Bordurian Westland Lysander
![Album image #1 Album image #1](/albums/img/9/5/4/1291954-27411-92-720.jpg)
Printed Bordurian Roundels )with a red outer ring to show up against the black overall colour)
![Album image #2 Album image #2](/albums/img/9/4/4/1291944-27411-94-720.jpg)
Injector marks on inside filled or sanded (both are needed!) and some areas thinned
![Album image #3 Album image #3](/albums/img/9/4/3/1291943-27411-29-720.jpg)
Interior put together and glued to one side
![Album image #4 Album image #4](/albums/img/9/4/6/1291946-27411-29-720.jpg)
Fuselage glued together
![Album image #5 Album image #5](/albums/img/9/4/7/1291947-27411-26-720.jpg)
Vac-form canopy sections masked before separating as it seemed easier
![Album image #6 Album image #6](/albums/img/9/4/5/1291945-27411-58-720.jpg)
Canopy sections sprayed interior green on the outside to make it easier to see where to cut
![Album image #7 Album image #7](/albums/img/9/4/9/1291949-27411-88-720.jpg)
Landing gear pieces - I have thinned the inside of the spats (one half of each side is very thick) and added a sanded-down strut (which is designed for use on the version with opened-up spats)
![Album image #8 Album image #8](/albums/img/9/4/8/1291948-27411-88-720.jpg)
Landing gear pieces painted
![Album image #9 Album image #9](/albums/img/9/5/0/1291950-27411-63-720.jpg)
Landing gear glued together, filled and sanded
![Album image #10 Album image #10](/albums/img/9/5/1/1291951-27411-12-720.jpg)
The propeller comes as a resin hub and injection molded blades and spinner. I drilled 0.4mm holes in all and pinned the blades with steel wire. Here the blades are being glued in place using a Kora jig
![Album image #11 Album image #11](/albums/img/9/5/2/1291952-27411-17-720.jpg)
Finished propeller
![Album image #12 Album image #12](/albums/img/9/5/3/1291953-27411-71-720.jpg)
Resin engine cleaned, repaired and painted and cowling glued together. Interior and front of cowling have also been painted
![Album image #13 Album image #13](/albums/img/1/9/1/1293191-27411-61-720.jpg)
Front and back sections of canopy attached. Found the moulded-on wing mounts were set too low, so I glued on replacements set higher and cut off the originals
![Album image #14 Album image #14](/albums/img/1/9/2/1293192-27411-97-720.jpg)
Top section of canopy attached. Some of the original masking didn't survive and will be replaced.
![Album image #15 Album image #15](/albums/img/0/8/3/1294083-27411-40-720.jpg)
Landing gear lights include a resin light and a vac-formed cover. The cover had to be roughly shaped, glued in place and then heavily sanded to shape and polished (luckily its quite thick). Here the left shows the components and the right is complete
![Album image #16 Album image #16](/albums/img/0/8/4/1294084-27411-63-720.jpg)
Main landing gear complete and attached.
![Album image #17 Album image #17](/albums/img/5/8/3/1294583-27411-19-720.jpg)
Canopy repairs completed and re-masked. Engine and cowling attached and tail surfaces attached. Starting to look like a Lysander
![Album image #18 Album image #18](/albums/img/7/0/1/1294701-27411-14-720.jpg)
And finally wings attached - some clean-up needed on the strut joins to the wings and undercarriage but after that, and a bit more masking, it will be on to paint
![Album image #19 Album image #19](/albums/img/3/5/6/1295356-27411-39-720.jpg)
A coat of gloss black has been sprayed on, touch-ups done where needed, Clearfix windows added at the back and final bits added. Ready for decals tomorro
![Album image #20 Album image #20](/albums/img/8/1/4/1295814-27411-55-720.jpg)
Decals applied - probably could have made the red circles a bit broader but I'm reasonably happy with them
![Album image #21 Album image #21](/albums/img/0/7/8/1332078-27411-89-720.jpg)
![Album image #22 Album image #22](/albums/img/0/7/7/1332077-27411-77-720.jpg)
![Album image #23 Album image #23](/albums/img/0/7/9/1332079-27411-75-720.jpg)
![Album image #24 Album image #24](/albums/img/0/8/0/1332080-27411-66-720.jpg)
![Album image #25 Album image #25](/albums/img/0/8/1/1332081-27411-29-720.jpg)
![Album image #26 Album image #26](/albums/img/1/0/1/1332101-27411-30-720.jpg)
![Album image #27 Album image #27](/albums/img/0/8/4/1332084-27411-46-720.jpg)
![Album image #28 Album image #28](/albums/img/0/8/3/1332083-27411-52-720.jpg)
Opmerkingen
18 28 August 2022, 01:07
![](/profiles/img/27411-254-s.jpg)
Thanks Bas - they're fun things to build as you don't have to be super accurate (they can sometimes change from panel to panel in the books) and some of them you see so little of that you can be as creative as you want!
30 August 2022, 06:44
![](/profiles/img/13641-502-s.jpg)
Watching, not a big Tintin fan, but I have the very same kit in my stash and wonder how bad it could be 😄
Very useful vacu canopy hints, thx
30 August 2022, 08:59
![](/profiles/img/27411-254-s.jpg)
Thanks Matthew. Lukasz - its a short-run kit, but certainly not the best version of those. I had to sand down the inside of trailing edges of the wings before gluing the halves together to make them look decent. I also had to go around every injection moulded piece looking for extra areas of plastic that needed to be trimmed off (the two windows at the rear of the fuselage were bad - one was completely closed over and had to be drilled out and then filed to shape.) and lots of flash as well, especially on the cockpit interior parts. However the detail is quite good and I'm hoping it will turn out OK.
30 August 2022, 13:36
![](/profiles/img/27411-254-s.jpg)
Thanks for comments and likes - this one is done now, just waiting for some final photos
13 September 2022, 05:01
Album info
While Tintin and crew are at the Syldavian moon launch facility it is overflown by an unknown plane (presumably Bordurian) that looks a lot like a Westaland Lysander. I've chosen to build the Pavla Lysander Mk.II kit, largely out of the box, except for a replacement Lewis gun from the spares box (as the kit item is pretty crude) and a Yahu instrument panel. The plane is only shown in silhouette in the book so I'll paint it black as a night infiltration/spy plane with home-made Bordurian markings