I-16 Progress

1
June 10, 2019
All the interior and the small parts have been painted. Lets go on to the assembly.
2
June 10, 2019
The two fuselage halves does not fit together so I had to make a brace in between them to keep the round shape, and to make it fit the wing part.
3
June 10, 2019
Even after the brace, I had to add alot of clamps to keep the shape while the glue is setting. You can hardly see the plane 😉.
4
June 14, 2019
Alot of sanding going on 😉
5
June 14, 2019
I had to use alot of super glue to bridge the gap and make the transition smooth between the fuselage and the wing part as it did not fit at all.
6
June 14, 2019
Pre-shading finished!
7
June 14, 2019
I did the pre-shading on a black base this time.
8
June 14, 2019
Basic camoflage is finished!
9
June 14, 2019
I really like this paint scheme! 🙂
10
June 14, 2019
11
June 14, 2019
12
June 14, 2019
After a layer of gloss, it's time for decals.
13
June 14, 2019
Not alot of decals for this paint option.
14
June 14, 2019
Everything is finished and waiting for the first weathering stage with oil washes.
15
June 15, 2019
It is finished!
16
June 15, 2019
17
June 15, 2019
18
June 15, 2019
19
June 15, 2019
20
June 15, 2019
21
June 15, 2019
22
June 15, 2019
23
June 15, 2019
The decals were a little thick, so you can see the edge of them. In hindsight, I should have sanded them down a bit.
24
June 15, 2019
25
June 15, 2019
Engine ventilation closed.
26
June 15, 2019
And open.
27
June 15, 2019
I drilled out the center of the propeller hub and the wing mounted guns. I thought the recess, with matt black paint would be enough for the fuselage mounted guns, but unfortunately, it wasn't.
28
June 15, 2019
Themounting of the propeller in the kit wasn't good enough, too much gap, so it is tilting a bit to the side. I tried to fix it, but didn't succeed, unfortunately..
29
June 15, 2019
I also drilled out the exhaust pipes.
30
June 15, 2019
31
June 15, 2019
32
June 15, 2019
33
June 15, 2019
34
June 15, 2019
The wheel retracting wires were made by a bit of thin plastic rod painted in steel color.

Opmerkingen

1 10 June 2019, 16:13

Björn Svedberg
I've started the build of the little I-16 fighter. This is not the best of kits and it has a bunch of fit problems, but I hope the end result will be a nice little plane.

10 June 2019, 16:17

Daniel Klink
Björn is on my watch list again 👍 Following!

10 June 2019, 16:25

Artem Burkin
I have the same one in my stash & will get some 'fun' in future) Good luck with building, follow to the happy end)

10 June 2019, 18:33

Björn Svedberg
You are very welcome mates! 🙂
Another update, I have done all of the assembly and all the basic painting and decals, so next stage is weathering.

14 June 2019, 14:52

Björn Svedberg
Thanks James! 🙂
The little bird is finished. Although the build took alot longer than I had anticipated, due to fit issues, I really like the end result. The Polikarpov I-16 is a really cool plane.

15 June 2019, 13:50

Artem Burkin
Pretty good warbird

16 June 2019, 04:19