Russian 1S91 SURN Kub Radar
Trumpeter | Nr. 09571 | 1:35
Fakta
- Merke:
- Trumpeter
- Tittel:
- Russian 1S91 SURN Kub Radar
- Nummer:
- 09571
- Skala:
- 1:35
- Type:
- Byggesett
- Utgitt:
- 2019 New tool
- Strekkode:
- 9580208095714 (EAN)
- Emballasje:
- Stiv boks (Toppåpning)
- Tema:
- 2K12 Kub » Selvkjørende artilleri (Kjøretøy)
Eskens innhold
Dimensjoner:
450x290x80 mm
(17.7x11.4x3.1 inch)
Vekt:
760 g (1.68 lbs)
Produktets tidslinje
Trumpeter
2019
Bruksanvisning
Last ned 16604Kb (.pdf)
Markedsplass
Nettbutikker
USD 93.74
På lager »USD 113.59
På lager »USD 121.51
På lager »USD 131.05
På lager »USD 135.99
På lager »USD 83.33
Tilgjengelig »Vis alle tilbud » (16 totalt)
Privat salg og bytte
Alternative SKU-er for Trumpeter 09571:
TRUM09571 | TRU09571 | TR09571 | TRUMPETER09571 | PKTM09571 | TR 09571
Merk: Priser og tilgjengelighet er kun indikasjoner. Sjekk også om produktet faktisk stemmer overens!
Relaterte produkter
CZECHOSLOVAK & SLOVAK MILITARY VEHICLE INSIGNIA OZNAČENIE VOJENSKEJ TECHNIKY SLOVENSKA A ČESKOSLOVENSKA Aršík znakov používaných na vojenskej technike ČSĽA, ČSA a ASR
KPM Prešov 1:35
M35001 Flertema (1!!)In-box anmeldelser
Eksterne anmeldelser
Død lenke David's Modellbaukeller
Galleri
Alle artikler » (11 totalt)
Kommentarer
Vesa-Pekka Palmu
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.
1 6 November 2021, 09:56
Vesa-Pekka Palmu
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.
6 November 2021, 10:00
Vesa-Pekka Palmu
So check the fit of all hatches before gluing any of them in place.
So check the fit of all hatches before gluing any of them in place.
6 November 2021, 10:00
Treehugger
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).
6 November 2021, 11:12
Referansemateriale
SA-6 Gainful Launcher and Radar Vehicles
Present Vehicle Line Nr. G 046
Jan Horak, Frantisek Koran
2016 SA-6 Gainful in detail Soviet Anti-aircraft Mobile Rocket System
Present Vehicle Line Nr. G 015
František Korán, Tomáš Bouchal, Jan Horák
Alle visninger » (6 totalt)