Newsfeed
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:08
Miguel Vaquero
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
30 afbeeldingen
Polikarpov U-2/Po-2Nieuw: 12 October, 11:08 1:48
Progress so far
Project: Polikarpov U-2/Po-2
22 9 September, 18:39
Miguel Vaquero
Next proyect, this beautiful pre war plane. I've always liked this plane, so when I saw this kit fairly cheap I couldn't resist to buy it. I will make camouflage pattern, even though the book comes with two livery possibilities. This time around, the build Is going to be completely out of the box.
Next proyect, this beautiful pre war plane. I've always liked this plane, so when I saw this kit fairly cheap I couldn't resist to buy it. I will make camouflage pattern, even though the book comes with two livery possibilities. This time around, the build Is going to be completely out of the box.
15 September, 16:52
Miguel Vaquero
I don know what I'm going to do Ben. I love the stripes too, but I don't like the plain green camouflage. Maybe I'll combine the stripes with something different to at least use them.
I don know what I'm going to do Ben. I love the stripes too, but I don't like the plain green camouflage. Maybe I'll combine the stripes with something different to at least use them.
15 September, 19:50
Miguel Vaquero
I'm loving this kit so far. The only downside is the amount of flash, and that the fit with some of the parts is a little bit bad. Nothing that some time and love can't fix. I think so far it's turning out pretty good
I'm loving this kit so far. The only downside is the amount of flash, and that the fit with some of the parts is a little bit bad. Nothing that some time and love can't fix. I think so far it's turning out pretty good
21 September, 18:13
Robert Podkoński
Good job so far, Miguel. Keep it up! In fact, this type was used pre-war, during war and build in Poland (under license as CSS-13) post-war too. Here you can find some close-ups of the one kept in Herringsdorf collection:
Hangar 10 | Album by podkon
Good job so far, Miguel. Keep it up! In fact, this type was used pre-war, during war and build in Poland (under license as CSS-13) post-war too. Here you can find some close-ups of the one kept in Herringsdorf collection:
Hangar 10 | Album by podkon
23 September, 16:18
Miguel Vaquero
Thank you Robert. Those are some amazing photos. The striped engine is so cool, being able to see all the parts in its glory. I'm sure I'll use those pictures for the rigging later on. Here in Spain we also have one, and flying!! They are truly wonderful pieces of history.
Thank you Robert. Those are some amazing photos. The striped engine is so cool, being able to see all the parts in its glory. I'm sure I'll use those pictures for the rigging later on. Here in Spain we also have one, and flying!! They are truly wonderful pieces of history.
23 September, 16:51
Miguel Vaquero
Thanks Ben!
A lot of advances on the build now. I finally decided to make the box livery, and I'm not regretting It a bit, it just beautiful. All the main exterior paint is donde and decals in place. Although I'm a little bit bad with large decals, and I ended up painting the stripes with the airbrush. At the end I think its turning out lovely
Thanks Ben!
A lot of advances on the build now. I finally decided to make the box livery, and I'm not regretting It a bit, it just beautiful. All the main exterior paint is donde and decals in place. Although I'm a little bit bad with large decals, and I ended up painting the stripes with the airbrush. At the end I think its turning out lovely
23 September, 18:04
Miguel Vaquero
3/4 of the model done. Only left is the upper wing and rigging. Then some minor weathering this time and I'll call it good. I'm enjoying a lot this build. The only thing Ive had problems is the flash on smaller parts, and how delicate they are when removing that flash. Also some pieces have problems with fittings but is not the norm. Overall it's a really well designed kit, with some flaws, but nothing that cant be worked around
3/4 of the model done. Only left is the upper wing and rigging. Then some minor weathering this time and I'll call it good. I'm enjoying a lot this build. The only thing Ive had problems is the flash on smaller parts, and how delicate they are when removing that flash. Also some pieces have problems with fittings but is not the norm. Overall it's a really well designed kit, with some flaws, but nothing that cant be worked around
25 September, 18:35
Naimbs
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
79 afbeeldingen
Roland C.IIa Eduard 1/48Nieuw: 12 October, 08:42 1:48
Project: Roland C.IIa Eduard 1/48
17 4 March, 08:06
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:08
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:07
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:07
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:07
Dave Burgess
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
30 afbeeldingen
Bell P-76 (XP-39E) AiracobraNieuw: 12 October, 00:20 1:72
Bell Airacobra lineage: L-R: P-39Q; P-45 (P-39C); P-63 Kingcobra; P-76 (XP-39E). Although no P-76 aircraft were produced...
Project: 076 Bell P-76 (XP-39E) Airacobra
18 26 September, 02:48
Dave Burgess
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)
3 October, 16:59
Dave Burgess
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage
3 October, 23:01
Dave Burgess
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.
3 October, 23:02
Dave Burgess
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.
3 October, 23:05
Dave Burgess
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.
3 October, 23:09
Dave Burgess
Thanks, Robert. Y'know, the first time I decided to to a mod that required me to cut up a new kit, that was EXACTLY my reaction. I was terrified that I was going to destroy a perfectly good kit and have to throw it away. And that was only one kit - this one required me to cut up TWO!. Several decades of model building and multiple mods have given me the confidence to do these mods, knowing that while it may look a hot mess when it's in progress, with a little sheet styrene and some putty, I can pull it off, and most people wouldn't be the wiser.
Thanks, Robert. Y'know, the first time I decided to to a mod that required me to cut up a new kit, that was EXACTLY my reaction. I was terrified that I was going to destroy a perfectly good kit and have to throw it away. And that was only one kit - this one required me to cut up TWO!. Several decades of model building and multiple mods have given me the confidence to do these mods, knowing that while it may look a hot mess when it's in progress, with a little sheet styrene and some putty, I can pull it off, and most people wouldn't be the wiser.
4 October, 13:24
Dave Burgess
Step 6: Wing and fuselage have now been modified for XP-39E / P-76; Still looking a bit rough; some sanding to do before I mate the wing & fuselage.
Step 6: Wing and fuselage have now been modified for XP-39E / P-76; Still looking a bit rough; some sanding to do before I mate the wing & fuselage.
4 October, 19:53
Dave Burgess
Step 7: Modified fuselage mated to modified wing. more putty applied. I have to sand down the wing fillets, a couple of low spots on the wing underside, and feather in the new (P-51) tail into the rest of the fuselage. Then, my favourite job: painting and decaling! I'm still trying to decide whether to just paint the XP-39E as it is in the photos, or dress it up as a P-76 in US or Soviet markings (which is probably where the P-76 would have ended up). I'm leaning towards the latter, because the only photo I could find of the XP-39E is this B&W one.
Step 7: Modified fuselage mated to modified wing. more putty applied. I have to sand down the wing fillets, a couple of low spots on the wing underside, and feather in the new (P-51) tail into the rest of the fuselage. Then, my favourite job: painting and decaling! I'm still trying to decide whether to just paint the XP-39E as it is in the photos, or dress it up as a P-76 in US or Soviet markings (which is probably where the P-76 would have ended up). I'm leaning towards the latter, because the only photo I could find of the XP-39E is this B&W one.
5 October, 00:27
Dave Burgess
Three more rounds of putty & sanding to smooth out some rough patches; Canopy masked and attached; ready for airbrushing!
Three more rounds of putty & sanding to smooth out some rough patches; Canopy masked and attached; ready for airbrushing!
7 October, 02:28
Dave Burgess
So there it is folks! After a long chop, putty, much sanding, and just generally fiddling about, a P-39D converted to a XP-39E / P-76. Bell never actually got a contract for the Bell- P-76, which was what the XP-39E was to be designated when it entered production. However the production contract for 4000 aircraft was cancelled (to allow Bell Aircraft to concentrate on bomber production), but much of the development of the XP-39E ended up in the P-63, including the more powerful engine, lengthened fuselage and wings, and I believe the supercharger which was removed from the P-39's design, which was restored. The one adaptation in the XP-39E that DIDN'T get incorporated into the P-63 was the straight (clipped) wing tips and tail surfaces. All-in-all, it was a REALLY fun build, especially watching the ugly duck grow into a swan!
So there it is folks! After a long chop, putty, much sanding, and just generally fiddling about, a P-39D converted to a XP-39E / P-76. Bell never actually got a contract for the Bell- P-76, which was what the XP-39E was to be designated when it entered production. However the production contract for 4000 aircraft was cancelled (to allow Bell Aircraft to concentrate on bomber production), but much of the development of the XP-39E ended up in the P-63, including the more powerful engine, lengthened fuselage and wings, and I believe the supercharger which was removed from the P-39's design, which was restored. The one adaptation in the XP-39E that DIDN'T get incorporated into the P-63 was the straight (clipped) wing tips and tail surfaces. All-in-all, it was a REALLY fun build, especially watching the ugly duck grow into a swan!
12 October, 02:13
Taffy_3
is eigenaar van dit item
is eigenaar van dit item
S.E. 5a / Albatros D.III The Great War
Italeri 1:72
1374 2015 Nieuwe onderdelen Meervoudig onderwerp (2)12 October, 11:05
Connor Macleod
is eigenaar van dit item
is eigenaar van dit item
Československé Patnáctky (Mig-15, 15bis) Super44 - Dual Combo!
Eduard 1:144
4441 2014 Nieuwe onderdelen 12 October, 11:04
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:04
Connor Macleod
heeft dit item gemarkeerd als te ruilen/te verkopen
heeft dit item gemarkeerd als te ruilen/te verkopen
12 October, 11:04
Connor Macleod
is eigenaar van dit item
is eigenaar van dit item
Gift Set No.1
Czech Aircraft (Avia B-534, Spitfire Mk.IXe, MiG-15, MiG-21)Eduard 1:144
7117 2015 Nieuwe markeringen Meervoudig onderwerp (4)12 October, 11:04
Kesa Tiho
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
16 afbeeldingen
Leopard at the berlin wallNieuw: 11 October, 22:30 1:35
Finally got the entire thing done, my first actual diorama, some more weathering could be applied and some wash to the g...
Project: West german tank at the Berlin wall
10 7 October, 12:20
Michael Kohl
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
7 October, 12:49
Kesa Tiho
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
7 October, 13:21
gorby
Nice work Kesa, it is your best so far. The tools on the tank are particularly well painted.
Nice work Kesa, it is your best so far. The tools on the tank are particularly well painted.
11 October, 07:14
Kesa Tiho
Thanks gorby, though usually my detail painting takes the builds down a notch. Im glad it didnt seem to happen this time 🙂
Thanks gorby, though usually my detail painting takes the builds down a notch. Im glad it didnt seem to happen this time 🙂
11 October, 11:09
Martin Oostrom
Take it slow young one. Your skills will get better with each build. Build, build and build. One day you'll outclass Master Gorby
Take it slow young one. Your skills will get better with each build. Build, build and build. One day you'll outclass Master Gorby
11 October, 17:23
Kesa Tiho
I am taking it slowly, sire. If i ever do surpass master Gorby then it will take years, decades, millenniums maybe.
I am taking it slowly, sire. If i ever do surpass master Gorby then it will take years, decades, millenniums maybe.
11 October, 17:35
gorby
"Master" me? There are many, many more on here with infinitely more skill.
If you stick with modelling Kesa you'll surpass me in a couple of years easily judging by your recent progress.
Well done on your diorama, it looks good. 👍
"Master" me? There are many, many more on here with infinitely more skill.
If you stick with modelling Kesa you'll surpass me in a couple of years easily judging by your recent progress.
Well done on your diorama, it looks good. 👍
12 October, 06:56
Kesa Tiho
Well you are like a master in my eyes, just look at your builds. Your entire wall is a minefield of 10/10 builds man. Sure with everything theres someone better but i feel like with this hobby you are either better at painting (aka weathering, painting, paint detail) or glueing (how clean the build looks before painting, how strong the build is) , for example mr.james is better at painting than you and Steven van dyck is better at glueing than you but to this day i havent seen anyone do both better than you.
And thanks, i have been getting better at this, if my 6 year old self could see what ive made now hed probably be very mildly impressed
Well you are like a master in my eyes, just look at your builds. Your entire wall is a minefield of 10/10 builds man. Sure with everything theres someone better but i feel like with this hobby you are either better at painting (aka weathering, painting, paint detail) or glueing (how clean the build looks before painting, how strong the build is) , for example mr.james is better at painting than you and Steven van dyck is better at glueing than you but to this day i havent seen anyone do both better than you.
And thanks, i have been getting better at this, if my 6 year old self could see what ive made now hed probably be very mildly impressed
12 October, 08:08
gorby
Nice of you to say Kesa, but when I look on Scalemates I'm constantly astounded by models I could hope to equal.
Nice of you to say Kesa, but when I look on Scalemates I'm constantly astounded by models I could hope to equal.
12 October, 08:20
Martin Oostrom
I think most modellers see someone that's better in their own eyes.
Be inspired by a better builder, and when you are just as good, be inspired by the next better builder.
I think most modellers see someone that's better in their own eyes.
Be inspired by a better builder, and when you are just as good, be inspired by the next better builder.
12 October, 10:59
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo