what the heck???
This is a speedbuild, never seen one made by you.
And it's going to be an elegant one 👍
Happy you're back, but what the heck???
This is a speedbuild, never seen one made by you.
And it's going to be an elegant one 👍
26 July, 17:59
bughunter
Yes Christoph, that was exactly the reason why I selected this kit/project from my stash! Due to my two Eduard D.IIIa I was fully aware of the kit and I know what have to be done where. For the paint I used here Alclad and Mr.Paint so I could do all the masking and painting on one afternoon 🙂 MrPaint is the "modelling turbo"!
Even the rigging is not very complicated, no crosses inside the struts, and a single-bay biplane 👍
Yes Christoph, that was exactly the reason why I selected this kit/project from my stash! Due to my two Eduard D.IIIa I was fully aware of the kit and I know what have to be done where. For the paint I used here Alclad and Mr.Paint so I could do all the masking and painting on one afternoon 🙂 MrPaint is the "modelling turbo"!
Even the rigging is not very complicated, no crosses inside the struts, and a single-bay biplane 👍
26 July, 19:49
Ludvík Kružík
The speed with which you have progressed on this model is admirable. The paintwork turned out great and the different shades of silver depending on the material the paint was applied to look very good.
The speed with which you have progressed on this model is admirable. The paintwork turned out great and the different shades of silver depending on the material the paint was applied to look very good.
26 July, 21:54
John
That is a lovely machine with a lovely scheme as well. I really do need to do a few WWI subjects. Camo was in its infancy and making a reputation seemed more important at the time so what better way than to add a garish (some would say "striking") paint job? Though, I do NOT need to add more to the stash, I will be 100+ before I finish what I have. As you note, getting older is not fun, but it's preferable to the alternative! Good to see you back. 👍
That is a lovely machine with a lovely scheme as well. I really do need to do a few WWI subjects. Camo was in its infancy and making a reputation seemed more important at the time so what better way than to add a garish (some would say "striking") paint job? Though, I do NOT need to add more to the stash, I will be 100+ before I finish what I have. As you note, getting older is not fun, but it's preferable to the alternative! Good to see you back. 👍
27 July, 02:01
bughunter
Thanks to all for your wonderful feedback!
@Ludvik That is only one thin common layer of Semi Matt Alu. The underground shines through, like a preshading.
@John There are many very nice schemes available in my Pfalz references, especially in the "Pfalz D.IIIa at war" books (I have another D.IIIa Profipack in my shash). Regarding the second kit of this Dual Combo: The six Eduard markings are nice, but I will try to replicate a beautiful blue/red four-view profile painted by Ronny Bar in the Kagero book.
Regarding camo and colorful markings: The German printed fabric known as Lozenge had to task to avoid the detection of the aircraft type from far away (blur contours). The colorful markings were needed during dog fights with many fighters for quick detection of enemy, friends and leaders, as there were no radios yet (ok, some air-to-gound radios with morse code in two seaters; but no communication between fighters).
@J35J Then I hope the further steps will fulfill your expectations!
Thanks to all for your wonderful feedback!
@Ludvik That is only one thin common layer of Semi Matt Alu. The underground shines through, like a preshading.
@John There are many very nice schemes available in my Pfalz references, especially in the "Pfalz D.IIIa at war" books (I have another D.IIIa Profipack in my shash). Regarding the second kit of this Dual Combo: The six Eduard markings are nice, but I will try to replicate a beautiful blue/red four-view profile painted by Ronny Bar in the Kagero book.
Regarding camo and colorful markings: The German printed fabric known as Lozenge had to task to avoid the detection of the aircraft type from far away (blur contours). The colorful markings were needed during dog fights with many fighters for quick detection of enemy, friends and leaders, as there were no radios yet (ok, some air-to-gound radios with morse code in two seaters; but no communication between fighters).
@J35J Then I hope the further steps will fulfill your expectations!
27 July, 11:33
Mr D
Nice ... very nice choice 👍👍👍 been considering one soon... Has it been a good kit ??
Nice ... very nice choice 👍👍👍 been considering one soon... Has it been a good kit ??
27 July, 12:07
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=en
35
35
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo