Nyhetsstrøm
Ronan
la til et nytt fotoalbum
la til et nytt fotoalbum
103 19 May, 16:00
Daniel Mysak
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
24 May, 09:05
Oleg Bogolei
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
24 May, 13:25
Ronan
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
24 May, 15:19
Ronan
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
24 May, 15:25
Juergen Klinglhuber
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
31 May, 15:51
Ronan
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
31 May, 19:11
Ronan
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
10 June, 17:42
Patrick Hagelstein
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
10 June, 18:29
Skyhiker
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉
23 July, 12:56
Palo M
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂
Is the "Hobbyboss" in the album title a joke or a mistake?
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂
Is the "Hobbyboss" in the album title a joke or a mistake?
23 July, 14:32
Spanjaard
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....
27 July, 07:59
Ronan
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.
29 July, 07:51
Eric Duval
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂
3 August, 18:43
Harry Eder
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?
6 August, 14:04
Ronan
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂
6 August, 16:41
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
10 5 August, 23:05
Ludvík Kružík
Description and photos of the model construction can be found here: Avia BH-10, first production run - WIP | Album by KLuK (1:48)
Description and photos of the model construction can be found here: Avia BH-10, first production run - WIP | Album by KLuK (1:48)
6 August, 06:03
Ludvík Kružík
Thank you for your kind feedback. I really appreciate it and I'm glad you like the Avia. 🙂
I plan to expand my Avia collection with more models in the future. For now, however, I intend to move closer in time to the present and focus on more modern machines.
Thank you for your kind feedback. I really appreciate it and I'm glad you like the Avia. 🙂
I plan to expand my Avia collection with more models in the future. For now, however, I intend to move closer in time to the present and focus on more modern machines.
6 August, 10:57
Zac Yates
ønsker
ønsker
P-51D Mustang vs Messerschmitt Bf109F-4 Dogfight Doubles
Airfix 1:72
A50193 2024 Nye dekaler Flertema (1!!)7 August, 07:14
Robin Osinga
la til et nytt fotoalbum
la til et nytt fotoalbum
8 11 July 2023, 09:44
Goldman
Hello Robin.
Great looking mode. What color did you use for the green? Looks really good.
How is this model? Interesting looking vehicle but quite expensive. I am trying to decide if it worth it...
Hello Robin.
Great looking mode. What color did you use for the green? Looks really good.
How is this model? Interesting looking vehicle but quite expensive. I am trying to decide if it worth it...
7 August, 07:10
Kaiser116
eier nå
eier nå
The Dornier Do 335 Pfeil Second Edition A Complete Guide To The Luftwaffe's Fastest Piston-engine Fi...
Airframe & Miniature Nr. 9
Richard A. Franks
2018 7 August, 07:08
Przemyslaw Sroczynski
la til et nytt fotoalbum
la til et nytt fotoalbum
13 23 July, 23:21
Michael Kohl
There were a lot of things I didn't like at this kit and started to alter. Very nice OOB build of yours.
There were a lot of things I didn't like at this kit and started to alter. Very nice OOB build of yours.
7 August, 07:08
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo