"DONE" Grunau 9 Glider - "Nürnberger Ei"
Same status as with my Grunau SG38 build. Need some Touch up and then ready for assembly and rigging.
From some remaining PE sheet I cutted the elbow fitting for the aileron.
Some stretched sprue is used for the wire.
Wire and fitting installed.
The wood effect on the "cabin" is giving me some hard times - I not sure how close to edges I can go with the decal stripes before I close the shell. I fear that the seam is very visible then,...
Preparing some "aid" material for the rigging - made from sprue.
Some additional material for rigging. Cutted and sanded from evergreen sheets.
All the wires are ready for the installation now.
Some final adjustments on the model are needed.
I insert some pieces of brass tube to simulate the mounting points espectively guide pulleys for all the wires for the control surfaces.
Sooo...rigging started.
I choose to start with rudder and elevator first. What can I say? PA clue was sticking on everything but the right ends of my wire - btw. the elevators broke loose twice,...But: finally - everything's fine 😉
Some more details on the wing...before we put them on.
Now with wings attached....
...and steering wires in place - lets go working on the "cockpit".
The "cabin" is finally finshed - I'am quite happy with the result.
Now the rigging of the wings start....I saw some pictures where the anchor of the wire and the turnbuckles near the the wingsurface is prodected with a kind of cover. Therefore you see this "V-shapes".
Riging of under wing went quite good.
Lowerside is done !
Only 4 wire to go,... but I gave up last night as - bad luck - I cutted a already installed wire per incident. Let's see how it will work out during the next session.
The last session was succesful 🙂 all wires installed finally.
I guess I can call this tinky glider "Done" now.
I will add some more pictures of this "Nürnberger Ei" soon when I have prepared my photocamera (with is slight better than my old mobilphone lense 😉)
Opmerkingen
27 11 July 2021, 18:56
Juergen Klinglhuber
Hi Robert - same story with this one as with the Sg38. Not many parts but still a tricky job. This one as a "Cockpit cabin" where I played alot (hours 🙂) with the wood effect... I hope it was worth it at the end...let's see.
thx for you interest.
Hi Robert - same story with this one as with the Sg38. Not many parts but still a tricky job. This one as a "Cockpit cabin" where I played alot (hours 🙂) with the wood effect... I hope it was worth it at the end...let's see.
thx for you interest.
11 July 2021, 19:13
Robert Podkoński
Looks perfect, Juergen, absolutely. Rigging is exactly what I find beyond my patience (if not my skills) for the moment - but in case of these gliders rigging adds the final interest. Keep up good work, surely it is worth the effort 🙂
Looks perfect, Juergen, absolutely. Rigging is exactly what I find beyond my patience (if not my skills) for the moment - but in case of these gliders rigging adds the final interest. Keep up good work, surely it is worth the effort 🙂
11 July 2021, 19:19
Juergen Klinglhuber
Welcome Alex and Skywalker. Here is a little up-date. Wires for the aileron movement are installed. I made some progress on the "cabin" too.
Welcome Alex and Skywalker. Here is a little up-date. Wires for the aileron movement are installed. I made some progress on the "cabin" too.
18 July 2021, 20:35
Robert Podkoński
Who would say that there is so much to do with a simple glider's model...;) I am impressed with your work already.
Who would say that there is so much to do with a simple glider's model...;) I am impressed with your work already.
8 August 2021, 17:25
Juergen Klinglhuber
@Skywalker - I use viscoelastic yarn (product: Rig that Thing - shop: Uschi van der Rosten).
@Skywalker - I use viscoelastic yarn (product: Rig that Thing - shop: Uschi van der Rosten).
12 August 2021, 20:24
Juergen Klinglhuber
Thx Alex K & Alex R. thx Thomas & Mark
I am glad you like it.
Thx Alex K & Alex R. thx Thomas & Mark
I am glad you like it.
15 August 2021, 20:45
Juergen Klinglhuber
Thx Major Flannel.
The Grunau 9 Glider in the "egg" config is finshed now. DONE with this project....the Glider 38 is close to be finsihed too. Thx for watching and your interesed.
Thx Major Flannel.
The Grunau 9 Glider in the "egg" config is finshed now. DONE with this project....the Glider 38 is close to be finsihed too. Thx for watching and your interesed.
9 October 2021, 09:58
Robert Podkoński
Fantastic work, Juergen - I am sure we all are waiting for more photos here 😉
Fantastic work, Juergen - I am sure we all are waiting for more photos here 😉
9 October 2021, 12:24