Newsfeed

Bozo
Hello Tomas,

Create an album. We want more pictures.

Robert Podkoński
Taking a seat, of course!

bughunter
Great start - the subtile structure on the leather is nice 👍

Tom Spiegelberg
Eine gute Bausatzwahl Bernhard! Hier ist viel anpassen und säubern angesagt, aber dann passt das gut zusammen. Problem ist das Dach, da musst Du einerseits an den Rumpfschalen bei den Streben etwas wegnehmen und an der Oberseite. Dann überlistet man diese Hürde. Hab so einige Fotos vom HUK-1 bei Flickr gefunden. Als Fotosuche einfach HUK-1 eingeben.

Bernhard Schrock
Thank you Mattes: A lot of seats are free yet.🙂
Tom : danke für die wertvollen Hinweise. In der Tat habe ich schon geahnt, dass das Dach nur theoretisch passt. Heute Abend willl ich mich an den Zusammenbau wagen.

Augie
Oh am in for this.

gorby
I'll plonk my bum on one of the available seats and strap in for the your next plastic spectacular. 🙂

Bernhard Schrock
🙂. You are welcome: as usual popcorn for all! 🙂
I found the most usable sequence for installation of the fuselage parts:
cockpit to the left half. Right half. Bottom. Upper roof inserted without gluing. Lower roof inserted without gluing. Front bubble glued to the bottom and to the lower roof. Both roofs glued to the fuselage. Air inlet glued in. Ready without mess and disaster. 🙂

Mr D
😀 Nice little project 👍

Spanjaard
not the everyday subject, and built by Berhard? I am in!, pass the popcorn, please 🙂

Alec K
Popcorn is almost gone!?! Looking for an empty seat… ahh, there still room 🙂

bughunter
Any kit, no matter how bitchy, has no chance of fighting back under your hands. And it always looks so easy.

David Taylor
Better have a seat.

Bernhard Schrock
Today I worked on the tail. The detailing and overall fit is excellent. However, I recommend changing the assembly sequence. In my opinion, it will hardly be possible to integrate the parts cleanly if you follow the instruction

gorby
Lovely job!

Lebloge
Thanks a lot Gorby

Lebloge
Thank you for all the likes ☺️

Lebloge
True, bro...it's an old one, but realy fun to do 😄

Neuling
Oldie but goodie .... very well done

Rui S
Really nice paintjob on the tank 👍
I would only sugest (hopping that you don't mind), a bit more paint work on the tracks to be perfect 🤔
I've done this too. Interestingly and coincidentally I also had this "issue" on mine, so I just grabbed a pencil and scratch it on them 😉

Lebloge
No worries Rui, I'm always listening to criticism & tips and tricks. Indeed I was not totally satisfied with the tracks because there is, despite the paint work, a flagrant lack of relief. thank you for the good advice.

Gary Curling
A great day out at the tank museum in Bovington uk,the wife was a bit bored after 4 hours.Hope the photos will help anyone out and not bore you too.

gorby
Thanks for the photos Gary. I haven't had a chance to visit Bovington yet.

Spanjaard
I have Bovington in my bucket list... thanks for sharing, specially the ones of the Panther 🙂

Gary Curling
Thank you Gorby,Spanjaard,i think you need a full day there,so much to see and read.A few of there dioramas displays need updating.

Kirill K.
Interesting photos. Thank you Gary.

Gary Curling
Just a few more photos (part two)Sorry the photos are all over the place 🤨

David Taylor
Pz 2 is one of my favourites.

Doubtingmango
Watching

Neuling
A flawless beauty.

Albert Moore
Thank you, Neuling!

István Szücs
Excellent result!

Albert Moore
Thank you, István!

Dominik Weitzer
great build, well done!

Bob Hall
Nice work, love the blue 👍 !

Albert Moore
Thank you, Dominik and Bob!

Christian W
Great built! I took a really close look on your interior. On my build I want to paint the interior like yours. That looks flawless - the bodywork too 😉.
I have a question to the fitting of the rear hatch. Do you have problems to open it now? I read somewere else, that the part between the removable roof top and rear hatch (sprue G, #149 / "Roof Panel") blocks the opening of the hood. That guy didn't glue #149 onto the body so when he wanted to show the engine, he takes that part off.

Albert Moore
Hello Christian. Thank you for the kind words on my model. Yes, the engine hatch does bind up on that secondary roof panel. Unfortunately, I did not catch it until after gluing that panel in place and the glue had set. I can still open the hatch, but I have to be very careful when doing so as it could chip the paint or clearcoat.

Bruce Huxtable
This is gonna be interesting... 👍🙂

Thomas E.
Thank you for comment and likes. The work is going on ... stay tuned, please.

Thomas E.
I'm dreaming about a Citroën C4 "Pompier" in 1:35. Heller had made this car in 1:24 already. Maybe the new location in Radevormwald will be an inspiration. ... dreamin' ...

gorby
Very nice work.

Thomas E.
Thank you for comment and likes. Very motivating.

Thomas E.
There is small progress. And thank you for the likes.

Thomas E.
Thank you for the likes. If you are interested ... cf. modellversium.de/gal..dene-hersteller.html
Soon there will be part II ... at least I hope so 🙂