Newsfeed
Friedrich Klett
markeerde dit item als in bestelling
markeerde dit item als in bestelling
Douglas A-20G Havoc Over Europe - marking & stencil masks HK Models
1ManArmy 1:32
32DET028 2023 Nieuwe mallen 4 October, 07:37
Dave Burgess
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
7 afbeeldingen
Bell P-76 (XP-39E) AiracobraNieuw: 3 October, 22:57 1:72
Project: 076 Bell P-76 (XP-39E) Airacobra
5 26 September, 02:48
Dave Burgess
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)
3 October, 16:59
Dave Burgess
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage
3 October, 23:01
Dave Burgess
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.
3 October, 23:02
Dave Burgess
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.
3 October, 23:05
Dave Burgess
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.
3 October, 23:09
jan zumack
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
250 afbeeldingen
Stinger mantis from Jedi survivor 1/50 full Scratch build Nieuw: 4 October, 07:33 Lights on
116 6 October 2023, 17:35
jan zumack
Hi spanjaard, yes i do. This ist a complete Scratch build. At the end the ship will be 790mm Long. I am crazy, i now.
Hi spanjaard, yes i do. This ist a complete Scratch build. At the end the ship will be 790mm Long. I am crazy, i now.
7 October 2023, 05:43
Vincent
This is looking amazing. Very nice subject and building skills till now. Looking forward to see where it is going.
This is looking amazing. Very nice subject and building skills till now. Looking forward to see where it is going.
9 October 2023, 12:24
Ben M
I definitely want to watch this. The scratchbuilding looks great. Yes, this project will definitely take some time to complete.
I definitely want to watch this. The scratchbuilding looks great. Yes, this project will definitely take some time to complete.
13 October 2023, 13:32
Freak
What an incredible project! This looks like a masterclass in scratchbuilding, can't wait to see what's next!
What an incredible project! This looks like a masterclass in scratchbuilding, can't wait to see what's next!
13 October 2023, 18:29
Alexander
Holy.. this looks amazing so far!👍👍
Definitely watching how this unfolds!
Holy.. this looks amazing so far!👍👍
Definitely watching how this unfolds!
17 October 2023, 21:34
Stephan H.
This is so great! I am throwing my 3D printer out of the window and try learning something here 😉
I also loved the ship design and how parts move during flight.
Viel Erfolg
This is so great! I am throwing my 3D printer out of the window and try learning something here 😉
I also loved the ship design and how parts move during flight.
Viel Erfolg
19 October 2023, 06:59
Treehugger
Final model looks like it might perhaps be heavy, can the landing gear handle the weight?
Final model looks like it might perhaps be heavy, can the landing gear handle the weight?
10 January, 18:17
jan zumack
He treehugger, i tested the legs with 2kg per leg, i hope it is enough. If its not i drill in a seperat roundsteel to Catch the weight.
He treehugger, i tested the legs with 2kg per leg, i hope it is enough. If its not i drill in a seperat roundsteel to Catch the weight.
12 January, 18:48
Peter G
No 3D printer? Are you using a cutting machine? How do you get such precise cuts? Loving it!
No 3D printer? Are you using a cutting machine? How do you get such precise cuts? Loving it!
16 January, 11:48
jan zumack
I use an old drawing bord to Cut the pieces i need. And Stripes, tubes and rods from evergreen.
I use an old drawing bord to Cut the pieces i need. And Stripes, tubes and rods from evergreen.
16 January, 19:52
jan zumack
Thank you all for your kindly words. I am suprised by my self of the result of the Projekt so far.
Thank you all for your kindly words. I am suprised by my self of the result of the Projekt so far.
3 May, 18:53
Skyhiker
Picture 210 looks like a boom box. I wonder what kind of funky music would come out of that?
Picture 210 looks like a boom box. I wonder what kind of funky music would come out of that?
17 May, 11:05
Alec K
Wow, just found this and what an incredible project! Just fantastic, thank you for sharing it here 👍
Wow, just found this and what an incredible project! Just fantastic, thank you for sharing it here 👍
29 July, 17:05
damien bresso
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
2 14 October 2021, 12:02
Georges henrion
Salut Damien
Tu n'as pas fini la restauration, le projet est abandonné?
Salut Damien
Tu n'as pas fini la restauration, le projet est abandonné?
4 October, 07:32
Pieter van Manen
heeft dit item voltooid
heeft dit item voltooid
Aircraft Weapons: IV US Air to Ground Missiles
Hasegawa 1:72
X72-4 (X72-004) 1983 Nieuwe mallen Meervoudig onderwerp (12)4 October, 07:27
Pieter van Manen
heeft dit item voltooid
heeft dit item voltooid
S-3B Viking VS-22 CAG
SuperScale International 1:72
72-893 4 October, 07:26
TheDoctor
wil dit item
wil dit item
F-105 (G,D) Thunderchief nose cone with pitot tube for HobbyBoss kit (3D Printed)
ResKit 1:48
RSU48-0429 4 October, 07:26
TheDoctor
wil dit item
wil dit item
F-105 (G,D) Thunderchief nose cone with pitot tube for HobbyBoss kit (3D Printed)
ResKit 1:48
RSU48-0429 4 October, 07:26
Pieter van Manen
heeft dit item voltooid
heeft dit item voltooid
Lockheed S-3A Viking US Navy Anti-Submarine Aircraft
Hasegawa/Hales 1:72
JS-142 (K13) 1979 Nieuwe doos 4 October, 07:25
Pieter van Manen
heeft dit item voltooid
heeft dit item voltooid
A/A42R-1 Refueling Pod Set for F/A-18E/F & S-3
Wolfpack 1:72
WP72069 2015 Nieuwe mallen Meervoudig onderwerp (3)4 October, 07:25
TheDoctor
wil dit item
wil dit item
OV-10A Bronco cargo bay for ICM kit (3D Printed)
ResKit 1:48
RSU48-0188 4 October, 07:25
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo