modelbouw databank | stash manager
gorby
gorby
GB

Finnish Racer Finnished…..eeerrr no, I mean Finished

Album image #1
Album image #2
Album image #3
Album image #4
Album image #5
Album image #6
Album image #7
Album image #8
I've added a few photos to show how I did the masking. I use Inkscape to draw the markings I need, then tape that behind a thin bit of clear plastic. To the left is a flat panel SAD light lying flat on my bench. 
 

Album image #9
Use a curved scalpel blade to cut out the masking tape which is stuck on the clear plastic. 
 

Album image #10
Some masks I needed the positive mask and some the negative. 
 

Album image #11
I used my homemade circle cutter to make the roundels. Ignore the attempt on the left - that showed that I needed to replace the blade. It can accurately cut circles just under 2mm diameter. 
 

Album image #12
It was significantly more of a problem to place the mask in the correct place on the model than it was to cut them. 
 

Album image #13
First colour on. 
 

Album image #14
All change...mask on for the second colour. 
 

Album image #15
The result 
 

Opmerkingen

68 18 November 2023, 12:16
Alex K
... seriously?! 😛 👍 👍
18 November 2023, 20:34
Robert Podkoński
Great model and fantastic presentation, Gorby!
18 November 2023, 21:30
gorby
Thanks very much Alex & Robert. 🙂
19 November 2023, 07:51
S M
Wow nicely done! And without decals?! Amazing masking skills!
19 November 2023, 10:11
Moreno Baruffini
Absolutely astonishing!!!
19 November 2023, 10:35
gorby
Thanks S M & Moreno for your nice comments. Yes it was a bit of a masking challenge. Fortunately I'm one of those weirdos who actually likes masking.
19 November 2023, 11:07
Neuling
Beautiful model in cool presentation! And thanks for the link to brexitmodeller.
19 November 2023, 11:25
gorby
Thanks very much Neuling. 👍
Incidentally Brexitmodeller changed its name to All Scale Modeller, unfortunately the links still show the old name. Also, the old name was nothing to do with Britain leaving Europe, it was supposed to be a joke about splitting from Britmodeller, which sort of back-fired.
19 November 2023, 17:44
Guy Rump
Unusual and lovely build. 👍
19 November 2023, 18:03
Łukasz Gliński
Neat build Sir 👍 The 'camo' catches the eye
19 November 2023, 18:48
Spanjaard
fantastic job gorby, excellent mersu
19 November 2023, 19:32
Spanjaard
wait a second.... hand made masking in 1/72?? wow, amazing!!
19 November 2023, 19:42
gorby
Thanks for your comments mates, I'm glad you like it. 🙂

I've added some photos of how I made the masks.
20 November 2023, 09:55
Alec K
An excellent build and even more excellent saga with the retro Spit build. Congratulations on winning the prize btw! I could not stomach burning my build for ANY reason (likely due to the fact that when I did it as a kid in our kitchen and left a greasy black spot on the ceiling, I have received a commensurate reprimand). I like your mask cutting setup, seems very effective 👍
20 November 2023, 14:44
gorby
Thanks Alec. 👍
I had to torch the Spit Alec, it was Starfix so it was asking for it. 😄
20 November 2023, 15:24
Rando
I did similar masking on a 1/72 Lightning! Also loved doing it, very satisfying when it turns out as beautiful as this plane. What a cool design.
20 November 2023, 15:53
gorby
Thanks Rando. 👍
20 November 2023, 16:52
Djordje Nikolic
Me like it! 🙂 Great job!
22 November 2023, 02:49
Neil
Lovely work! Much patience, perseverance and I suspect 1/72 'chequered' eyesight was undertaken to gain such a deserved result.👏👍
6 December 2023, 20:28
Michael Kohl
Love it.
6 December 2023, 23:14
gorby
Thanks very much Djordje, Neil & Michael I'm glad you like it. 🙂
7 December 2023, 11:19
Vincent
Great work on the scheme. Very impressive painting result!!!
7 December 2023, 20:54
Bernd Grün
Very nice build and outstanding paint and mask job! Congrats, mate. 👌👍👌
8 December 2023, 10:57
gorby
Thanks Vincent & Bernd and for the people who have clicked 'like'.
It did make me wonder if it would be possible to do the same in 1/144.
Maybe I should be sectioned for my own good. 😄
8 December 2023, 15:52
Spanjaard
only one way of knowing my dear gorby 😉
8 December 2023, 16:17
gorby
😄 😄 😄
I think I'll wait a while to see if I can get over that particular madness. 😉
8 December 2023, 17:09

Album info

Let me tell you a story, not my usual 14,000 word epic, I've taken pity on you so I'll keep this brief.
I won this kit as a prize, which gave me a tiny problem as I'd recently become allergic to swastikas.…..what to do, what to do… Unusually for me, the answer was to take it seriously.
Looking around for an alternative scheme I found one in Finnish racing colours. It just happened to be the most complicated scheme I found. What a surprise. No decals exist in 1/72 as far as I know and even if there were, I'm too tight to buy them so all the markings are done with home-made, hand-cut masks.
Utti ai base had a mid-summer festival open day on June 23rd 1950. It held an air show, at which participated a total of twelve 109's (Mersus). It ended in an American Reno style air race around poles with four specially marked planes. MT-508 was plane B and at the controls was luutnantti Arvo Arima. I think only one photo exists so details are sketchy. I've included the photo on the base. It's believed that the aircraft had special markings on the left side only – thankfully. It was painful enough doing just one side.
I didn't do any weathering because as a racer it would proba…..who am I trying kid. I didn't do any weathering because I couldn't be arsed.

15 afbeeldingen
1:72
Voltooid
1:72 Messerschmitt Bf109 G-6 (Tamiya 60790)

Alle albums

Bekijk alle albums »