Scalemates Schwalbe Group build 2021
Opmerkingen
28 1 January 2021, 16:00
Jan PetersYou're quite welcome 🙂
I'm well underway now, really enjoying it!
Overall this is a nice kit, yet to get it to fit perfect it needs loads of fiddling. Also, detail is lacking here and there.
3 January 2021, 16:45
Łukasz GlińskiI struggled with the topsides of the wings too today. I seems they should be shorter on the fuselage end, but the edge is not straight there 🙁
Let's see if your tab concept works 🙂
3 January 2021, 20:21
Jan PetersMake sure you clean all of the flash, I got the upper wings to mate with the fuselage. The engine nacelles don't meet the wing on the front, these require some work too. Testfit everthing before glueing the top of the wings.
3 January 2021, 21:55
HSC1932Something I would recommend for filling is Vallejo putty. Just apply it and while it's still wet, use a damp cotton swab to wipe away the excess. You'll then have the gap perfectly filled without having to do any sanding (and thus sanding away the detail)
4 January 2021, 18:15
Łukasz GlińskiThere's even a better one I can recommend:
Perfect Plastic Putty (Deluxe Materials BD44, No).
Why? It's always water-washable, even after drying 😮
4 January 2021, 20:56
Jan Peters@Otto, I have valejo putty, but don't like it, as it tends to shrink. I have used Tamiya White putty, which works for me.
@Lukasz, I'll have a look at it, where can you buy this?
4 January 2021, 21:55
Łukasz GlińskiHere the Martola shop used to import it. It's made in the UK, so now I have no clue it's still available on this side of the Channel 🙁
5 January 2021, 11:01
Jan PetersI remember seeing these being sold at euro militaire, many moons ago. Will have a look sometime
5 January 2021, 11:31
Łukasz GlińskiOne important notice - it doesn't shrink, but also is not suitable for scribing.
5 January 2021, 12:02
Gordon SørensenPerfect is great for filling seams, Wing roots, and such. But not for any areas where you need to build-up, it dries too 'soft'. And as Lucasz mentioned, can't scribe it very well.
5 January 2021, 12:14
Jan PetersIt's just the basecolour, after drying the rest will follow, probably friday
5 January 2021, 14:56
Julian Herrero aka YuriOuahhhhh ,,, that's fast-modelling ,,,, I'm still trying to decide whether to build the Revell or the Airfix kit ,,,,, and, of course, which decoration go for.
Nice airbrush work BTW.
5 January 2021, 18:39
Jan PetersIt helps to have a few days off from work, yet tomorrow I have to work again, so progress will be slower again 😉
5 January 2021, 19:31
Jan PetersThanks mates.
Most of the decals have been aplied to the top, only the crosses on the wings are from the kit, unit marking, hull crosses and number two from japo, swastika from a kitsworld sheet.
10 January 2021, 15:51
Jan PetersI decided not to use the brassin wheels, as I feel this one is not good enough.I will use them on a future airfix me 262
29 January 2021, 14:45
Sebastian MeynerI was contemplating this paint scheme for my own 262...until I took a closer look 😉 You did it more justice than I ever could have done. Stunning paint job Jan 👍
29 January 2021, 17:41
Jan PetersThanks mates 🙂
Sebastian, just go for it, it looks harder then it actually is
29 January 2021, 18:13
Sebastian MeynerThanks Jan! For now I stick with my simple green-grey-white-red 'what if' japanese 262 😉
29 January 2021, 19:45
Jan PetersThanks mates, you are too kind🙂
Roland, this family is still growing, I have another four in my stash
7 March 2021, 12:27
Daniel KlinkAbsolutely amazingly cool and rare seen Camo Jan.
Wonderful executed .. I really like your Swallow... Very well done Mate 👍
7 March 2021, 12:47
Project info
Group Build
Scalemates Schwalbe Group build 2021
1. Januari tot 31. December 2021
1. Januari tot 31. December 2021