MyAlbum
1
June 10, 2024Cockpit assembly started2
June 10, 2024First grey Vallejo Primer coat.3
June 10, 2024Satin Black, Revell 1:1 dilution with Vallejo airbrush cleaner4
June 11, 2024Cockpit Interior base paint. Was missing the correct paint, so I mixed-down some olive drab. Should suffice.
Cockpit in black gloss varnished ready for decal.5
June 15, 2024Cockpit assembly continues6
June 15, 2024Black wash and dry brush finish…bit overtop with Light Metal MIG 0621…note to self, less is more 🙂7
June 15, 2024Small touch up on head cushion and seat belt8
June 15, 20249
June 15, 2024Very tight fit at the end, has to sand and cut a lot. Cockpit top silver, needs subtle application next time 🙂10
June 16, 2024Fits snuggly11
June 16, 2024Ready for assembly and weathering12
June 16, 2024Many parts to assemble, ready for painting13
June 17, 2024Engine weathering and some more work on wings and aileron done14
June 18, 2024Aftermarket has arrived from Poland ??
15
June 18, 2024Gun barrels16
June 18, 2024Nice quality17
June 18, 2024Wings almost done with aftermarket guns and tried out clear colour18
June 18, 20243-4 hours laters, wings done, engine assembled, forgot cowling to paint….19
June 20, 2024Assembled the plane halves
Adding generously acrylic putty20
June 20, 202421
June 20, 202422
June 20, 2024Mistakes had been made. Need to cure PU varnish longer next time during engine part detailing23
June 20, 2024Wheel struts broke off of course as well as the antenna and also the wing struts…24
June 23, 2024Masked top part, brush painted USAF olive drab 1:1 plus Anmo satin mat, also rotor blades done as well as some other parts25
June 24, 202426
June 24, 2024Some detailing done today27
June 26, 202428
June 26, 2024Some small parts done29
June 26, 2024Gunmetal spray with some touch ups30
June 28, 2024Started with the left side, new to decaling and not my strength to be honest.
Made some mistakes and the Torrid Tessie broke….31
June 28, 2024Getting better on the second day, need to make sure to use the ammo decal set twice and dry it, then only use a little for the decal fix at the end, otherwise it will peel the decal.no.3 broke unfortunately
Trying to get a new set to correct both issues now 🙂32
June 29, 2024My first airbrush set arrived, Harder & Steenbeck ULTRA 2024 wit a 0.45mm needle kit.
Love it and applying two varnish coats after decaling now33
June 30, 20241st weathering pass, for panel lines and rivets.34
June 30, 20241st pass weathering35
June 30, 20241st pass weathering36
June 30, 20241st pass weathering37
June 30, 2024Undercarriege
Opmerkingen
14 10 June, 04:40