Nyhetsstrøm

Freak
Awesome weathering! How did you do that? Pre-shading, post-shading? And how many washes? I guess that looks like at least a grey and a rust wash

Magenta
Thank you Mr. Freak. And sorry for replying more than a year late. All weathering was done by post shading. The paints I used were Tamiya panel line accent color dark gray and GSI Creos Mr.weathering color ground brown.

Freak
Thank you! I'm constantly asking for tips from the best modellers on scalemates and am still model building (though a 1:1 scale house is keeping me busy these weeks).
It's a lovely surprise to get this info suddenly in my notifications! Looking forward to your next builds!

Finn
Like it a lot!

Magenta
Thanks a lot!

Christos Gravanis
-Hey Hangman you look good
-I am good Rooster,I'm very good!

Gerald
Hello Welcome here 😉

CopperLlama
Thank you

BetterTimes-Henry
Looks great. I have the kit in my stash, will have to build it soon 👍

Desert Marlin
After two hours, the whole cockpit, wings and "fuselage" were together. I got totally sucked in after the first two hours and it really got in the way of other projects! So fun!!!

Desert Marlin
Biggest issue is the choice of D-Day markings. The white bands are 60 mm on each wing and on the booms. This makes the individual stripes 12 mm. Pretty easy once you see it. I started out with 50 mm white band. That was clearly too short.

Desert Marlin
Model Master Neutral Gray on the underside and Vallejo 71.043 (US Olive Drab) on top. Lots of Tamiya Panel Line accent black overall.

Desert Marlin
The Mig Rigging is pretty fine... takes some "getting used to".

Desert Marlin
I have seen claims that Olds first two kills were in this specific aircraft.

Gary Victory
Really nice work DM....Lovely build.
Best story around Robin Olds in a P-38 was that he got behind a flight of 109's.....he was ready to open fire when his engines cut - dead. He had forgot to switch tanks to his internals when he jettisoned his external tanks. Instead of resolving his fuel transfer issues he just carried on lining up on the 109 and shot it down while in 'glide mode'. That's calmness under pressure for you.

Never a Pro
Great build! The nose wheel is up, does the the nose weight ball included in the kit need to be reinforced with extra lead?

Neuling
Top result!

Desert Marlin
Thanks all…
The nose wheel appears elevated because I use a sheet of glass on my bench. The glass is 1/4" thickness.

Pietro De Angelis
Beautiful, fantastic details and finiture!

Desert Marlin
Thank you!

Desert Marlin
Now if I can get my antenna insulators to compare with Bernhard Schrock's Sea King! Definitely a worthy target!

Rui S
Great Paintjob & weathering 👍 very Nice antena too 😄

Desert Marlin
Thanks!

Mr James
Lovely lovely work. Great painting and the weathering is just right

Desert Marlin
Aye! Thanks!

George Adamopoulos
Great result! Congratulations!

After reading Olds' biography, I have just started building the same kit, although I plan to do the narural metal version. How were the decals from kitsworld? Are they ok or do they require special attention?

Villiers de Vos
Very nice work.

Marcin Dudek
Superb job 👏 Very nice Lightning

Desert Marlin
Hi George. I would be careful with the KitsWorld decals. They really don't have much film on them. I recommend getting the decal placed and see if it needs any attention after it dries. Aggressive setting solutions are not needed. Go slow!

Desert Marlin
Thanks all for the comments! I really like this kit!

Víctor Rosas
Stunning! Great job!

George Adamopoulos
Thank you!

Tim
NIce

Villiers de Vos
Steady progress. Did you light the stern?

Thomas Wirsching
Great job so far! I would love to get an explanation about how to do these LED lighting in detail as I have no idea about this.

Hang Li
Thanks Tim, Villiers, and Thomas. I did put a led for the trolled sonar bay back at the stern. It is apparently not bright enough to be really visible. Probably not noticeable after finished.

I prefer to use Led tape light as it has build in resistors so I don't need do calculation to figure out the resistor value. Once that is sorted, what left is just connect the led unit with a battery and a switch. I think it is better to ask a trained electrician as the circiut I built don't last long and I don't really know why.

Michael Kohl
I expect modelling of the highest quality from your bench. So far I am not disappointed. 🙂
Keep it up.

Treehugger
Hm, how long did it take to make the nice looking ocean surface? It certainly looks like a fun project.
I wish I knew how to make such ocean surfaces, as it really seem to complete a model with such a diorama.

I am no expert on led's but my impression is that one has to be careful that the voltage to the led's is controlled to specs, so they don't burn out shortly after and end up being un-repairable inside the model. Also, something about connecting led's in parallel, pattern iirc, to avoid one dead led blacking out all the rest of the leds in a serial connection, iirc.

Thomas Wirsching
Your build is already mindblowing; 漂亮]!

Tim
Your sea base is looking really nice.

Hang Li
Thanks Treehugger, THomas and Tim.
As for the sea base, you can check a YouTube channel called ''studio blue ocean'', I basically followed his videos. And treehugger did a pretty good summary for LEDs. The voltages is very important and it is always needed to put some resistors in series to potect the LEDs. The size of the resistors can be calculated with ohms' law. There are small circuit boards for LEDs which can be used to make everything easier.

Rui S
Impressive work 👍

Villiers de Vos
Fantastic work with all the photoetch parts. Your attention to detail shows.

Thomas Wirsching
Getting better and better; can you please show us a detail picture from the inside of the hangar? Did you build this from scratch?

Hang Li
Thanks, Rui and Villiers. I just masked the hangar as I am going to paint the outside. I will get better hangar photos once finish. The trumpster kit comes with the hangar and the ceiling is in good detail (I only add LEDs to the ceiling). Only the walls need additional work to add details, like handrails, supports etc.

Ingmar Stöhr
Wow! Fantastic detail work and great job on the weathering and the base!

Gary Victory
Really nice work Hang. Looking like a great build.

Villiers de Vos
Fantastic finish.

Ingmar Stöhr
@Hang Li: For the 'oil canning' effect. Did you have accurate plans for the frame spacing or how did you come up with the pattern you used? I have to say that is look really convincing after some more weathering effects are applied on top.

Hang Li
thanks Ingmar, Gary and Villiers. As for the 'oil canning' effect, I found some photos which are somewhat visible for this effect as reference for the pattern and I have to simplifie the pattern to make it practical. So it is not quite accurate. I got some pre-cutted masking paper in 1mm, 2mm, and 3mm and I just picked one that I believe is most suitable.

Ingmar Stöhr
Thank you for the explanation! It looks convincing to me! Keep up the great work!

Michael Kohl
That oil can effect worked really great.

Mr D
Enjoy 😃👍

Rui S
I'm in 😎

Mark Sherwood
Thank you both 🤘🥸🤟😀👍

Mark Sherwood
Mojo de Virus and everyone else thank you for the likes. 🤟🥸🤘

Mark Sherwood
Cheers Mark. 🤘🥸👍

Mark Sherwood
Thanks MFranc for the like. 👍🥸🤘

Mark Sherwood
Thanks for the like Mr Laws. 🤘🥸🤟

Mark Sherwood
Ta. Guillaume. 🤟🥸👍

Mark Sherwood
👍👍👍👍🥸 Jusfiko.

Mr D
Nice project 👍
The right choice of kit for this model..... Definitely am interesting paint job ahead 👍

Mark Sherwood
Definitely a USAF Scheme Mr D and once I source some extras it will be in the pipeline. Thanks for the like too.

Mark Sherwood
Mojo de Virus and everyone else thank you for the likes. 🤘🥸🤟

Guillaume Blanchet
Nice additions!

Mark Sherwood
Thanks Guillaume. 🤘🥸🤟

Mark Sherwood
Cheers Villers. 🤟🥸🤘