Newsfeed
Oliver
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
12 afbeeldingen
MiG 29 UB LSK „148" (1/72 - Italeri #192)1:72
Project: MiG-29 Fulcrum UB NVA LSK "148"
24 13 February, 12:30
Marc .
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
11 afbeeldingen
Panzer of the lake1:35
2nd layer of resin water. Ready for water gel effects.
Project: Panzer of the lake
52 13 June, 14:20
Alexander Witte
The grass is always greener on the other side of the fence! 😉 I like the Panzer grey though, a nice faded touch, thank you.
The grass is always greener on the other side of the fence! 😉 I like the Panzer grey though, a nice faded touch, thank you.
22 July, 08:08
Marc .
Thanks gary for your idea to use buff. I can see a difference but it's barely noticeable in the photos.
Maybe I should use more buff but I'll wait and see what the whole scene looks like with resin water and water lilies.
Thanks Dietmar.
Thanks Alexander.
Thanks gary for your idea to use buff. I can see a difference but it's barely noticeable in the photos.
Maybe I should use more buff but I'll wait and see what the whole scene looks like with resin water and water lilies.
Thanks Dietmar.
Thanks Alexander.
23 July, 17:27
Marc .
Thanks Rui.
Thank you Robert.
Dear Mspi101 finish the models that you have before buying new ones ...
- The Panzer of the lake has spoken😉
Thanks Rui.
Thank you Robert.
Dear Mspi101 finish the models that you have before buying new ones ...
- The Panzer of the lake has spoken😉
26 July, 18:01
Moritz
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
39 7 July, 16:05
Mr James
Splendid detail on the G.I.'s👌
Also great weathering touches, like the grease on the transmission, the fuel spills and subtle wear and tear on the hull.
Splendid detail on the G.I.'s👌
Also great weathering touches, like the grease on the transmission, the fuel spills and subtle wear and tear on the hull.
8 August, 06:41
Nik Watson
Absolutely superb, the detail and work that you've out in is a real credit to you 👏👏
Absolutely superb, the detail and work that you've out in is a real credit to you 👏👏
8 August, 06:50
BAT21
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
86 18 April, 17:24
Robert Podkoński
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
I have uploaded a few photos of Polish Mi-6 before and after restoration here:
Once there was a collection | Album by podkon ; and here:
Polish Air Force Museum - Dęblin | Album by podkon. Perhaps you will find them useful.
23 April, 19:04
Alexander Grivonev
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
Habe den Kit seit Jahren im Besitz, traue mich aber nicht ran. Was für ein Monster👍
24 May, 17:06
BAT21
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
Wer bei der Tu 128 von Trumpeter alle Fehler in Perfektion beseitigt hat, muss sich nicht vor der Mi-6 fürchten.
Etwas Spachtelmasse und Schleifpapier bereitlegen... und schon kann es losgehen 😉
24 May, 18:54
Alexander Grivonev
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
Ja das war wirklich eine Baustelle das Ding. Aber trotz des Ehrgeizes der Chinesen, dem Modellbauer auch den letzten Nerv zu rauben, sieht mir Amodel so auf den ersten Blick nach mehr Arbeit aus...
24 May, 21:21
Michael Kohl
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
Starts to look like a Mil Mi-6? Well, then it's time to charge the teaser to a picture of your model. 😉
2 June, 19:37
Juergen Klinglhuber
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
Joining in late, but sure worth it. Clean built on this "filling the gaps" giant. 👍
15 June, 14:45
Treehugger
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
Q: The tiny "brass" colored tubes for the wiring on the main rotor head, are those bits of cut up syringe tips?
15 June, 16:42
CaptGPF
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
That rotor work is sick!
…but so is the PE cockpit work at this scale! Watching!
22 June, 17:03
BAT21
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
Thank you mates.
The self-cut masks on the side windows revealed a catastrophic picture after removal: something sticky remained on the windows... the hoped-for cover was also rather poor, the paint got under the masks at the edges. 🤬
Now I'll make a calming coffee and then try to repair it.
8 August, 08:42
Alec K
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
Damn, that sucks. I had same experience on several builds, nothing some scraping and reapplication of Future can't fix.
8 August, 13:08
Thomas Kolb
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
That's unfortunate, but maybe you can remove the tape residue with some IPA alcohol and cotton buds?
8 August, 13:25
BAT21
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
I scraped everything off with a toothpick, more or less. Not the best result, but the model was able to avoid being thrown away.
8 August, 14:37
Spanjaard
seems you recovered pretty well from the problem, congratulations great result
seems you recovered pretty well from the problem, congratulations great result
8 August, 16:41
Erik Leijdens
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
88 afbeeldingen
Grumman TBM3W Avenger MLD (Dutch fleet air arm)Nieuw: 8 August, 20:40 1:48
Project: Grumman TBM3W Avenger
78 17 September 2022, 09:47
Erik Leijdens
A model I always wanted to make! The pregnant Avenger in service of the Dutch fleet air arm, from the time we had a aircraft carrier.
The MLD received 34 Avengers TBM-3S2 and 24 pieces TBM-3W2 from 1954 and later from 1958 from the British Fleet Air Arm 20 second-hand coffins TMB-3E/TMB-3E2.
The S- and W-types were the first to be delivered and formed the core of the anti-submarine warfare force and a large number were stationed aboard the Hr.Ms. Karel Doorman.
Will use a conversion from MDC models for the Accurate Miniatures TMB3, will be a time consuming project I think..
Started cutting up the fuselage, fit of the resin parts is not really great.
A model I always wanted to make! The pregnant Avenger in service of the Dutch fleet air arm, from the time we had a aircraft carrier.
The MLD received 34 Avengers TBM-3S2 and 24 pieces TBM-3W2 from 1954 and later from 1958 from the British Fleet Air Arm 20 second-hand coffins TMB-3E/TMB-3E2.
The S- and W-types were the first to be delivered and formed the core of the anti-submarine warfare force and a large number were stationed aboard the Hr.Ms. Karel Doorman.
Will use a conversion from MDC models for the Accurate Miniatures TMB3, will be a time consuming project I think..
Started cutting up the fuselage, fit of the resin parts is not really great.
17 September 2022, 09:50
Erik Leijdens
Thanks and welcome mates. I just hope this conversion is not a step too far for me, we'll see I guess. Have already coated the cockpit with bronze green FS34151. It makes it easy that this type of Avenger only has a "half" interior! Also, the windows differ on this type, the circled windows need to be puttied shut. A more complicated task will be to enlarge the door, the MDC conversion supplies a new door with window but it has the same size as the kit door which is to small for the Dutch TBM3W.
Thanks and welcome mates. I just hope this conversion is not a step too far for me, we'll see I guess. Have already coated the cockpit with bronze green FS34151. It makes it easy that this type of Avenger only has a "half" interior! Also, the windows differ on this type, the circled windows need to be puttied shut. A more complicated task will be to enlarge the door, the MDC conversion supplies a new door with window but it has the same size as the kit door which is to small for the Dutch TBM3W.
18 September 2022, 10:22
Jan Peters
"fit isn't great" , that's quite an understatement 😄
Following for sure 👀
"fit isn't great" , that's quite an understatement 😄
Following for sure 👀
18 September 2022, 10:26
Erik Leijdens
Welcome Jan and Jasper 😃
Finished the pit, the AM Avenger has impressive internal details, only need the front part for this version though.
Welcome Jan and Jasper 😃
Finished the pit, the AM Avenger has impressive internal details, only need the front part for this version though.
28 September 2022, 21:37
Nathan Dempsey
Wow, that's an interesting subject & I love a conversion project. Your interior is already nice!
Wow, that's an interesting subject & I love a conversion project. Your interior is already nice!
28 September 2022, 23:09
Jan Peters
Very nice cockpit from the box👍🏻
What's next? Loads of filling and sanding?
Very nice cockpit from the box👍🏻
What's next? Loads of filling and sanding?
29 September 2022, 14:27
Erik Leijdens
Well, yes Jan. After the fuselage is closed the real work begins.. Wish me luck! Hopefully it doesn't end in the bin
Well, yes Jan. After the fuselage is closed the real work begins.. Wish me luck! Hopefully it doesn't end in the bin
29 September 2022, 14:28
Erik Leijdens
Almost forgot: before I close the fuselage the door on the starboard side has to be enlarged.
Almost forgot: before I close the fuselage the door on the starboard side has to be enlarged.
29 September 2022, 18:53
Erik Leijdens
Change of plans. Will build this one with the door closed so there was no need to make the hole bigger. Unfortunately I had already done that. Closed the hole again and then puttied and re-scribed the bigger door. Also puttied the windows on the starboard side. Fuselage is now closed so the real work can begin.
Change of plans. Will build this one with the door closed so there was no need to make the hole bigger. Unfortunately I had already done that. Closed the hole again and then puttied and re-scribed the bigger door. Also puttied the windows on the starboard side. Fuselage is now closed so the real work can begin.
2 October 2022, 16:28
Erik Leijdens
The resin part for the turtle back fairing does needs quite a bit filler..!
The resin part for the turtle back fairing does needs quite a bit filler..!
3 October 2022, 19:25
Jan Peters
You've got your work cut out Erik, good luck on re-shaping and sanding 🤞
You've got your work cut out Erik, good luck on re-shaping and sanding 🤞
4 October 2022, 03:23
Erik Leijdens
Thanks mates. Finished the sanding and started rescribing the fuselage.
Thanks mates. Finished the sanding and started rescribing the fuselage.
7 October 2022, 20:15
Jos Jansen
Off course I am in Erik, not behind my bench but from the Eastern front 😉!
Off course I am in Erik, not behind my bench but from the Eastern front 😉!
7 October 2022, 20:34
Erik Leijdens
Thanks Jan! Mated the radar under the fuselage, not a tight fit but quite easy to blend witn the fuselage I think. The new part for the underside of the fuselage is a different story, will need a lot of elbow grease and filler. Have some new stuff to work with; Apoxie clay. Will see ow that works out.
Thanks Jan! Mated the radar under the fuselage, not a tight fit but quite easy to blend witn the fuselage I think. The new part for the underside of the fuselage is a different story, will need a lot of elbow grease and filler. Have some new stuff to work with; Apoxie clay. Will see ow that works out.
9 October 2022, 14:35
Ben M
It's such a fat little bird. I'm enjoying watching you get all the parts fitted together - it looks like quite the challenge
It's such a fat little bird. I'm enjoying watching you get all the parts fitted together - it looks like quite the challenge
9 October 2022, 14:41
Erik Leijdens
Welcome ben 🙂. Started blending the new part for the fuselage, quite a work!
Welcome ben 🙂. Started blending the new part for the fuselage, quite a work!
13 October 2022, 18:56
Andy Ball
My word,…some plastic surgery going on there…results speak for themselves!!
My word,…some plastic surgery going on there…results speak for themselves!!
14 October 2022, 06:56
Erik Leijdens
Thanks mates, I work with Tamiya grey putty and Apoxie clay. Stil nog satisfied though, de radar also needs more attention. So for peace of mind purposes I dry fitted the wings etc to get an idea of the complete aircraft, quite a biggie'!
Thanks mates, I work with Tamiya grey putty and Apoxie clay. Stil nog satisfied though, de radar also needs more attention. So for peace of mind purposes I dry fitted the wings etc to get an idea of the complete aircraft, quite a biggie'!
15 October 2022, 09:50
Jan Peters
A monster job Erik!
I almost forgot how big these aircraft are, even in 72nd scale they are large, let alone in 48th.
A monster job Erik!
I almost forgot how big these aircraft are, even in 72nd scale they are large, let alone in 48th.
15 October 2022, 10:07
Erik Leijdens
Apparently TBM Avengers have propellers with wider blades, so adjusted the kit TBF prop with blades from a Eduard Hellcat kit.
Apparently TBM Avengers have propellers with wider blades, so adjusted the kit TBF prop with blades from a Eduard Hellcat kit.
21 October 2022, 21:41
Erik Leijdens
Made some rivets on the wings, didn't have a good drawing so shamelessly copied from Sid de Koning's wonderful Avenger model 🙂
Made some rivets on the wings, didn't have a good drawing so shamelessly copied from Sid de Koning's wonderful Avenger model 🙂
3 November 2022, 19:22
Björn Svedberg
That is some impressive work already. Love the modifications! 👍 I'll grab a chair and watch 🙂
That is some impressive work already. Love the modifications! 👍 I'll grab a chair and watch 🙂
5 November 2022, 07:35
Erik Leijdens
Thanks Bjorn!!! It is the biggest conversion of a model I have ever attempted. So far it is not disappointing I must say. Must be careful tough to not to set the bar too high and get demotivated when something doesn't work out as hoped.
Meanwhile, I started some re-scribing work around the radar hump. Unfortunately, the Apoxy and Tamiya putty crumbled a bit here and there. All in all, I'm not done with the "Warner" soon 🙂
Thanks Bjorn!!! It is the biggest conversion of a model I have ever attempted. So far it is not disappointing I must say. Must be careful tough to not to set the bar too high and get demotivated when something doesn't work out as hoped.
Meanwhile, I started some re-scribing work around the radar hump. Unfortunately, the Apoxy and Tamiya putty crumbled a bit here and there. All in all, I'm not done with the "Warner" soon 🙂
6 November 2022, 13:25
Hanno Kleinecke
What an undertaking ! Watching with great interest how this Avenger changes its appearance
What an undertaking ! Watching with great interest how this Avenger changes its appearance
6 November 2022, 16:27
Erik Leijdens
The engine is ready! Now I can add the engine to the fuselage and close the parts of the cowling.
The engine is ready! Now I can add the engine to the fuselage and close the parts of the cowling.
12 December 2022, 15:09
Erik Leijdens
Me too Nathan! The nice thing of the AM Avenger is that the fit of the wings is very good. You just click them against the fuselage. So will paint them separately.
Me too Nathan! The nice thing of the AM Avenger is that the fit of the wings is very good. You just click them against the fuselage. So will paint them separately.
23 December 2022, 10:59
Erik Leijdens
This one is still alive too, although it's giving me a headache sometimes. After each coat of primer to check for anomalies around the resin bits new ones still pop up. Also I added rivets on the fuselage which was time consuming. Luckily the time for primer is imminent 🙂
This one is still alive too, although it's giving me a headache sometimes. After each coat of primer to check for anomalies around the resin bits new ones still pop up. Also I added rivets on the fuselage which was time consuming. Luckily the time for primer is imminent 🙂
15 March 2023, 21:34
Erik Leijdens
Thanks mates, will have to scratch a couple of inlets(?) that will go on the portside of the new "canopy". Almost forgot them!
[img1]
Thanks mates, will have to scratch a couple of inlets(?) that will go on the portside of the new "canopy". Almost forgot them!
[img1]
22 March 2023, 13:18
Bernhard Schrock
Eric, I'm impressed by you project. Such a conversion is not off the shelf, but very special. I'm curios to see the next steps especially painting and decaling. Btw your project inspired me to reactivate my dusty Avenger project. Originally I intended to build a TBM-3S in US Navy markings. But I decided now to build a Royal Dutch Navy machine in grey and sky. Do you maybe have any ideas where I might get fitting decals?
Eric, I'm impressed by you project. Such a conversion is not off the shelf, but very special. I'm curios to see the next steps especially painting and decaling. Btw your project inspired me to reactivate my dusty Avenger project. Originally I intended to build a TBM-3S in US Navy markings. But I decided now to build a Royal Dutch Navy machine in grey and sky. Do you maybe have any ideas where I might get fitting decals?
30 March 2023, 18:32
Erik Leijdens
Thanks for the nice words Bernhard! It is indeed quite a tricky conversion but slowly but surely there is progression in it. Your project is already very impressive, that engine really is a gem, wow! And the detail you added to the tailplane is really complementary. A very good choice to make your model also of the Dutch navy! Dutch Decal has released 2 sets that have the -3S on them, the one I also use for my -3W but it's about 15 years old, there's also a newer one that also has some on it for the -3S. I have both sets, will see if I can spare some.
Thanks for the nice words Bernhard! It is indeed quite a tricky conversion but slowly but surely there is progression in it. Your project is already very impressive, that engine really is a gem, wow! And the detail you added to the tailplane is really complementary. A very good choice to make your model also of the Dutch navy! Dutch Decal has released 2 sets that have the -3S on them, the one I also use for my -3W but it's about 15 years old, there's also a newer one that also has some on it for the -3S. I have both sets, will see if I can spare some.
30 March 2023, 19:45
Alec K
I have been peeking at this project already, time to officially take a seat. Magnificent progress Erik 👍
I have been peeking at this project already, time to officially take a seat. Magnificent progress Erik 👍
31 March 2023, 11:43
Erik Leijdens
Thanks Alec! Hope to show some new progress soon. Still thinking of a way to recreate the small inlets.
Thanks Alec! Hope to show some new progress soon. Still thinking of a way to recreate the small inlets.
31 March 2023, 20:52
Erik Leijdens
It took a while but finally I've started painting the Warner Avenger.. Sprayed the wings and fuselage with Sky and the top of wings with Extra Dark Sea grey. Unfortunately, I forgot adding some details to the fuselage due to the fact that when a project is left aside for a while I forget things which were on the "to do" list.. Happy with the result of the rivets under a layer of paint though.
It took a while but finally I've started painting the Warner Avenger.. Sprayed the wings and fuselage with Sky and the top of wings with Extra Dark Sea grey. Unfortunately, I forgot adding some details to the fuselage due to the fact that when a project is left aside for a while I forget things which were on the "to do" list.. Happy with the result of the rivets under a layer of paint though.
11 March, 21:14
Erik Leijdens
Welcome mates!! I hope the chair will be there for a while now Jos!
Dry fitted the wings tonight, perfect fit. Threaded them with a gloss coat for de decals.
Welcome mates!! I hope the chair will be there for a while now Jos!
Dry fitted the wings tonight, perfect fit. Threaded them with a gloss coat for de decals.
13 March, 21:41
Erik Leijdens
Added a gloss coat and decals, the Dutch Profile decals are quite old (2008) and not very responsive to Mircrosol but they look gooood. And the only ones on the market for a Dutch Warner Aveneger I believe.
Added a gloss coat and decals, the Dutch Profile decals are quite old (2008) and not very responsive to Mircrosol but they look gooood. And the only ones on the market for a Dutch Warner Aveneger I believe.
5 April, 18:12
Erik Leijdens
Hi John oh yes and I also have the Strong version from Daco but sometimes they are just too aggresive..
Hi John oh yes and I also have the Strong version from Daco but sometimes they are just too aggresive..
5 April, 18:14
John
Definitely have to be careful with that stuff. I had Solvaset chew through an X-22 clear coat like it was the blood from Aliens.
Definitely have to be careful with that stuff. I had Solvaset chew through an X-22 clear coat like it was the blood from Aliens.
5 April, 18:15
Ben M
I always let tamiya gloss dry for a week or so before I do stuff like micro-sol. So far that has worked for me.
I always let tamiya gloss dry for a week or so before I do stuff like micro-sol. So far that has worked for me.
5 April, 23:29
Bernhard Schrock
I'm very glad to see the progress and looking for the completed model. 🙂Decals & markings looks very good.
I'm very glad to see the progress and looking for the completed model. 🙂Decals & markings looks very good.
6 April, 05:44
Erik Leijdens
Off course after all the paint work I discovered the Warner Avengers have two handgrips on each side of the fuselage. The kit only has 1 molded, so some work is required!
Off course after all the paint work I discovered the Warner Avengers have two handgrips on each side of the fuselage. The kit only has 1 molded, so some work is required!
24 April, 07:08
Erik Leijdens
So, after some time of not doing anything to the hobby I can finally show an update on the Warner. This one is really nearing the finish line now thankfully. The last few days I applied a light gray wash + a satin coat over it. The MLD Avengers were high gloss but in 1/48 satin seems better to me. Also removed the masks from the canopy and the undercarriage is placed, also added some zebra stripes to the tailhook. I have not yet decided whether to glue the wings on or keep them removable, they do snap on nicely so I am leaning towards the latter. Also the turtle back handles and steps still need to be put on and of course an antenna wire. And also the window in the roundel still needs "glass".
So, after some time of not doing anything to the hobby I can finally show an update on the Warner. This one is really nearing the finish line now thankfully. The last few days I applied a light gray wash + a satin coat over it. The MLD Avengers were high gloss but in 1/48 satin seems better to me. Also removed the masks from the canopy and the undercarriage is placed, also added some zebra stripes to the tailhook. I have not yet decided whether to glue the wings on or keep them removable, they do snap on nicely so I am leaning towards the latter. Also the turtle back handles and steps still need to be put on and of course an antenna wire. And also the window in the roundel still needs "glass".
8 August, 20:40
Hans
I say! Your cat does a nice job sanding and re-scribing. I love anything MLD. Wonderful job.
I say! Your cat does a nice job sanding and re-scribing. I love anything MLD. Wonderful job.
8 August, 21:07
scaleffect
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
7 8 August, 16:44
Michael Kohl
Great. Love quality and color and the small bumpers.
Are the rear lights upside down?
Great. Love quality and color and the small bumpers.
Are the rear lights upside down?
8 August, 21:09
scaleffect
Probably, I don't know anything about the real car so followed the instructions blindly. That is an unfortunate and glaring error I will forever be ashamed of. Thank you for pointing it out. I will do better next time 🙁
Probably, I don't know anything about the real car so followed the instructions blindly. That is an unfortunate and glaring error I will forever be ashamed of. Thank you for pointing it out. I will do better next time 🙁
8 August, 21:29
Dan Grant
begon dit item
begon dit item
U.S.Infantry Late WWII/Korean War M1943 Uniform
Andy's Hobby Headquarters 1:16
AHHQ - 005 2023 Nieuwe mallen 8 August, 22:04
Dave Smith
wil dit item
wil dit item
M1A1 ABRAMS TANK Ukraine Update Version with Workable Tracks
Rye Field Model (RFM) 1:35
RM-5120 (RM5120) 2024* Nieuwe onderdelen 8 August, 22:02
Dave Smith
is eigenaar van dit item
is eigenaar van dit item
M1A1 ABRAMS TANK Ukraine Update Version with Workable Tracks
Rye Field Model (RFM) 1:35
RM-5120 (RM5120) 2024* Nieuwe onderdelen 8 August, 22:02
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo