Nyhetsstrøm
David Fullerla til et nytt fotoalbum
86 bilder
NWT Canadair CL.215
1:72
And here's how it will look when assembled.
Prosjekt: Canadair C.L 215
2+ 39 25 March, 03:08
David FullerOoh, spectators. This is new for me!
Be forewarned, I'm a very slow builder.
4 April, 01:27
Gordon SørensenNice work so far, David. Are you going to open any of the doors/hatches? I have the 415 kit I want to do in Alberta colours.
10 April, 04:56
David FullerThanks Gordon! The PE sheet I'm using comes with the forward door, so I'm going to try assembling that first and if it comes out well enough, I'll open that door on the kit. I've also been toying with the idea of opening the dump doors on the bottom of the fuselage.
10 April, 12:23
Chris HowardLooking great. I didn't get a PE set for my 415 but I think I have some stuff to do the mesh screens on the sides. Sure looks a lot better on yours.
22 April, 12:10
RandoNice! I dig water bombers, there should be more models of them built. Will gladly watch
17 May, 02:00
David FullerSorry for the lack of updates lately guys. I've been working on lots of little things and have been dealing with other stuff that kept me from posting. I just posted a bunch of stuff I've been doing over the past couple of weeks.
17 May, 02:10
David FullerBeen a while since I posted an update, but I have been working. Slowly. I seem to have also developed a case of Advanced Modeling Syndrome.
Crap.
31 May, 02:10
CuajeteMany of us suffer from this syndrome when the model advances. Don't worry. It is usually normal 😄
Good job with the top hatch, David! 👍
31 May, 17:51
bughunterThe reason for the AMS is the environment here. The risk of infection is very high!
You made nice work on the yellow bird so far 👍
Since I visited the real one in a museum in Germany I'm also a fan of this type. It is possible to visit it inside. sinsheim.technik-museum.de/de/canadair-cl-215
31 May, 19:04
Spanjaardthere are a few 215 to view at leisure in some museums (Paris/le bourget, Madrid/Cuatro Vientos,....), but I did not know there was you can even see the inside! I need to het to sinseheim, seems a great place!
31 May, 21:15
bughunterI can recommend it! Nearby is a second museum in Speyer, both are connected. So we visited both with a Combi ticket on a weekend, hotel can be booked too.
In Sinsheim you can go also inside of Concorde and Tu-144 😉
Sorry David fro hijacking your thread!
31 May, 21:27
Pantelis AntonoglouExceptional guide for my model too, thanks a lot for your reference!! Keep up the amazing work mate!
12 July, 17:34
Dmitri Belousovønsker
German dispatch rider Standing with a motorcycle
Copper State Models (CSM) 1:35
F35-056 2024 New tool 12 July, 17:32
Dmitri Belousovønsker
Russian Aerospace Forces Technicians. SET No. 1-1 MIG-21, SU-24
Tempmodels 1:72
72131-1 2024 New tool 12 July, 17:30
Dmitri Belousovønsker
Russian Aerospace Forces Technicians. SET No. 1-3 MIG-21, SU-24
Tempmodels 1:72
72131-3 2024 New tool 12 July, 17:30
Ben Mla til et nytt fotoalbum
19 24 October 2018, 02:06
Alexander GrivonevIt's really important these days to get the kids from their electronic gadgets and show them a different world 👍
11 November 2018, 00:28
Tom ...Wow, Ben. That is some model! What kit is it? And where are you going to put it! 🙂
2 January 2021, 21:04
Ben MHi Tom, it's not a kit, I bought it used years ago, and was just making some repairs to it before putting it on the mantelpiece. I had an outdoor layout at my old house but have not built a new one at this house yet.
2 January 2021, 21:41
Tom ...I thought as much. It looked like it actually runs. Some part of me would love to get into model railways but definitely don't have the time or space (and probably money) to do it. Maybe when I retire and move to place with a large basement, or attic, then I might be tempted. Too many interesting hobbies and not enough time...
2 January 2021, 21:56
JDHey Ben, I'm ready to follow your Space 1999 Eagle 1 build, whenever you're ready.😉
3 January 2021, 01:34
JDOh man! Thanks, I never would have found it. Cool, you went for the V.I.P orange scheme. Nice. I have never posted mine, maybe I should..
3 January 2021, 01:59
Ben MYes, I thought it added interest. It was my first photoetch experience. The kit is terrible of course but fun to build nonetheless. Now the eagle box holds my decal stash.
3 January 2021, 02:05
Ron GarciaA very nice kit with an impressive gun! Very straightforward build with no real issues - except one (for me, anyway). Study the instructions carefully, though, because the Dutch army version requires lots of modifications. I went with the German one, but I still almost made a few mistakes here and there.
The only thing that was a MAJOR pain was the tracks. Awful! Inside the kit is a small box that holds all the track pieces. I thought, great, Meng cut out all the pieces already. How wrong I was! The tracks come in three pieces and are designed to be workable. They took FOREVER to cut out and clean up. Seriously, what a waste of time. Luckily, I was taking an online course that featured a lot of audio. That helped me pass the time while cutting out and cleaning up all those pieces. Then you have to put them together...
A piece with two rods on either end needs to be trapped between the upper and lower parts of the track. Very tedious! There is a jig, but since it's made of styrene, you'll end up with a sticky mess if you use it. Since I could care less about working tracks, I glued mine together - one at a time. I laid the rod section on two bottom tracks, sandwiched one side with one top one, laid the next rod piece with the next bottom section, sandwiched that one, and on and on it went. Thank God there are side skirts on the kit. That meant I could get away with going just far enough so that either end of the tracks covered the first return roller on its respective end. That saved some time. I know some of you hardcore armor model enthusiasts will consider this heresy, but considering the tracks are taut anyway, vinyl tracks would have been a way better alternative. Sure, maybe some detail would have been lost, but really, unless you're entering it into a contest, would it really be that noticeable?
I ran into two other slight issues. First, I found PE part X6 interfered with the turret. I placed the part right, but the turret will hit it when rotated. I always pose my turrets with the gun pointing off center and the barrel going over the right front fender, so it wasn't an issue for me. But if you pose yours straight ahead, it will hit it and pop it off. The other issue is the instructions about the length of the towing cable. The directions are written poorly (the English version anyway). It says to CUT OFF 125 mm (or 140 mm for the Dutch version). Usually, the instructions say what the length should be. Of course, I cut mine short, but since I still had the other piece, I was able to make it work.
Other than the nightmare that was the tracks, I really liked this kit. The sorta turtle shell looking turret combined with that awesome gun looks very impressive on my shelf. I'd like to say I recommend this kit, but the tracks just ruined it for me. I'm glad I have this kit in my collection, but if I would have know what a pain the tracks were going to be, I'd have never purchased it. Your opinion, of course, will vary.
11 July, 17:35
Ben MI appreciate your reviews. I've started doing armor models with individual link tracks and good lord what a hassle they are, for me, I agree, rubber bands would usually be fine for most models.
11 July, 17:44
Ron GarciaHey Ben,
Thanks for the nice comment. Yeah, unless the tracks need to drape over the road wheels, individual tracks are sort of a pain. They add nothing to my enjoyment of the build for sure. Speaking of another gripe, my next build was going to be Hobby Boss' SS-23 Spider. However, I saw that there are a TON of microscopic PE tie down brackets that require copper wire to be threaded through them. I promptly put the lid back on and set it aside. Maybe one day down the line I'll attempt it, but right now, I need a break from over-engineered kits!
12 July, 16:42
Ben MI like to joke that I am a member of the non-aligned movement. I build a lot of old kits where the parts don't align. It seems your choices are often a PE nightmare or something that doesn't fit together. I offer the new tooling Tamiya Matilda II as an alternative. The parts fit together so well when I would test fit them, they were difficult to separate so I could glue them. Both rubber band and plastic tracks included (I used the rubber bands; you can hardly see the tracks on a matilda due to the skirts anyway). If I could find more kits like this, it would be great. But for now I'm sticking with simple kits with parts that don't fit.
12 July, 17:29
Bart Lla til et nytt fotoalbum
10 July, 20:59
Bart LI am building it now, the parts don't quite fit, so I am stuck trying to finish it, I will share when I am done. Iit is pretty cool, Renwal made some interesting science kits, so you can study anatomy and understand
12 July, 15:42
Bart LI had to scan these instructions in multiple parts, then tile them together in photoshop. this kit has been a journey!
12 July, 15:44
Ben MI've seen some of these show up sometimes at antique stores and I've thought about buying one but so far they have been too expensive for me.
12 July, 17:26
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo