Tomahawk progress

1
July 23, 2018
Cockpit finished 🙂, but no seat belts yet..
2
July 23, 2018
3
July 23, 2018
4
July 23, 2018
5
July 31, 2018
Riveting done!
6
July 31, 2018
Preshading and painting of all the small parts finished. Colors in the background will be used for the camo.
7
July 31, 2018
All prepared for the second camo color. I changed my mind for the dark brown I will use RAF brown instead of XF-68.
8
July 31, 2018
Camo finished! Colors look darker in the picture than they do in reality. The white balance on my phone camera isn't the best.
9
July 31, 2018
10
August 1, 2018
I seem to have misaligned the sharkmouth. Time to fix..
11
August 1, 2018
First a bit of red sprayed in the air intake.
12
August 1, 2018
Next, masking and spraying the black.
13
August 1, 2018
A couple of shark teeth was painted using the air intake channels. Also added some white paint where it was needed elsewhere.
14
August 1, 2018
Lastly, a coat of clear gloss to seal it in.
15
August 1, 2018
Everything is finished and awaiting the weathering step.
16
August 2, 2018
Tomahawk is finished.
17
August 2, 2018
18
August 2, 2018
19
August 2, 2018
20
August 2, 2018
21
August 2, 2018
22
August 2, 2018
23
August 2, 2018
24
August 2, 2018
25
August 2, 2018
26
August 2, 2018
27
August 2, 2018
28
August 2, 2018
29
August 2, 2018
30
August 2, 2018
31
August 2, 2018
32
August 2, 2018
33
August 2, 2018
34
August 2, 2018
Mirror is a piece of aluminium foil.
35
August 2, 2018
36
August 2, 2018
37
August 2, 2018
38
August 2, 2018
39
August 2, 2018
RAF 112 Squadron meetup 😉
40
August 2, 2018
Tomahawk Mk.II compared to Warhawk P-40N.

Opmerkingen

1 23 July 2018, 18:25

Björn Svedberg
I've started building the Airfix Curtiss Tomahawk Mk.II. I will do the sharkmouth version from the 112 squadron. Unfortunately, the PE kit I bought didn't contain any seat belts so I had to order them separately. So the build has ground to a halt as I don't want to seal the fuselage before the seat belts are mounted. More to come..😉

23 July 2018, 18:29

Björn Svedberg
Thanks Mate! 🙂

23 July 2018, 22:00

Norbert Steffens
fantastic cockpit.

25 July 2018, 07:01

Björn Svedberg
Thanks Norbert! 🙂

25 July 2018, 15:50

Erik Leijdens
Great start Björn. Will look at yours closely as I have the same kit and want to make the Desert scheme too

28 July 2018, 04:51

Kerry COX
There is some careful and fine work in there mate. Looking fine all over. 👍 🙂

28 July 2018, 05:32

Björn Svedberg
Thank you Erik, I'm looking forward to seeing your build😉.

28 July 2018, 14:43

Björn Svedberg
Thanks Kerry! Your work is truly amazing, so it means a lot to me to receive these encouraging words from you, master😉.

28 July 2018, 14:46

Björn Svedberg
The seatbelts have arrived, so I've done some more work on the Tomahawk. Riveting and all base painting is finished. Next will be a clear coat and decals.

31 July 2018, 14:10

Erik Leijdens
Nice nice nice Björn. I like what I see. Think I must start mine soon. The riveting look great!

31 July 2018, 15:29

Kerry COX
Björn, Is the pre shadowing really worth the effort. ? As I am old school who 'washs' the surface in an attempt to create that fine line weathering. 👍
But what I am seeing has still got me looking for more pop corn. 🙂 👍
Blu-Tac rules. 🙂

31 July 2018, 16:25

Soeren R.
Fantastic work so far Björn.

31 July 2018, 16:29

Jean Pierre CULIS-FERY
Joli travail.

31 July 2018, 16:54

Wim van der Luijt
I can only agree with the other mates, really nice project so far!

31 July 2018, 18:09

Björn Svedberg
Thank you mates! 🙂
@Kerry, the pre-shading isn't that much extra work and combining it with post-shading I think it can give some nice result. Especially on the under side. Not so much on the top side when doing a camo pattern as on this plane, though, where I painted the colors on top of each other. I usually don't do that, but I was going to use a darker shade of brown to start with, and then when I changed my mind to go with the lighter shade, I had already sprayed the first layer.. I'm doing a wash later on also to enhance the detail and create some weathering effects. 🙂

1 August 2018, 09:34

Björn Svedberg
I didn't get the fit of the shark mouth down right, so I will have to do some painting to fix it. I'm also thinking of doing some extra painting around the intake.

1 August 2018, 09:49

Kerry COX
Björn, thank you for that little bit of info, as I am yet to try it, just to say I have had a go at something new. 👍

1 August 2018, 10:34

Björn Svedberg
The sharkmouth is fixed! 🙂
A little bit of masking, spraying and hand painting with a bit of clear gloss over it and the shark grin is there. Next is assembly and weathering.

1 August 2018, 12:05

Erik Leijdens
Great fix on that sharkmouth. I believe the sharkmouth decals never fit like it is supposed to. Good job Björn. Your P-40 already looks very good

1 August 2018, 16:14

Björn Svedberg
Thanks James! 🙂
The Tomahawk is finished! 🙂 My first Airfix model was a really nice surprise. Fit and details were good and with the extra details from the Eduard pack it came out really nice, so I'm happy with it.

2 August 2018, 16:18

soheil moghisi
Very nice

2 August 2018, 16:44

Erik Leijdens
A great DAF Tomahawk Björn! Inspiring too

2 August 2018, 19:16

Kerry COX
Björn. I can well imagine the biggest smile on your face right about now, 🙂 🙂 🙂
'What a beaut' as we say here in Oz, and ready for that big gold medal too I'd say. hehehehe
Just beautiful my friend and worth every second too. 👍 👍 👍 🙂

2 August 2018, 19:24

Soeren R.
Great work Björn and nice to see another finished kit from you😉

3 August 2018, 04:38

Björn Svedberg
Thank you Mates!
You put a smile on my face. 🙂

3 August 2018, 19:59

Kerry COX
You put a smile on ours too mate. 🙂 🙂 🙂 👍

3 August 2018, 21:09

Wim van der Luijt
very inspiring build....you make it look easy!

4 August 2018, 08:44