Newsfeed
Tony Leung
is eigenaar van dit item
is eigenaar van dit item
F/A-18F Super Hornet [U.S. Navy Carrier-Borne Fighter/Attacker]
Hasegawa 1:72
00548 (E18) 2003 Nieuwe mallen 12 October, 02:50
Brandon H
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
8 27 September, 15:38
Brandon H
A little behind in getting the photos posted, but please enjoy these superb scale builds from the 2024 Richard Crane Truck Show in St. Ignace, MI!
A little behind in getting the photos posted, but please enjoy these superb scale builds from the 2024 Richard Crane Truck Show in St. Ignace, MI!
27 September, 18:54
István Szücs
Thank you for sharing these pictures! Good to see your Comanche hits the road!
Thank you for sharing these pictures! Good to see your Comanche hits the road!
3 October, 16:30
Soeren R.
markeerde dit item als in bestelling
markeerde dit item als in bestelling
AIM-9J Sidewinder missiles (4 шт.) (F-4, F-5, F-16, F-15, F-14, Mirage F.1, Harrier, Mirage III, Hawk) (3D Printed)
ResKit 1:48
RS48-0480 2024 Nieuwe mallen 12 October, 02:49
Tony Leung
is eigenaar van dit item
is eigenaar van dit item
Modern
Russian Soldier in Firing Pose for Heavy Machine Guns Live Resin 1:35
LRM-35108 2023 Nieuwe mallen 12 October, 02:48
Tony Leung
is eigenaar van dit item
is eigenaar van dit item
Fighter of Alpha Group of the FSB Special Purpose Center - Set 3
Live Resin 1:35
LRM35113 2024 Nieuwe mallen 12 October, 02:48
Tony Leung
is eigenaar van dit item
is eigenaar van dit item
Fighter of Alpha Group of the FSB Special Purpose Center - Set 2
Live Resin 1:35
LRM35112 2024 Nieuwe mallen 12 October, 02:48
Tony Leung
is eigenaar van dit item
is eigenaar van dit item
Fighter of Alpha Group of the FSB Special Purpose Center - Set 1
Live Resin 1:35
LRM35111 2024 Nieuwe mallen 12 October, 02:48
Dominik Weitzer
heeft een nieuw project toegevoegd.
heeft een nieuw project toegevoegd.
6 October, 10:10
Bill Newcomer
I have this kit from way back. I am waiting for my skillset to get better to tackle it.
I have this kit from way back. I am waiting for my skillset to get better to tackle it.
12 October, 02:37
Bozzer
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
6 11 August, 08:01
Bozzer
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
11 August, 08:07
Bozzer
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
2 October, 07:45
Bozzer
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
5 October, 23:24
Martin Oostrom
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
6 October, 07:16
Nigel Chapman
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
6 October, 08:34
Bozzer
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
The original mistake was how I orientated the print. Also, I cured it in my machine. On the second attempt, I cured it slowly by sunlight and started assembly before it was fully cured. That turned out better, because I was able to get a better joint and the Super Glue held it better. Still a little filling, but a much better result. My plan is to light sand everywhere, then apply a filler/primer. I need to source this, but I will.
You boys will appreciate this....
The wife walked into the new cave, and stopped talking!
She's now aware of the stash that I've accumulated, during her absence. She said that I must have spent a lot, on kits?
I told her that they're cheaper than hookers!
When the swelling goes down, from my black eyes, I'll start modelling again!
6 October, 16:24
Mr D
Looking great 👍
What is it made from??
I've never come across a build like this??
Looking great 👍
What is it made from??
I've never come across a build like this??
6 October, 18:44
Nigel Chapman
Taken out of context 'starting modelling again' doesn't sound much better 🤪
Taken out of context 'starting modelling again' doesn't sound much better 🤪
6 October, 22:57
Bozzer
Lol, she was cool with it really.
@Mr D. This is an ABS-like, clear resin and printed on a resin printer. It's the largest resin build, I've done, to date.
Lol, she was cool with it really.
@Mr D. This is an ABS-like, clear resin and printed on a resin printer. It's the largest resin build, I've done, to date.
7 October, 17:10
Mr D
Thanks Bozzer, learned something new.
Looks a fun project, all the best with it 👍👍
Thanks Bozzer, learned something new.
Looks a fun project, all the best with it 👍👍
7 October, 19:06
Bill Newcomer
I have been out of the loop as my summer has been very busy. I shall be very interested how this comes along. I can afford a 3D printer, I simply do not have the space for one.
I have been out of the loop as my summer has been very busy. I shall be very interested how this comes along. I can afford a 3D printer, I simply do not have the space for one.
12 October, 02:34
Brandon H
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
10 7 October, 15:16
István Szücs
She looks good in yellow, I love the way you weather your vehicles! The slant6 also a good idea!
She looks good in yellow, I love the way you weather your vehicles! The slant6 also a good idea!
7 October, 19:08
Alexander Grivonev
I like the subtle weathering, the little paint blemishes, very realistic looking👍 Beautiful!
I like the subtle weathering, the little paint blemishes, very realistic looking👍 Beautiful!
8 October, 12:22
Curtis Caden
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
24 21 September, 16:03
Curtis Caden
Thank you Pepe, Martin Oostrom and Goldman. My only wish is that directions would show pictures of how the part looks after it is attached. Too many arrows pointing in a direction and not even showing which way the part should be flipped. I am convinced that to build a model correctly one should do two of them. One to learn on and one to have for a nice, finished product. I tell myself that I build it because I like the subject matter, and it is only a representation. I felt bad that I couldn't align the white decal stripes better.
Thank you Pepe, Martin Oostrom and Goldman. My only wish is that directions would show pictures of how the part looks after it is attached. Too many arrows pointing in a direction and not even showing which way the part should be flipped. I am convinced that to build a model correctly one should do two of them. One to learn on and one to have for a nice, finished product. I tell myself that I build it because I like the subject matter, and it is only a representation. I felt bad that I couldn't align the white decal stripes better.
22 September, 11:05
David Orr
Very nice work Curtis. Looks like an absolute beast. How did the kit go together? I've got an AMT Kenworth Alaskan Hauler in the stash which I'm hoping to build soon. That will be my first truck model.
Very nice work Curtis. Looks like an absolute beast. How did the kit go together? I've got an AMT Kenworth Alaskan Hauler in the stash which I'm hoping to build soon. That will be my first truck model.
22 September, 23:22
Christian W
That truck looks really nice! Flawless pauntjob. This is what I like 🙂
That truck looks really nice! Flawless pauntjob. This is what I like 🙂
23 September, 09:19
Curtis Caden
David Orr the truck part went together fine. The wrecker part that sits on the frame was a bit awkward. There were two options for the hooking part that led to some confusion on my part. I liked having the long cable but having it molded in plastic was not ideal and I probably should have substituted a fabric rope cable. I did like the way the mirrors in this kit were molded.
David Orr the truck part went together fine. The wrecker part that sits on the frame was a bit awkward. There were two options for the hooking part that led to some confusion on my part. I liked having the long cable but having it molded in plastic was not ideal and I probably should have substituted a fabric rope cable. I did like the way the mirrors in this kit were molded.
23 September, 11:26
Djordje Nikolic
heeft dit item voltooid
heeft dit item voltooid
German 20mm Flakvierling 38 w/4 figures
Tamiya 1:48
32554 2008 Nieuwe mallen Meervoudig onderwerp (2)12 October, 02:24
Djordje Nikolic
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
8 afbeeldingen
M3A3 Stuart Flakvierling - 1/48Nieuw: 12 October, 02:23 1:48
Project: M3A3 Stuart Flakvierling - 1/48
12 October, 02:23
Artorius
is eigenaar van dit item
is eigenaar van dit item
Full Mechanics Gundam Seed MSV
GAT-X133 Sword Calamity Gundam Premium Bandai Limited Bandai Spirits 1:100
5066577 2024 Nieuwe onderdelen 12 October, 02:18
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo