Newsfeed
Rudy Poseikaheeft een nieuw fotoalbum toegevoegd.
12 afbeeldingen
Stearman Kaydet
1:72
I used a piece of stretched sprue for the rear cockpit glass top as the clear plastic tore off when cut from the sprue
Project: Stearman Kaydet
6 7 October, 18:09
Rudy PoseikaFirst time since getting back into making models last year - bought after market decals(on order). I have still to choose paint scheme and which decals.
7 October, 18:11
NicolasI realy like the Stearman, following with interest. I hope to start building mine (Pavla) next year.
7 October, 19:02
Rudy PoseikaThe parts are all there on sprue but did not match what the instructions indicated about the sprue parts.... 🙂 !
7 October, 19:20
Rudy PoseikaI got what I ORDERED, not what I wanted!!! I guess I missed the part number for what I ordered was for a Stearman Kaydet 0- it was just for a 1/32 model !!! The web site HAS what I wanted but am not ordering again....
Back to OOB. 🙁 :}
15 October, 22:38
SkyhikerYou should spray white on before applying yellow. Yellow is almost always translucent and needs a decent color underneath. Grey underneath will make it look dirty and give it a green tint and it will be impossible to put enough layers of yellow on to cover the grey.
27 October, 20:00
Rudy PoseikaThe yellow look is not what was expected but it does have depth. I may try a few tricks closer to completion.
27 October, 22:40
Calvin Giffordmarkeerde dit item als in bestelling
J.A.S.D.F. Weapons Set A
Hasegawa 1:48
36010-1500 (X48-10) 2005 Nieuwe mallen Meervoudig onderwerp (8)28 October, 22:52
Andrea Brencoheeft een nieuw fotoalbum toegevoegd.
28 October, 22:43
Eric SilbaughCan we get a 1/72 version..
23 October, 17:30
Antony TheocharidisThere is already a 1/72, also from Arma models. There's also a Navalised version of it in 1/72.
24 October, 10:02
Antony TheocharidisUnfortunately Arma Models is russian so it might be very difficult to get them right now, especially since they already sold to very few re-sellers even in Europe before the current events. Maybe try ebay sellers?
25 October, 20:32
Sprue LegendTry contacting i-modelist. I have been able to get kits through them. Got the Ka-52 preo order with all the 3Dprinted Am parts an an arma model Kinzhal off them. Shipping took about a month with Russian post.
28 October, 10:14
Sprue LegendI ve just spoken to i-modelist and they told me that they will do it. I am also tempted by the Mi-28 but I will hold out for the zvezda injection molded version
28 October, 22:52
Rogerbegon dit item
German
Steyr Type 1500A Kommandeurwagen sgl. Pkw Steyr Typ 1500A Tamiya 1:35
35235 1999 Nieuwe onderdelen 28 October, 22:51
Bat X21wil dit item
KHD A3000, Magirus S330, KHD S3000, KHD S3000/SS M Maultier interior 3D decals
Quinta Studio 1:35
QD35028 2022 Nieuwe mallen 28 October, 22:46
Howard Clarkeis eigenaar van dit item
Sexton Self Propelled Artillery 3x Sexton models /w figures
Plastic Soldier 1:72
WW2V20029 2018 Nieuwe mallen 28 October, 22:44
Stéphane Jayetheeft een nieuw fotoalbum toegevoegd.
39 14 July, 16:30
Stéphane JayetPromising kit replacing glue by screw in many cases, but there are some moulding issue, so parts have to be well prepared.
16 July, 11:27
Stéphane Jayet@george, during my vacations for 2 weeks I installed some books on it and it is now almost ok
10 August, 14:59
bossy122How will you do the black pinstripe? That is what has always kept me from trying this kit.
12 October, 06:42
Stéphane Jayet@George, I like this engine as well, and I don't remind a kit where the belts are really belt (not plastic formed with the pulleys).
12 October, 11:48
Stéphane Jayet@bossy122, frankly speaking, I don't know yet. 2 options on the table : option 1 is to cut the decals from the box, option 2 is to do some masking (using tracing paper on the original decals). Option 2 is my preferred option so far.
I already painted the body twice because I had some issues with the masking tape (removing the paint), so hope it will work at first try....
12 October, 11:53
bossy122Can you copy the kits pinstripe then print your own? A little white on one side and a little yellow on the other, covering up any tapes leaks as well.
13 October, 03:03
Stéphane JayetHello, I made a kind of combination. Since I was afraid not to get the same yellow colour, I printed the pinstripe on white decal paper, when cutting it I let a small part of the white to have it clean. The difficult part was to have no white on the other side. I had to cut and redo couple of times.
Unfortunately, I realised later that I should have done differently as it was very difficult /impossible to have the large black part parallel to the pinstripe....
22 October, 09:03
bossy122Shunko made decals for the Tamiya kit, but of course, they're no where to be found.
22 October, 18:34
Daniel Olsonwil dit item
1969 Camaro Z28 Detail Set for RMX (Photo Etched)
The Model Car Garage 1:12
MCG-2180 28 October, 22:38
ICM 1:48
scrennellwil dit item
2006 Nissan 350Z The Fast And The Furious
AMT/ERTL 1:25
38511 2006 Nieuwe mallen Meervoudig onderwerp (1!!)28 October, 22:37
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo