Newsfeed
TAKUJU SUGAWARAwil dit item
Lockheed T-33 ROCAT Ejector Seats
Air-Graphic Models 1:72
AIR.AC-166 8 November, 22:49
TAKUJU SUGAWARAwil dit item
Sargent Fletcher F-80/T-33 tip fuel tanks
AVM Scale Models 1:72
2019 Nieuwe onderdelen Meervoudig onderwerp (2)8 November, 22:48
Ian Andrewsis eigenaar van dit item
ODAB-500 PM (2pcs) MiG-21, MiG-23, MiG-27, Su-17, Su-24, Su-25, Su-24, Su-34 
ResKit 1:72RS72-0306 2021 Nieuwe mallen
ResKit 1:728 November, 22:44
Dal Pont Andreais eigenaar van dit item
F/A-18 Switzerland Panthers Special Scheme - Masks And Decals Set
ModelMaker 1:72
MD72207 8 November, 22:43
Stéphane Jayetheeft een nieuw fotoalbum toegevoegd.
39 14 July, 16:30
Stéphane JayetPromising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Stéphane Jayet@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
12 October, 11:48
Stéphane Jayet@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
12 October, 11:53
bossy122Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
13 October, 03:03
Stéphane JayetHello, I made a kind of combination. Since I was afraid not to get the same yellow colour, I printed the pinstripe on white decal paper, when cutting it I let a small part of the white to have it clean. The difficult part was to have no white on the other side. I had to cut and redo couple of times.
Unfortunately, I realised later that I should have done differently as it was very difficult /impossible to have the large black part parallel to the pinstripe....
22 October, 09:03
bossy122Shunko made decals for the Tamiya kit, but of course, they're no where to be found.
22 October, 18:34
Dal Pont Andreais eigenaar van dit item
Dassault Mirage 2000C/2000-5
Martin-Baker Mk.10Q - Ejection Seat 3D Printing ResKit 1:488 November, 22:30
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo