Newsfeed

Oleg Bogolei
amazing work....

Mid Franconian
I need to watch this!

Cuajete
Me 2!

J35J
I'm in!

Łukasz Gliński
Me 4, might be my reference in the future 👍

Robert Podkoński
High five!

Nicolas
Joining.

Marius
And I thought starting my third such kit from KP/RV Aircraft is self torture. The truth is, once you had finished one of them in the past, the frustration decreases with each new one.

Any idea how you will treat the taxiing lights?

Thomas Kolb
Marius, I honestly don't think this kit is so terrible. There are some fit issues for sure, but I have built much worse kits. I constantly keep reminding myself that I only do this for relaxation and fun, and not for a competition or as a profession.

Are you referring to the swiveling landing lights underneath the intakes?

Marius
Thomas, I share your opinion about the kit and hobby too actually. The kit is dreadful in a few areas, but overall more than decent. I finished two of these already and I must say, they really stand out my collection, despite the kit's reputation.

Yes, I was refering to those lights. If I remember it correctly, there are some transparent parts included in the kit, but the intakes are completely flat, where the lights should go. I made the mistake to install those lights in the closed position, instead of the more interesting setup, when they are deployed downwards. In any case, it's just a heads up, in case you might want to add some extra detailing.

Thomas Kolb
Yes, I see your point regarding those lights, but I will probably just stick to my usual middle road - easy to accomplish and still produces a cool result. 🙂

Martin von Schreckenstein
haha, love the topic and kit selection. you are definitely more meticulous than I was 🙂

Thomas Kolb
Martin, I saw your MiG-23 project - it is way more ambitious than mine! I am not so meticulous, just very, very slow, only having an hour or two to spend here and there.

Thomas Kolb
A bit of a setback here. I just realized that I had foolishly been following the assembly drawings and thus ended up with the wings upside down. Bottom side up and vice versa. It may not be something that is easily noticeable, but knowing myself, I would never be able to unsee it now. So I am backtracking my steps and need to change the way the wings are facing without ruining the fuselage. Mamma mia, what a noob mistake-a to make-a.

Łukasz Gliński
Great you found it out before it was too late. I see we used to watch the same TV series 😄
[img1]

Dave Flitton
Watching!

Thomas Kolb
Łukasz, yes, haha, you found the hint.

Finn
I'm in

Jiri Vybihal
good luck 😄

Guy Rump
I'm in too. 👍

Cuajete
Good job with the air intakes 👍

S M
I'm in! I'm also working on KP's MiG-23 and had the same issues with fitting and wings. Damn I didn't notice that the wings are upside down...

Cristian A
I'm taking a sit as well 🙂

Thomas Kolb
Thank you gentlemen for your encouraging words! 🙂 The twin seater assembly is done, and now I need to finish the single seater. I am now thinking about which individual aircraft to represent and which camo to use.

aetios
This is looking great. watching with interest!

Cuajete
I agree with @aetios 👍

Cristian A
Hi Thomas, nice progress. I think the Tamiya paints are my favourite so far. They apply well and they don't smell so strongly.

Thomas Kolb
Cristian, yes, they are mine too. They also react superbly well to the Mr Color Leveling thinner and level out to perfection. Too bad that the color range is a bit narrow, you need to mix almost everything.

Cristian A
Thanks for the tip Thomas, I recently discovered Tamiya paints. The hobby shop seller recommended "Aqueous Hobby Color Thinner" and using that works well also.

Mirko Römer
Respect! 🙂

Michael Kohl
Following

Thomas Kolb
Damit, ran out of white paint.... I decided to also order the Mr Paint Hungarian set to see if they are any good.

Łukasz Gliński
Mr Paint is grand, but more stinky than Tamiyas

Mr D
If l cut an item of the spru and it has a possibility of mix up, l up a little bit of making tape with part number on it to label it up, l do this as made this mistake before with wheel bay doors !! " Wanded when so much sanding needed!" 😆.
Every build has it's niggle...once it's been on shelf a month...soon forget, good work

Thomas Kolb
Mr D, yes, it's a good tip. But it doesn't help when the assembly drawing is wrong! The best is to constantly keep referring to real photos - sometimes even apex companies, such as Tamiya, Special Hobby or Eduard make silly mistakes.

Mr D
I know, I'm doing a Tamiya and they missed of colour required for 3 different parts!

Thomas Kolb
The masking of the standard single seater is a pretty relaxing task, but Iván The Terrible (no 20), with its blotchy, multi-color camo is proving a real challenge. I am trying to add the colors in the order as they were applied on the real aircraft to make the pattern realistic, but man, it is tricky!

Ekki
Following.

aetios
Hey Thomas I wonder how you got the camo masking so clean, mind sharing some insights?

Robert Podkoński
Watching with interest.

gorby
I'm confused. The kit mentions that it comes with waterslide decals or are you commenting on the kit you own?

Edmond Holcombe
There are no decals inside the box.

gorby
Does it mention or show decal placement in the instructions?

Edmond Holcombe
Of course it does. The kit was an open box when I received it, with no decals in the box. That note is for me, it's in my stash and not up for sale.

gorby
I mention it because you've posted the comment so that everyone who looks at this kit will think it doesn't come with any decals. The comment section isn't intended for everyone to keep track of the kits in their stash, it's for general comments about the kit that they would like to share with other members of the site with an interest in that particular kit.

Stuart Fowle
Great looking build and finish 👍

Zbynek Honzik
Great job!

Dave Flitton
Nice!!

George Williams
Sorry Vulcan fans, this the best looking V-Bomber.

Robert Podkoński
I agree with George... Fantastic model!

Guy Rump
Great job! 👍

Björn Leichsenring
Awesome built.

Neuling
Very beautiful. Super clean.

Spanjaard
fully agree with Neuling

Spanjaard
beautiful

Zbynek Honzik
Nice!

Spanjaard
superb!

Zbynek Honzik
Great job in this scale! 👍

Spanjaard
fantastic

TH SCALE MODELS (Thomas Haberl)
That is art! I have to take a first row seat here and see the progress. Very impressive 👍

Spanjaard
certainly not going to miss thus master class

Dave Flitton
Wow, watching!!

Skyhiker
Right on!

Greg Baker
Oh, sign me up. I'd watch F_IV do the laundry.

Robert Podkoński
I will follow this talent show with pleasure.

gorby
Lovely work.

Michael Kohl
Surely another build that will leave me speechless and striving to come closer to this level.

William Adair
Omg thanks everyone. You guys are the best! I'm interested to see how this one comes out. I'll add more progress soon. 🤞

Ludvík Kružík
I like old planes from the early days of aviation. Your scrathbuild is fantastic. I admire how you can render all the little details in this scale. I wish you continued success in building this model and look forward to the sequel.

Bruce Huxtable
Your talents are beyond my comprehension.... Totally amazing scratch building 🙂 This little gem is already gorgeous🙂

Shar Dipree
Great work so far! 👍👍👍👍

bughunter
Another great little bird in that microscopic scale 👍

William Adair
Added a new pic. Starting on the cockpit details 👌

Bruce Huxtable
More micro-perfection. Astonishing 🙂

Michael Kohl
By the way: will your book be available in Telford in November?

William Adair
Hi Michael, I'm not sure. It should be out by then but I don't know if any sellers will be stocking it. I live in Australia unfortunately, so Telford is well outside my maximum range 😢

William Adair
Added the large control wheel to the pilot's cockpit from soldered wire and heat curved sprue. I like the little brass hub in the middle 🙂

Skyhiker
You seem to have really good control over your soldering. What tools do you have? That control wheel is impressive.

gorby
The many years training to be a jeweler probably helps. 😄

William Adair
@Skyhiker I have an inexpensive soldering iron from an electronics store. It is nothing special, but the best thing I have is liquid soldering flux. Using that allows the solder to grab the surface and stick without requiring too much heat or flooding the area with solder.

@gorby Being a jeweller helped at first. But now I am finding that the modelmaking is helping me be a better jeweller! 👍

Alec K
Outstanding work! The book is on order 👍

William Adair
Wow, thank you Alec! Hopefully it will be in your mailbox soon 🙏
I added a few more pics. Test fitting the undercarriage and one of the prototype wheels.

Christian Bruer
Outstanding craftsmanship. I really like your tiny scratch built projects 👍

Michael Kohl
Me too.
But obviously he doesn't show how he did the wheels to prevent us from fainting. 😉

Skyhiker
I just don't get how its possible. Really man, you need to get a life or something. This shit is just way too good!

Mr D
Wow, what scale👌, l struggle to build a 1:72 without breaking of a tail wheel or antenna 🤣.
Really nice n interesting subject 👍👍

Skyhiker
Where do you get your blueprints?

William Adair
@Michael Kohl, I made an album about the wheel back in January, showing the stages of construction. Spoked wheel test, 1/144 | Album by F_IV
@Skyhiker, Windsock Datafiles provide the best drawings. I also use the 3-view drawings from the Wingnut Wings kit for some areas.

Zbynek Honzik
A masterpiece is being created here!!! Scratchbuild at this scale and this quality! Unbelievable! Bravo! 👏👏👏

bughunter
Great progress 👍
I have a kit in 1:48, but your build looks much better and has more details!

William Adair
Thank you, it's slowly coming along. Adding more details now that the main components are painted. It's always my favourite part of a build. 🙂

Mr D
Great " Little" project this one, brilliant work 👍👍

Ludvík Kružík
That's beyond me. How can you make such perfect little things in this mini scale? You have my great admiration. 👍

Alec K
Same here! Paint looks superb 👍

Łukasz Gliński
Can't agree more w/Ludvik, my Eyeballs Mk.I woudln't allow that. What Mark are you using? 😉

William Adair
Lol, my eyesight is rubbish these days. I'm using +6 reader glasses from ebay to compensate 😉
Added a picture of the new seatbelts, made from .1mm wire and painted cigarette paper. 👍🏿

Alec K
Wow, those seatbelts! My copy of your book is finally shipping, can't wait. And I empathize with your eyesight woes: i am +3 on glasses plus +2 on optivisor 😢

Bruce Huxtable
Beyond astonishing! If ever I need a Brain Surgeon....

William Adair
Added the surface texture to the cowling using a sharp Pearl-grey pencil and an aqueous satin clear coat to seal it 👍

Roland Sachsenhofer
Boah! This is the best thing I've seen so far - thank you for this pleasure! I will definitely follow it.

Michael Kohl
Surface textures as this are rarly seen done convincingly. Yours is an excellent one.

Robert Podkoński
You're a wizard, William... this is all far beyond my sight abilities, not only my skills...

Ludvík Kružík
Phenomenal project! What you are doing here in this mini scale is amazing. 👍 You don't see this kind of detail work too often even on larger models.
I suppose giving fleas horseshoes isn't a challenge for you. 😉

Alec K
Excellent progress. I have finally received, and am about halfway through reading, William's excellent book. To those interested in how he does what you see in this album, I can wholeheartedly recommend it. I am certainly planning to incorporate many of his techniques into my own scratchbuilt projects. How he does what he does in 1:144 scale is still a mystery to me (although the book supplies hints 😉), but they are applicable across any scale really. Well done!

fonthill.media/en-us..H8pwXYRicTk5zfkw0RWx

Ben M
Good to see this one come up again. The "giraffe" finish on the metal nose is perfect.

Spanjaard
Here you have the link, without tracking part.... fonthill.media/colle..roducts/ww1-in-scale

Christian Bruer
This is such an amazing work. I much admire you skills doing such a crips and fine work in scale onefourfour 👍

William Adair
Thanks guys for the very kind words. It's been a huge challenge but it is slowly getting there!
@Alec, I'm so happy that you are enjoying the book. I just got my copy the other day too 🙂

Mr D
The scalpel blade really shows the scale, be no good for my chunky hands, l stick to 144 to my small scale 🤣🤣
Good quality for it's size., No reason to run out of room Building at this scale 👌😁👍

Greg Baker
I always blink twice when I see William's builds... tiny little beauties! As a 1/144 scale fan, they warm my heart.

Zbynek Honzik
I just keep looking fascinated at the next procedure and say BRAVO! 👏👏👏
This defies the normal laws of physics...

Matthew A
My copy of your book just arrived. Wow! One question - where do you get your two foot long matchsticks from? 😋

William Adair
Lol, right across the road from Giant Coin World 😛
Hoping to be ready to start the rigging in a few more weeks (if all goes well). Added a new header pic, showing where it started, versus where it is now .

Erik Off
Speechless.
How do you hold/fix such tiny parts to work on them?
Wow, just wow. Oo

Michael Kohl
Truly amazing.

William Adair
Hi Erik, cheers! Sometimes I just use a tiny dab of water to hold parts while I am test fitting them or getting ready to glue. The capillary action holds the parts while I'm swapping hands from tweezers to glue. Since I started doing that, I've spent 75% less time on the floor looking for lost parts. Other times I make a simple holding jig from scrap plastic to align parts. It saves a ton of time and frustration.

Mike Szwarc
Amazing tiny work! Beautiful!!

Alexander Grivonev
Work of art

Pepe
😳😳😳😳

Bruce Huxtable
Pure jewelry 😍

Mr D
Been an inspiration and learning experience watching.
I like the odd 1:144 but this is next level X2 🤣
Great well done 👍👍

Rui S
Excellent 👍

Spanjaard
breathtaking, wow....