Newsfeed

Ekki
Following

Finn
Me too

Guy Rump
Me as well. 👍

DerMattes
Following as well.

Glynn Jacobs
VERY nice work!

Cristian A
Excellent project, watching. The Argentine Étendard aircraft were effective in causing significant damage during the Falklands/Malvinas conflict.

Michael Kohl
Following

Gerald
Hello Welcome here 🙂

PM27
Thank you

Martin Oostrom
I spent a couple of hours cleaning up some parts that I cut of the frame

Bozzer
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍

Martin Oostrom
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.

Martin Oostrom
And primer is on after a monster session. 200ml primer + 50ml SLT = just enough.
Primer is zero paints grey. But a dirty grey.

bughunter
Watching!

Martin Oostrom
Tamiya Bright Red for the chassis and Zero stone grey as main colour for the interior

Martin Oostrom
The Zero stone grey was a bit depressing, so I mixed a batch 50/50 with white to lighten things up a bit.
Tamiya aluminium was airbrushed, and Tamiya black as well.
Done with airbrushing for now. Letting the paint cure before decalling.

Qwertzel
Looking great so far!

Bozzer
Bravo mate!
Are those bolt heads, part of the kit?

Martin Oostrom
Thanks lads. The bolt heads are kit parts. Just moulded on.

Bozzer
That's pretty good moulding. I thought they were PE mate.
I'll get some pictures up myself, tomorrow, of what I've been up to?
It's been a rollercoaster, that's for sure!

Goldman
Great progress with the DAF

I do hope Revell will re-release all of its classic and colorful kits like this one. It will looks amazing with all the decals.

Martin Oostrom
Started with the decals. They're a bit older and fragile. Should have read the instructions better. Would have made life a bit easier now.
I don't know what Revell were thinking, but some of the curves are too steep for these decals. It takes a lot of softener, a hairdryer and a boatload of patience to get them right. Even then they tore in places. And I've only done 5 pieces.

Bozzer
Sorry to hear about your bad experience mate.
However, it's definitely made a difference, and I know, that it looks bloody fantastic!
This is why I'm not a big fan of decals. It's the worst part of any build, for me. Hence why I push myself, with my airbrushing? But, I have to be in the correct mood, in the correct conditions.
The decals on my Turnpiker, were terrible. The amount of decals softener that I used, started to affect the clear coat. Next time, I'm going to airbrush everything, and then put them both together, so you guys can give me your honest verdict.
But to try and airbrush those beautiful decals, that you have there, would take me years!
Do you think, you would have been better trying to copy them on your own decal paper, and trying it that way?

bughunter
What I hate most about working with decals is the fact that there are no spare ones (at least for older, no more available kits).
So I wish you a huge amount of patience and luck! Take care, it will look great 👍

Martin Oostrom
The overall quality of the decals is well enough. Thin, almost no decal film on the edges. It's just that on the rear of the cab, the trenches are so deep. Luckily this is the only part that has this. The roof has some extending bits, but there are seperate decals for those.
My life would have been a bit easier if I'd read the instructions more carefully. Revell wants you to decal some pieces, before glueing. That way all edges are nicely covered. I'm an advanced modeler, so I just did my thing...

The artwork on this one is a bit too complicated to airbrush, it would take me more than a few years.
It might take some time, but I'll finish this job in the end 😄

bughunter
If nothing else works read the F$!%ing Manual !🤣🤣🤣

Goldman
Before starting to use a complex or questionable decal sheet I take a high resolution photo of it with my phone (an old school flat-bed scanner will be even better). My reasoning is that if I mess the decals I would be able to print a new sheet somehow. Luckily never had to actually test this theory so far...

Martin Oostrom
RTFM is overrated.
Good idea Goldman. Should give that a go on future builds.

Martin Oostrom
Decals on the cab are done. Helluva job

Bozzer
Cracking job, on that cab, mate!
I'm glad you opened up the grill, it makes a hell of a difference!
Take your time with this now, because it'd be a shame if something went wrong, at the final fence?
This was always destined to be an epic build. I can't wait to see it married upto the trailer

bughunter
Marvellous!

Martin Oostrom
I found the missing decal for on the nose. That'll need placing and then it's onto the trailer

Christian W
When I see the decal work I know, why I'm not building racecars. I'd going crazy with all the roundings and millions of decals.

Martin Oostrom
Mr Topcoat straight from the can. A bit grainy after the first coat. Better after the second.

Ben M
Wow, amazing decal work!

Kesa Tiho
Certainly looks like a truck, gotta give you that

Goldman
Smoooooooth... Really good results from a can. Tried to paint a model with a can a few times - always ended with tears

Martin Oostrom
Started assembly of the truck. Done a lot, more to do. I dread the sanding and polishing of the cab

Kesa Tiho
I believe in you martin!

Spanjaard
it will be a beautiful truck, no doubt about it! 🙂

Martin Oostrom
I did a light sanding and polishing on the truck. I'm not going to ruin it a this stage.

Rui S
Looking good 👍

Bruce Huxtable
Nicely done, indeed! Are the tracks in this kit 'length and link'? Very neatly assembled 🙂

gorby
Nice work Mick. Are you going to do a dio or base for it?

Mr James
Nice work. Not seen this unusual beauty.

Mick Burdett
Thank you Mr James. Mirage kits , I believe from Poland

Neuling
Seldom seen, well done!

gorby
Nice dio Mick. Good work on the figures.

Mick Burdett
Thanks for comments gentlemen, working on Marder 1 at moment, will put album on soon

Villiers de Vos
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.

Alex Rakhimgulov
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))

Doubtingmango
Nice practice!

Alex Rakhimgulov
Thanks! )

Joe
Looks great! How are you making the weld beads?

Alex Rakhimgulov
Thanks, Mate!
I try to make weld beads like on my favorite YT cannel )))
1) I make a groove with scraiber, if it necessary on the plane surfaces.
2) Next, i prepare 2 component putty, and make a thin "laces" out of it.
3) After that, I carefully fill the grooves and angles with putty "laces" and apply welding texture with special tool (toothpick with tip warped with brass sheet, witch forms small speared C shape).
That is all.

Joe
The outcome looks very realistic, thanks for the explanation!

Doubtingmango
I think I'm in love with the hatch detail

Villiers de Vos
Fantastic work.

Alex Rakhimgulov
Thanks, Friends! It is a really exciting and addictive process )))
I would like too ask, can anyone tell me, how to paint a "glass"? I mean, i need to imitate a glass on the headlight, and i can't find info, how to do it.

Doubtingmango
I do a mix of light blue, light beige and white. Using only white is just too stark. Hit it with a little clear gloss, and then a grimy wash. Still doesn't compare to the kits with the clear plastic lens covers, but doesn't look bad.

Alex Rakhimgulov
Thanks for info, Mate! Will try your way.

Bohrmann
The 'painting exercise' is a success. Well done! 👍🏻.If this is an exercise then I am already looking forward to your 'for real work'😉

Alex Rakhimgulov
Thanks for kind words! Enjoying every new step on this way! Next goes Tiger )

Guy Rump
Great job! 👍

Alex Rakhimgulov
Thanks!

Thomas Kolb
Taking a seat here!

Живко Джаков
I'm watching too.

Nicolas
A finnish 109? I'm in!