Newsfeed
Rainer
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
13 afbeeldingen
P-51 Mustang D-Day AnniversaryNieuw: 27 June, 19:41 1:48
Project: P-51 D-Day Anniversary
6 16 June, 22:42
Glenn
A little update to anyone that has an interest in the UFO/UAP subject! First of all if you don't care then don't look! But if you are interested then you may like to check out the story that broke on social media the other day relating to a photo of an alleged UFO crash that was shown by no other than Ron James... Head of MUFON (Mutual UFO Network) one of the largest civil investigator groups that's been around for a very long time.
He held up a black and white photo of a UFO crash and within the first few hours a few of us model builders were jumping online to say that the figures seen in the photo where nothing but Tamiya 1/35 figures posed with a very crude diorama of a car hubcap! This blew up pretty quickly and several modellers jumped on saying the same thing!
Anyway here's a link to the follow up podcast with John Greenewald from the Black Vault. Scalemates got a bit of a plug with the photo of the kit shown watermarked from Scalemates! This may be because i also mentioned Scalemates on another page as a reference for the model kit information! So there you go Tim we managed to get Scalemates mentioned in the process of debunking the photo!
Link> Youtube Video
He held up a black and white photo of a UFO crash and within the first few hours a few of us model builders were jumping online to say that the figures seen in the photo where nothing but Tamiya 1/35 figures posed with a very crude diorama of a car hubcap! This blew up pretty quickly and several modellers jumped on saying the same thing!
Anyway here's a link to the follow up podcast with John Greenewald from the Black Vault. Scalemates got a bit of a plug with the photo of the kit shown watermarked from Scalemates! This may be because i also mentioned Scalemates on another page as a reference for the model kit information! So there you go Tim we managed to get Scalemates mentioned in the process of debunking the photo!
Link> Youtube Video
27 June, 19:39
MS K
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
20 13 June, 16:23
Bill Newcomer
I had some adventures in a microbus with some of my cousins back in the early 70's
I had some adventures in a microbus with some of my cousins back in the early 70's
27 June, 00:20
Robert Podkoński
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
9 afbeeldingen
Homebuilt X-planeNieuw: 27 June, 08:03 1:48
Finished. Main rotor is made from soft, vinyl-like material, what causes it to sag...
Project: Homebuilt X-plane
30 18 June, 13:56
Robert Podkoński
Welcome, Mates! Thanks for the tip, John. Yet, I am too afraid to use it on such a delicate and intricate contraption...
Welcome, Mates! Thanks for the tip, John. Yet, I am too afraid to use it on such a delicate and intricate contraption...
18 June, 17:28
bughunter
That is a very filigree affair 😮 But are such heavy print line needed with latest technology? 🤔 I do not have a 3D printer but I have seen better parts.
That is a very filigree affair 😮 But are such heavy print line needed with latest technology? 🤔 I do not have a 3D printer but I have seen better parts.
18 June, 17:48
Ben M
I dilute perfect plastic putty and brush on parts with print lines. It dries in the "valleys" and runs off the "peaks" if you orient the part correctly. No need for a lot of sanding.
I dilute perfect plastic putty and brush on parts with print lines. It dries in the "valleys" and runs off the "peaks" if you orient the part correctly. No need for a lot of sanding.
18 June, 18:00
John Hughes
Robert, I would brush on a thin coat of Mr Surfacer and use Levelling Thinner with a cotton bud to cut it back. You don't need to apply any pressure.
Robert, I would brush on a thin coat of Mr Surfacer and use Levelling Thinner with a cotton bud to cut it back. You don't need to apply any pressure.
18 June, 18:51
Robert Podkoński
Thanks again for your tips, Ben and John, much appreciated 🙂 It is a pity that I already painted it and a few details... I hope that from the distance no one will notice these lines 😉
Thanks again for your tips, Ben and John, much appreciated 🙂 It is a pity that I already painted it and a few details... I hope that from the distance no one will notice these lines 😉
18 June, 19:55
John Hughes
You have an easy job doing on a kit this size, Robert. I've got a 3D printed 760mm tall Thunderbird 1 to do some day!
You have an easy job doing on a kit this size, Robert. I've got a 3D printed 760mm tall Thunderbird 1 to do some day!
18 June, 19:59
John Hughes
I have an album of the main parts assembled. You can see there will be a lot of smoothing of the surface required.
I have an album of the main parts assembled. You can see there will be a lot of smoothing of the surface required.
18 June, 21:41
Ben M
I did a resin printed 1/35 K-Wagen, not quite as big as the thunderbird I think, but one of the biggest models I have built. There was a lot of putty and sanding involved.
I did a resin printed 1/35 K-Wagen, not quite as big as the thunderbird I think, but one of the biggest models I have built. There was a lot of putty and sanding involved.
19 June, 01:23
Robert Podkoński
@John - smoothig the surface will be the big task indeed in the case of this Thunderbird...
@John - smoothig the surface will be the big task indeed in the case of this Thunderbird...
19 June, 05:56
gorby
I doubt if the print lines will be noticeable on such a tiny model (damn you macro! 😄 ).
I doubt if the print lines will be noticeable on such a tiny model (damn you macro! 😄 ).
19 June, 08:01
Ludvík Kružík
Robert, did you get the scale wrong? 😄 For 1/48 scale, those flying tubes are really tiny.
I wish you a steady hand and a lot of patience during the construction and I'm curious to see the result.
Robert, did you get the scale wrong? 😄 For 1/48 scale, those flying tubes are really tiny.
I wish you a steady hand and a lot of patience during the construction and I'm curious to see the result.
19 June, 10:27
Robert Podkoński
It is great to have you on board, Ludviku 🙂 On the box it is written 1/48th scale, so I believe to the producer... There is also a 1/72nd scale kit available...
It is great to have you on board, Ludviku 🙂 On the box it is written 1/48th scale, so I believe to the producer... There is also a 1/72nd scale kit available...
19 June, 13:10
Ludvík Kružík
Robert, I can't miss such an interesting fact.
With my eyes, I would need a microscope to build this 1/72nd scale model. 😄
Robert, I can't miss such an interesting fact.
With my eyes, I would need a microscope to build this 1/72nd scale model. 😄
19 June, 18:36
Robert Podkoński
I announce the next X-plane in my collection finished. Perhaps the most exotic one in the series...
I announce the next X-plane in my collection finished. Perhaps the most exotic one in the series...
27 June, 08:07
Michael Kohl
Nice. Is it a gyrocopter? Looks a bit like an american adaptation of the Bachstelze.
Nice. Is it a gyrocopter? Looks a bit like an american adaptation of the Bachstelze.
27 June, 11:21
Robert Podkoński
Yes, Michael, it is a gyrocopter. For more info you can take a look here:
nationalmuseum.af.mi..en-x-25a-gyrocopter/
(FYI, many years ago I have build both versions of the X-24 😄 😄 😄 )
Yes, Michael, it is a gyrocopter. For more info you can take a look here:
nationalmuseum.af.mi..en-x-25a-gyrocopter/
(FYI, many years ago I have build both versions of the X-24 😄 😄 😄 )
27 June, 11:57
John Hughes
Would adding a pilot be enough weight to stop it being a tail-sitter, I wonder?
Would adding a pilot be enough weight to stop it being a tail-sitter, I wonder?
27 June, 13:58
Robert Podkoński
Presumably, it worked this way, John:
military-history.fandom.com/wiki/Bensen_B-8
Presumably, it worked this way, John:
military-history.fandom.com/wiki/Bensen_B-8
27 June, 14:14
Nicolas
Very nice result Robert. Dont worry about it being a tail sitter, the original is without pilot a tailsitter too.
👍👍
Very nice result Robert. Dont worry about it being a tail sitter, the original is without pilot a tailsitter too.
👍👍
27 June, 18:10
Alex K
Well, I'm a little disappointed that you didn't go for the 1:72 kit... but... OK... 😛 Seriously, beautiful job on a very special X-plane... 👍 👍
Well, I'm a little disappointed that you didn't go for the 1:72 kit... but... OK... 😛 Seriously, beautiful job on a very special X-plane... 👍 👍
27 June, 18:36
Robert Podkoński
Thank you very much for your kind words, Mates. Much appreciated 🙂
@ Alex: I've bought a 1:48 kit simply because it was not available in 1;72 scale... 😉
Thank you very much for your kind words, Mates. Much appreciated 🙂
@ Alex: I've bought a 1:48 kit simply because it was not available in 1;72 scale... 😉
27 June, 19:22
Alex K
Well... since you built a Pou du Ciel in 1:144, the 1:72 Bensen wouldn't be a problem for you... and it would have been great along these: One-man helicopters | Album by podkon (1:72)
So... what's next - a scratch-built Paresev maybe??? en.wikipedia.org/wiki/NASA_Paresev 😉
Keep them coming! 👍
Well... since you built a Pou du Ciel in 1:144, the 1:72 Bensen wouldn't be a problem for you... and it would have been great along these: One-man helicopters | Album by podkon (1:72)
So... what's next - a scratch-built Paresev maybe??? en.wikipedia.org/wiki/NASA_Paresev 😉
Keep them coming! 👍
27 June, 19:39
Jean-Louis Durand
wil dit item
wil dit item
RAF Flying Nightingales with Wounded (WW2) RAF Through The Ages: World War 2
Modelu 1:35
50321-035 2024 Nieuwe mallen 27 June, 19:39
Starbase101@SCM Data suggestions
I don't know who or why USS Arizona (Revell 85-0302, 1:426) was set at 1:429 scale, but it says right on the box 1:426 and all the after-market products for this kit are 1:426 so I changed the scale back to 1:426 for the kit.
27 June, 19:32
AngryJazz
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
55 25 June, 18:45
Neuling
Great. Excellent work on the bricks and cobble stones and the figure. A well balanced lay out. Modelling at its best.
Great. Excellent work on the bricks and cobble stones and the figure. A well balanced lay out. Modelling at its best.
26 June, 07:00
Marius
Impressive result! I especially like the weathering on the car sides and wheels.
Impressive result! I especially like the weathering on the car sides and wheels.
26 June, 11:25
Michael Kohl
Very well done build, paint job, weathering, figure painting and diorama. I only would have expected the engine compartment to be more dirty and grimy. Everything else is just spot on.
Very well done build, paint job, weathering, figure painting and diorama. I only would have expected the engine compartment to be more dirty and grimy. Everything else is just spot on.
26 June, 15:13
AngryJazz
Again thank you very much! 🙂
I agree with you Michael - I could have grimed it up a bit more. Did not think it was that visible in the end... I did add wires for the spark plugs though so don't know I skipped more dirt... 😂
Again thank you very much! 🙂
I agree with you Michael - I could have grimed it up a bit more. Did not think it was that visible in the end... I did add wires for the spark plugs though so don't know I skipped more dirt... 😂
27 June, 19:05
Dom SAVE
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
30 5 May, 15:25
John
Looking really good. I can tell its going to be a lot better than mine, which is turning into a slog, so I'm not giving it 100%.
Looking really good. I can tell its going to be a lot better than mine, which is turning into a slog, so I'm not giving it 100%.
17 June, 23:34
Dom SAVE
@John, Thank you very much, I still have plenty of time to mess things up! 🙂 I looked at yours and you came out superbly, maybe it's worth putting it aside while waiting for the taste to come back? I have a bit of the same feeling at the end of assembly. The 2006 kit was not easy to line up.
@John, Thank you very much, I still have plenty of time to mess things up! 🙂 I looked at yours and you came out superbly, maybe it's worth putting it aside while waiting for the taste to come back? I have a bit of the same feeling at the end of assembly. The 2006 kit was not easy to line up.
18 June, 17:38
John
Dom, thanks. However, I am so far in that I am determined to finish it. I have a bad habit of never coming back to a "paused" build, so onward it is!
Dom, thanks. However, I am so far in that I am determined to finish it. I have a bad habit of never coming back to a "paused" build, so onward it is!
19 June, 20:37
Jess Lewis
is eigenaar van dit item
is eigenaar van dit item
Air Refueling KA-6D VA-35 Black Panthers & F-14A VF-74 Be-Devilers
Dragon 1:144
4595 (4595-03) 2009 Nieuwe markeringen Meervoudig onderwerp (2)27 June, 19:22
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo