Nyhetsstrøm
Donald Dickson II
la til et nytt fotoalbum
la til et nytt fotoalbum
17 17 May, 01:37
Donald Dickson II
OK, so I am doing another Phantom. Almost as surprising as me doing an Eagle. 😄 LOL
So, I was asked to do one to use the landing gear and exhaust set by 3D Chute Expert out of Taiwan. My club Pres has a page that he highlights builds and products, and 3D is one of the companies he showcases. So he sent me this set, which is not in the database here yet. But to the build.
This is the Academy kit. I LOVELOVELOVE this kit. This is my 3rd one. The only drawback to the kit is the gear wells, but I think I have the best way to do them figured out now. Still the only part of the kit I detest. So, as I wait for the Eduard PE for the cockpit to get here, I moved right on to the landing gears. As I said, I was given this set to try out, and I will give my honest opinion. You all know I dont mince words. LOL That being said, these things are great! The detail is superb. They fit right into the wheel well with no hassles. I simply hit them with some gloss white, a dirt wash as this is going to be Col Olds's plane as it flew, not as the museum piece. Did a couple of the lines black and poof, thats it. No need to add any parts from the kit (aside from maybe landing lights) as they have every detail already on them. A total winner in my book.
And as to the subject matter. If you dont already know, Col Robin Olds (he eventually made Brigadier General) was one of the best pilots to grace the cockpit of an aircraft. Triple ace between WWII and Nam. Definitely should read up on him. There arent many, if any, left like him. If youre a Phantom phan and a USAF guy, this plane is a must do. 🙂
OK, so I am doing another Phantom. Almost as surprising as me doing an Eagle. 😄 LOL
So, I was asked to do one to use the landing gear and exhaust set by 3D Chute Expert out of Taiwan. My club Pres has a page that he highlights builds and products, and 3D is one of the companies he showcases. So he sent me this set, which is not in the database here yet. But to the build.
This is the Academy kit. I LOVELOVELOVE this kit. This is my 3rd one. The only drawback to the kit is the gear wells, but I think I have the best way to do them figured out now. Still the only part of the kit I detest. So, as I wait for the Eduard PE for the cockpit to get here, I moved right on to the landing gears. As I said, I was given this set to try out, and I will give my honest opinion. You all know I dont mince words. LOL That being said, these things are great! The detail is superb. They fit right into the wheel well with no hassles. I simply hit them with some gloss white, a dirt wash as this is going to be Col Olds's plane as it flew, not as the museum piece. Did a couple of the lines black and poof, thats it. No need to add any parts from the kit (aside from maybe landing lights) as they have every detail already on them. A total winner in my book.
And as to the subject matter. If you dont already know, Col Robin Olds (he eventually made Brigadier General) was one of the best pilots to grace the cockpit of an aircraft. Triple ace between WWII and Nam. Definitely should read up on him. There arent many, if any, left like him. If youre a Phantom phan and a USAF guy, this plane is a must do. 🙂
17 May, 02:05
Donald Dickson II
Landing gear installed and wings together. Intakes together and done with the latex paint method. Got the PE for the pit finally, so that has commenced as well.
Landing gear installed and wings together. Intakes together and done with the latex paint method. Got the PE for the pit finally, so that has commenced as well.
18 May, 20:17
Donald Dickson II
OK, PE installed for the pit. The lading gears came with wheels as well. And they are just as nice as the gears. Just gotta add a little dirt to em. And the seats from the kit. I could have sworn I had some resin seats in my parts box, but alas, no. I ordered the PE belts to dress up these. They are pretty good aside from no belts. I need to redo the oh shit handles.
OK, PE installed for the pit. The lading gears came with wheels as well. And they are just as nice as the gears. Just gotta add a little dirt to em. And the seats from the kit. I could have sworn I had some resin seats in my parts box, but alas, no. I ordered the PE belts to dress up these. They are pretty good aside from no belts. I need to redo the oh shit handles.
20 May, 20:02
Donald Dickson II
David, I did a sort of tutorial...
Intake painting | Album by smokeriderdon
David, I did a sort of tutorial...
Intake painting | Album by smokeriderdon
21 May, 14:10
Donald Dickson II
Augie, thanks! Maciej, welcome!
OK, its starting to look like a Phantom now.
Augie, thanks! Maciej, welcome!
OK, its starting to look like a Phantom now.
23 May, 00:54
David H
Cheers Don, I'm definitely giving that a try. Just got to find some paint 😁👍🏻 which I've just learned from a quick google search is known as "emulsion" here in the UK ! 😁
Cheers Don, I'm definitely giving that a try. Just got to find some paint 😁👍🏻 which I've just learned from a quick google search is known as "emulsion" here in the UK ! 😁
23 May, 07:51
Donald Dickson II
Its a mess, but it works pretty well. 🙂
Got the tires on, front landing gear on. These things look fantastic in place. Again, cant recommend them enough. Ill be using his products more often I think. Also, I got one seat done with the PE belts. Man its tedious. Doing just this convinces me I will NEVER do a freaking ship. LOL
Its a mess, but it works pretty well. 🙂
Got the tires on, front landing gear on. These things look fantastic in place. Again, cant recommend them enough. Ill be using his products more often I think. Also, I got one seat done with the PE belts. Man its tedious. Doing just this convinces me I will NEVER do a freaking ship. LOL
29 May, 02:17
Donald Dickson II
OK, back to this one. Primed and silver sprayed a bit. You can see the blue spots. Thats masking fuid. Once I paint the camo over it, I will scrub the paint and get the chipping effect his plane has in the pic.
Thats the plan anyway. LOL
OK, back to this one. Primed and silver sprayed a bit. You can see the blue spots. Thats masking fuid. Once I paint the camo over it, I will scrub the paint and get the chipping effect his plane has in the pic.
Thats the plan anyway. LOL
12 July, 23:18
Skyhiker
la til et nytt fotoalbum
la til et nytt fotoalbum
78 bilder
Focke Wulf Ta 152 H-1 (1970 tooling)Ny: 12 July, 22:21 1:72
On the left I engraved a recess in the landing gear door and on the right is the original kit with injection mold keys i...
Prosjekt: Focke-Wulf Ta 152 H
61 27 January, 18:23
Skyhiker
My next big project is turning this FROG into a Prince. Wish me luck I'm going to need it.
My next big project is turning this FROG into a Prince. Wish me luck I'm going to need it.
27 January, 18:25
Nicolas
I'm following. In my opinion the Ta-152H is the most beautiful plane of WW II. I got the kit from Kora in my stash and hope to start the build in spring this year. Good luck and, above all, have fun building it.
I'm following. In my opinion the Ta-152H is the most beautiful plane of WW II. I got the kit from Kora in my stash and hope to start the build in spring this year. Good luck and, above all, have fun building it.
27 January, 20:18
Skyhiker
Nicolas, I agree. It's a long, lean, fighting machine as they say. Definitely one of the more elegant designs to come out of the war.
Nicolas, I agree. It's a long, lean, fighting machine as they say. Definitely one of the more elegant designs to come out of the war.
27 January, 22:10
Skyhiker
I had to widen the fuselage today, in order to make space, before I scratch build the cockpit.
I had to widen the fuselage today, in order to make space, before I scratch build the cockpit.
29 January, 01:47
Martin Nevo
this is going to be awsome.
I am picking kits that are near perfect so I have fun.
but there are also people who pick not-so-perfect-kits like this Ta152 and they still have loads of fun!
GL 🙂
this is going to be awsome.
I am picking kits that are near perfect so I have fun.
but there are also people who pick not-so-perfect-kits like this Ta152 and they still have loads of fun!
GL 🙂
31 January, 13:12
Skyhiker
Well mostly I pick not-so-perfect-kits because I'm a cheap skate. I'd rather pay 6 euros than 40 for a kit. I do have some moderately priced kits and they are a lot faster and fun to make, but often I just have the need to challenge myself and see where my skill level is at.
Well mostly I pick not-so-perfect-kits because I'm a cheap skate. I'd rather pay 6 euros than 40 for a kit. I do have some moderately priced kits and they are a lot faster and fun to make, but often I just have the need to challenge myself and see where my skill level is at.
31 January, 17:56
Moreno Baruffini
@Skyhiker: I totally like your approach and I think you did a great start!
@Skyhiker: I totally like your approach and I think you did a great start!
31 January, 19:16
Martin Nevo
same here @Skyhiker, I really like the 6eur price point. so affordable. probably thats why I started to look into the 1/144 scale 🙂
same here @Skyhiker, I really like the 6eur price point. so affordable. probably thats why I started to look into the 1/144 scale 🙂
31 January, 19:58
Jennifer Franklin
Excellent work on the exhausts, and the cockpit is coming along nicely.
Excellent work on the exhausts, and the cockpit is coming along nicely.
2 February, 03:24
Skyhiker
I did a bit more today but I can't seem to get any images to upload. Anyone else having these problems?
I did a bit more today but I can't seem to get any images to upload. Anyone else having these problems?
2 February, 19:03
Treehugger
Looking at photo #17 I want to give a tip:
I would be a little careful keeping the roll of masking tape on the table. I like keeping them in a holder, or placed in a bag, to avoid the side of the roll picking up all kind of dirt.
Looking at photo #17 I want to give a tip:
I would be a little careful keeping the roll of masking tape on the table. I like keeping them in a holder, or placed in a bag, to avoid the side of the roll picking up all kind of dirt.
2 February, 19:10
Skyhiker
Yes, I keep my tapes in a bag but it doesn't seem to help as well as it should. I think I need a better bag. When I photograph things at this scale there is more dust than I realize.
Yes, I keep my tapes in a bag but it doesn't seem to help as well as it should. I think I need a better bag. When I photograph things at this scale there is more dust than I realize.
2 February, 19:18
Jennifer Franklin
I can finally upload my images again now, I was having problems too.
I can finally upload my images again now, I was having problems too.
2 February, 20:13
Skyhiker
Treehugger I cleaned my tape and got a new bag. Thanks for pointing that out. No need for fuzzy tape.
Treehugger I cleaned my tape and got a new bag. Thanks for pointing that out. No need for fuzzy tape.
2 February, 20:20
Skyhiker
I have to take a break and will be back in a week. I must say I am in love with this plane. It's really a beautiful design with those long wings. I can't wait to get back to it.
I have to take a break and will be back in a week. I must say I am in love with this plane. It's really a beautiful design with those long wings. I can't wait to get back to it.
8 February, 06:54
Guy Rump
I'm going to build this one from my stash this year, definitely following! 👍
I'm going to build this one from my stash this year, definitely following! 👍
8 February, 14:14
Skyhiker
The canopy was totally uneven and so I decided to do the risky thing and file it from the inside. Hopefully I didn't just ruin it.
The canopy was totally uneven and so I decided to do the risky thing and file it from the inside. Hopefully I didn't just ruin it.
2 March, 13:17
Trez Mackenzie
I have built 70s Tamiya kit - but that was a least workable. The base was there even though many errors. This 'kit' just seems like a waste of time. Like trying to make a dog poop look edible by putting a cherry on top.
If I saw this kit I would stamp it into the ground. Useless
I have built 70s Tamiya kit - but that was a least workable. The base was there even though many errors. This 'kit' just seems like a waste of time. Like trying to make a dog poop look edible by putting a cherry on top.
If I saw this kit I would stamp it into the ground. Useless
8 April, 20:15
Skyhiker
This kit has its flaws but nothing that can't be corrected with a little bit of skill. Are there more accurate kits out there that are easier to build - yes. But the modern trend of wanting perfect kits seems counter to the art of modeling. If you have ever built a model from a block of wood you wouldn't call this kit useless. Challenging or time consuming I can agree with but it is not crap.
This kit has its flaws but nothing that can't be corrected with a little bit of skill. Are there more accurate kits out there that are easier to build - yes. But the modern trend of wanting perfect kits seems counter to the art of modeling. If you have ever built a model from a block of wood you wouldn't call this kit useless. Challenging or time consuming I can agree with but it is not crap.
10 April, 08:09
Trez Mackenzie
I agree with your modern trend thesis - especially if you add in the AM factor. But I think there is a line to be crossed between the kit manufacturers chucking out a quick buck kit with no effort in a fancy box (my pet peeve - rebox) etc, and thereby throwing the burden on the modeller and on the other side 'great expectations' along with spewing out bundles of dollars on AM on an already close to perfect kit.
I suppose if you are saying the kit can be built into an accurate replica then the modifications and work are justified.
I do admit that scratch building is the purest form of scale modelling so it depends on one's 'Weltanschaaung' and philosophy.
Anyway it looks like you gave up on it which influenced my previous comment - in other words all that effort bore no fruit
I agree with your modern trend thesis - especially if you add in the AM factor. But I think there is a line to be crossed between the kit manufacturers chucking out a quick buck kit with no effort in a fancy box (my pet peeve - rebox) etc, and thereby throwing the burden on the modeller and on the other side 'great expectations' along with spewing out bundles of dollars on AM on an already close to perfect kit.
I suppose if you are saying the kit can be built into an accurate replica then the modifications and work are justified.
I do admit that scratch building is the purest form of scale modelling so it depends on one's 'Weltanschaaung' and philosophy.
Anyway it looks like you gave up on it which influenced my previous comment - in other words all that effort bore no fruit
10 April, 11:54
Skyhiker
I haven't given up yet. Sometimes life forces me to take breaks but I hope to get back into this one soon. I have to put a lot of tiny details in the cockpit next and I need the right head space for that. Kits like these take time and often I will start easier kits mid process to keep things flowing. I absolutely agree that reboxing old kits without a mold date is deceptive. Thankfully with this site we can look up the history and sometimes see the sprues before buying anything. I've only had one kit that I couldn't do anything with. I bought it for 20 bucks opened up and threw it directly in the trash. That was a Top Gun F/A-18 Hornet snap kit, which really was a piece of shit.
I haven't given up yet. Sometimes life forces me to take breaks but I hope to get back into this one soon. I have to put a lot of tiny details in the cockpit next and I need the right head space for that. Kits like these take time and often I will start easier kits mid process to keep things flowing. I absolutely agree that reboxing old kits without a mold date is deceptive. Thankfully with this site we can look up the history and sometimes see the sprues before buying anything. I've only had one kit that I couldn't do anything with. I bought it for 20 bucks opened up and threw it directly in the trash. That was a Top Gun F/A-18 Hornet snap kit, which really was a piece of shit.
10 April, 16:03
Trez Mackenzie
lol - hopefully I wont end up with one of those 'open kit open bin' models. I would reconsider throwing in loads of detail in that cockpit because none will be seen - it may be one of those more of a burden - but it is your show.
As I'm just getting into it again I bought several boxes of the 1/72 AZ joy packs - about 20 bucks - 3 kits in a box - although the Gustav set has no stencils the Emil set does but no decals - much easier to deal with. I am using them to practice some skills. (Will post on here soon)
Just to add they are about to bring out AZ Mustang Joy pack - I'm only into German aircraft and armour but it might be for you. I suspect they may bring out another later mustang set
lol - hopefully I wont end up with one of those 'open kit open bin' models. I would reconsider throwing in loads of detail in that cockpit because none will be seen - it may be one of those more of a burden - but it is your show.
As I'm just getting into it again I bought several boxes of the 1/72 AZ joy packs - about 20 bucks - 3 kits in a box - although the Gustav set has no stencils the Emil set does but no decals - much easier to deal with. I am using them to practice some skills. (Will post on here soon)
Just to add they are about to bring out AZ Mustang Joy pack - I'm only into German aircraft and armour but it might be for you. I suspect they may bring out another later mustang set
10 April, 17:59
Remco van Haren
Following. Really looking forward to the end result.
Especially since I built this kit myself last year. Although I didn't put so much effort and detail into it as you are doing.
Following. Really looking forward to the end result.
Especially since I built this kit myself last year. Although I didn't put so much effort and detail into it as you are doing.
10 April, 21:29
Skyhiker
Worked on the canopy and tried to figure out how the scratch built cockpit will fit into the body.
Worked on the canopy and tried to figure out how the scratch built cockpit will fit into the body.
2 May, 23:45
Trez Mackenzie
It's coming along!
From about halfway back on the underside there should be no join line - but forward of halfway you are good which makes things a little easier.
Just an idea but you can download the ZM instructions to get an idea?
It's coming along!
From about halfway back on the underside there should be no join line - but forward of halfway you are good which makes things a little easier.
Just an idea but you can download the ZM instructions to get an idea?
6 May, 10:13
Skyhiker
Trez your message is pretty cryptic. Are you talking about panel lines or internal wing structures? The last photo is just a dry fit. I haven't started with dealing with any panel lines yet. I've been working on the inside of the wing walls to make something that gives an impression of space for the wheels.
Trez your message is pretty cryptic. Are you talking about panel lines or internal wing structures? The last photo is just a dry fit. I haven't started with dealing with any panel lines yet. I've been working on the inside of the wing walls to make something that gives an impression of space for the wheels.
6 May, 11:45
Trez Mackenzie
Apologies - I meant the external join lines. I can see what you done - it looks good. I thought the ZM instructions would help as a guide
Apologies - I meant the external join lines. I can see what you done - it looks good. I thought the ZM instructions would help as a guide
6 May, 12:56
Skyhiker
Trez, thanks for your ideas. I'm using a lot of photos and the instructions from a 1:32 model to help figure out what is going on. This little model is a challenge to correct but I'm having fun pushing my skills and learning as I go.
Trez, thanks for your ideas. I'm using a lot of photos and the instructions from a 1:32 model to help figure out what is going on. This little model is a challenge to correct but I'm having fun pushing my skills and learning as I go.
6 May, 15:36
Skyhiker
I worked out most of the cockpit issues today. It's not perfect but I got it in there.
I worked out most of the cockpit issues today. It's not perfect but I got it in there.
15 May, 23:09
Skyhiker
Moreno, I'm glad you're liking it. This is kinda pushing my skills a bit. We'll see what happens in the end together.
Moreno, I'm glad you're liking it. This is kinda pushing my skills a bit. We'll see what happens in the end together.
15 May, 23:11
Trez Mackenzie
Don't worry too much about updates - things like that can cause one to rush. We ain't going away so take your time! 🫡👍
Don't worry too much about updates - things like that can cause one to rush. We ain't going away so take your time! 🫡👍
16 May, 00:34
Skyhiker
Getting this kit to accept a cockpit was like pounding a square peg through a round hole. I had to reshape the whole damn fuselage.
Getting this kit to accept a cockpit was like pounding a square peg through a round hole. I had to reshape the whole damn fuselage.
16 May, 03:35
Patrick Hagelstein
Whoah!!! Amazing what you did to that old tooling! Very cool to watch! 👍🏼
Whoah!!! Amazing what you did to that old tooling! Very cool to watch! 👍🏼
16 May, 15:20
Bruce Huxtable
Really liking what you're doing, Skyhiker, and learning lots too. Impressed with your skills 🙂
Really liking what you're doing, Skyhiker, and learning lots too. Impressed with your skills 🙂
16 May, 19:43
Skyhiker
Łukasz the shape of the hood is really off in the kit. The superglue is just material for me to try and sculpt into a better hood.
Łukasz the shape of the hood is really off in the kit. The superglue is just material for me to try and sculpt into a better hood.
16 May, 20:26
Skyhiker
No, It's just cheap super glue from a discount store that I poured right from the tube and hardened with accelerator.
No, It's just cheap super glue from a discount store that I poured right from the tube and hardened with accelerator.
16 May, 22:08
Skyhiker
Well the fine engraving blade I just bought broke within a day of use. Very frustrating.
Well the fine engraving blade I just bought broke within a day of use. Very frustrating.
23 May, 14:42
Skyhiker
Luckily I bought a .02 mm blade in addition to the .01 mm that broke. It will have to do even though I would prefer the lines to be a little bit thinner.
Luckily I bought a .02 mm blade in addition to the .01 mm that broke. It will have to do even though I would prefer the lines to be a little bit thinner.
23 May, 15:06
Patrick Hagelstein
Amazing progress! Once you go the route of updating such an old kit, there's no way back, is there?
Amazing progress! Once you go the route of updating such an old kit, there's no way back, is there?
24 May, 22:19
Skyhiker
Thanks Patrick, your right there is always more to discover and do. I'm having fun with it. Of course I have no idea what it will look like in the end. I'm spending far too many hours allowing myself to be lost in process. But if that's what it takes, why not?
Thanks Patrick, your right there is always more to discover and do. I'm having fun with it. Of course I have no idea what it will look like in the end. I'm spending far too many hours allowing myself to be lost in process. But if that's what it takes, why not?
24 May, 23:19
Skyhiker
It's amazing how every kit I look at of a FW Ta 152 H is different. All the photos of the original aircraft are so blurry that details are impossible to pick out, so I'm left with looking at kits and guessing which ones are correct.
It's amazing how every kit I look at of a FW Ta 152 H is different. All the photos of the original aircraft are so blurry that details are impossible to pick out, so I'm left with looking at kits and guessing which ones are correct.
26 May, 01:25
Skyhiker
Anyone out there with a book on the TA 152? I'm trying to figure out if the top of the flaps have a vertical line down the center of them or not. From underneath there is a line there but I am getting conflicting images of the top surface. Can anyone post a decent image?
Anyone out there with a book on the TA 152? I'm trying to figure out if the top of the flaps have a vertical line down the center of them or not. From underneath there is a line there but I am getting conflicting images of the top surface. Can anyone post a decent image?
28 May, 16:28
DerMattes
I looked through some of my books and picture collection. But to find even a picture of the Ta152 is rare. 🙁
I looked through some of my books and picture collection. But to find even a picture of the Ta152 is rare. 🙁
28 May, 17:06
Skyhiker
Thanks Mattes. There are a few decent books out there but they go for 80 Euros and I can't afford that. I doubt the library would have anything worth while. Maybe the model shop will let me look through one of their books but usually they are sealed in foil. Hopefully someone here has something. Getting panel lines correct is not so easy. Even worse are the rivets.
Thanks Mattes. There are a few decent books out there but they go for 80 Euros and I can't afford that. I doubt the library would have anything worth while. Maybe the model shop will let me look through one of their books but usually they are sealed in foil. Hopefully someone here has something. Getting panel lines correct is not so easy. Even worse are the rivets.
28 May, 17:49
Skyhiker
I found this image which clearly shows the flaps divide in two sections. Interestingly the sections are not even like the underside.
[img1]
I found this image which clearly shows the flaps divide in two sections. Interestingly the sections are not even like the underside.
[img1]
29 May, 05:48
DerMattes
Maybe this would be helpful? flugzeugclassic.de/f..hlands-bester-jaeger
I do not have the magazine, but kind of stumbled over the link 😉
Maybe this would be helpful? flugzeugclassic.de/f..hlands-bester-jaeger
I do not have the magazine, but kind of stumbled over the link 😉
31 May, 13:34
Skyhiker
Thanks Ben, this kit gets a bad rap. It's not as bad as people make it out to be. Of course I am putting a lot of work into it to make it better. But if its done straight out of the box it's not that bad. The backwards propeller is a stupid engineering mistake but that's an easy fix.
Thanks Ben, this kit gets a bad rap. It's not as bad as people make it out to be. Of course I am putting a lot of work into it to make it better. But if its done straight out of the box it's not that bad. The backwards propeller is a stupid engineering mistake but that's an easy fix.
31 May, 23:54
Skyhiker
Yeah, I was a little heavy handed, but it's not a problem. I just glued it back together. I prefer trenching and filling over trying to get the lines the exact depth overall and then accidentally sanding away lines. The only problem with using this method is the deep panel lines can make the model unstable in places if you are not careful. But in the end it should all work out.
Yeah, I was a little heavy handed, but it's not a problem. I just glued it back together. I prefer trenching and filling over trying to get the lines the exact depth overall and then accidentally sanding away lines. The only problem with using this method is the deep panel lines can make the model unstable in places if you are not careful. But in the end it should all work out.
7 June, 21:47
Skyhiker
I am slowly moving forward on the panel lines behind the scenes. This is the part I have to force my way through because I don't really enjoy it. But it is coming along and I could have some photos soon.
I am slowly moving forward on the panel lines behind the scenes. This is the part I have to force my way through because I don't really enjoy it. But it is coming along and I could have some photos soon.
2 July, 18:21
Skyhiker
Thank you Moreno, re-scribing is definitely the part that's the least fun for me too. Some days I have to force myself just to do one line. If you do that once a day eventually it gets done. But yeah, re-scribing sucks.
Thank you Moreno, re-scribing is definitely the part that's the least fun for me too. Some days I have to force myself just to do one line. If you do that once a day eventually it gets done. But yeah, re-scribing sucks.
6 July, 16:21
Skyhiker
Big step made with attaching the wings. It makes me feel like I am moving forward after all.
Big step made with attaching the wings. It makes me feel like I am moving forward after all.
7 July, 14:33
Pietro De Angelis
An impressive amount of work, your patience and skills are incredible, congrats!
An impressive amount of work, your patience and skills are incredible, congrats!
11 July, 20:02
Thomas Kolb
Wow, what an insane amount of work you put into this project! I am humbled by your perseverance and attention to detail!
Wow, what an insane amount of work you put into this project! I am humbled by your perseverance and attention to detail!
12 July, 03:34
Skyhiker
Thanks Thomas, I enjoy the process of trying to figure out how to do stuff. The model is just an added bonus in the end.
Thanks Thomas, I enjoy the process of trying to figure out how to do stuff. The model is just an added bonus in the end.
12 July, 13:20
Thor73
ønsker
ønsker
WWII IJN Battleship New Yamato Detail Parts (for Tamiya's new Yamato)
FlyHawk Model 1:350
FH350071 201x 12 July, 23:14
Ludvík Kružík
la til et nytt fotoalbum
la til et nytt fotoalbum
67 bilder
Avia BH-10, first production run - WIPNy: 12 July, 23:12 1:48
After the paint dried, I removed all the masking tapes. I still have to spray the lower surfaces of the plane with silve...
Prosjekt: Avia BH-10
37 1 June, 23:28
Ludvík Kružík
Good to see you, Alec. As you can guess, this is gonna be a big show. There's gonna be a lot of cutting, a lot of editing, and of course, I'll be scratching out new parts. At this point, I'm still planning the build process. But work on the model will soon be in full swing.
Good to see you, Alec. As you can guess, this is gonna be a big show. There's gonna be a lot of cutting, a lot of editing, and of course, I'll be scratching out new parts. At this point, I'm still planning the build process. But work on the model will soon be in full swing.
3 June, 22:57
Ludvík Kružík
Welcome, Pierre, I'm very pleased to see your interest. I hope you find my rebuilding interesting.
The manufacturer of the Avia BH.9 model states 1/48 scale on the box. Actually the model is made in a slightly smaller scale 1/50. I don't mind that in this case. The Avia BH.10 is very similar to the Avia BH.9, but because it is a single-seat aircraft, it is smaller overall than the Avia BH.9. . So even if I build a single seat Avia BH.10 in 1/48 scale, I will be scaling down the fuselage and wing parts from the kit. I have been comparing the fuselage and wing parts to a 1/48 scale drawing of the Avia BH.10 and wondering how to scale the parts down to fit the desired shape and size.
Welcome, Pierre, I'm very pleased to see your interest. I hope you find my rebuilding interesting.
The manufacturer of the Avia BH.9 model states 1/48 scale on the box. Actually the model is made in a slightly smaller scale 1/50. I don't mind that in this case. The Avia BH.10 is very similar to the Avia BH.9, but because it is a single-seat aircraft, it is smaller overall than the Avia BH.9. . So even if I build a single seat Avia BH.10 in 1/48 scale, I will be scaling down the fuselage and wing parts from the kit. I have been comparing the fuselage and wing parts to a 1/48 scale drawing of the Avia BH.10 and wondering how to scale the parts down to fit the desired shape and size.
4 June, 08:14
bughunter
Nice project! The BH-10 will fit nicely between your finished BH-9 and BH-11 👍
Nice project! The BH-10 will fit nicely between your finished BH-9 and BH-11 👍
4 June, 19:35
Ludvík Kružík
Frank, you make a good point. The Avia BH.10 will add to my collection of Avia BH series monoplanes from the 1920s. They are very interesting and modern aircraft for their time, if only because biplanes dominated the skies at that time.
Frank, you make a good point. The Avia BH.10 will add to my collection of Avia BH series monoplanes from the 1920s. They are very interesting and modern aircraft for their time, if only because biplanes dominated the skies at that time.
4 June, 22:19
bughunter
Successful reshaping of kit parts 👍
Not very much left of the kit, but it looks like that way needs less work compared to a full scratch build.
Successful reshaping of kit parts 👍
Not very much left of the kit, but it looks like that way needs less work compared to a full scratch build.
6 June, 18:31
Ludvík Kružík
That's right. Due to the great similarity of the fuselage and wings of both Avia's, it is easier to modify these parts than to produce completely new ones. Still, there will be a lot of work involved in building the model.
At the moment I have the basic parts roughly ready. I still have to work on them. I will have to do some puttying and sanding. And then fill in all the details.
That's right. Due to the great similarity of the fuselage and wings of both Avia's, it is easier to modify these parts than to produce completely new ones. Still, there will be a lot of work involved in building the model.
At the moment I have the basic parts roughly ready. I still have to work on them. I will have to do some puttying and sanding. And then fill in all the details.
7 June, 10:33
Alec K
Nice progress. Watch, KP will release their 1/72 kit in 48 just as you finish… 😉 😄
Nice progress. Watch, KP will release their 1/72 kit in 48 just as you finish… 😉 😄
7 June, 13:19
Ludvík Kružík
I'm not really worried about that. Even if it happens, I'm fine with it. Avia BH.10 in 1/72 scale is not very accurate. And if KP goes the route of enlarging parts of the 1/72nd scale model while making a 1/48th scale model (which I think is very likely), it will transfer all the errors of the original model to the new one. Plus, I really like these "crazy" rebuilds. It's a lot of fun for me. 😉
I'm not really worried about that. Even if it happens, I'm fine with it. Avia BH.10 in 1/72 scale is not very accurate. And if KP goes the route of enlarging parts of the 1/72nd scale model while making a 1/48th scale model (which I think is very likely), it will transfer all the errors of the original model to the new one. Plus, I really like these "crazy" rebuilds. It's a lot of fun for me. 😉
7 June, 14:23
Alec K
I fully agree, scratch builds and conversions are a lot of fun. I'll have to compare the KP kit to drawings before starting mine 👍
I fully agree, scratch builds and conversions are a lot of fun. I'll have to compare the KP kit to drawings before starting mine 👍
7 June, 19:51
Ludvík Kružík
Alec, before building a model you have to choose which machine you want to build. I'm building a first production run machine, but KP's 1/72 scale kit is a second production run machine. Otherwise there were machines with special modifications. And be careful which drawing you want to use. Some drawings are not very accurate (for example the drawing from Modeler 7/1986).
I have described the basic differences between the first and second production series machines in the attached photo.
Alec, before building a model you have to choose which machine you want to build. I'm building a first production run machine, but KP's 1/72 scale kit is a second production run machine. Otherwise there were machines with special modifications. And be careful which drawing you want to use. Some drawings are not very accurate (for example the drawing from Modeler 7/1986).
I have described the basic differences between the first and second production series machines in the attached photo.
9 June, 10:12
Ludvík Kružík
Alec, you can find a lot of useful information about Avia BH.10 on Czech Modelforum in Pavel Kloucek's overviews.
Information about machines from the first production run can be found here: modelforum.cz/viewtopic.php?f=310&t=143236
And information about the machines of the second production series is here: modelforum.cz/viewtopic.php?f=310&t=143254
A lot of interesting information about the Avia aircraft designed by Benes and Hajn is in this book: nasevojsko.eu/nasevo..onstrukce-Benes-Hajn
I sent you a PM about the drawings.
Alec, you can find a lot of useful information about Avia BH.10 on Czech Modelforum in Pavel Kloucek's overviews.
Information about machines from the first production run can be found here: modelforum.cz/viewtopic.php?f=310&t=143236
And information about the machines of the second production series is here: modelforum.cz/viewtopic.php?f=310&t=143254
A lot of interesting information about the Avia aircraft designed by Benes and Hajn is in this book: nasevojsko.eu/nasevo..onstrukce-Benes-Hajn
I sent you a PM about the drawings.
9 June, 17:11
Ludvík Kružík
Unfortunately I only have one period photo of the cockpit, which shows the instrument panel and the right side of the cockpit.
I'm working from the drawing to create the controls and instruments on the left side of the cockpit and floor, with the help of photos of the Avie BH.11 cockpit.
Since the Avie BH.9, 10 and 11 have the same engine and very similar construction, I think most of the cockpit controls were designed very similarly, if not identically.
Unfortunately I only have one period photo of the cockpit, which shows the instrument panel and the right side of the cockpit.
I'm working from the drawing to create the controls and instruments on the left side of the cockpit and floor, with the help of photos of the Avie BH.11 cockpit.
Since the Avie BH.9, 10 and 11 have the same engine and very similar construction, I think most of the cockpit controls were designed very similarly, if not identically.
14 June, 21:52
Ludvík Kružík
Welcome my friends! Thank you for your interest and popdoru. I really appreciate it.
Welcome my friends! Thank you for your interest and popdoru. I really appreciate it.
15 June, 21:53
Ludvík Kružík
I finished the cockpit. After gluing the starboard side to the cockpit, I'll mount the cockpit to the fuselage.
I finished the cockpit. After gluing the starboard side to the cockpit, I'll mount the cockpit to the fuselage.
15 June, 22:09
Alec K
Your prop effort beats mine. I tried with sandwitched colored paper infused with resin but needed a painted color overlay. I need to try with correct colored card stock next time.
Your prop effort beats mine. I tried with sandwitched colored paper infused with resin but needed a painted color overlay. I need to try with correct colored card stock next time.
16 June, 01:20
Ludvík Kružík
Making a propeller out of coloured cardboard was an experiment for me. I wondered if it would work.
Making a propeller out of coloured cardboard was an experiment for me. I wondered if it would work.
16 June, 23:43
Ludvík Kružík
I finished making the cockpit. Now I'm going to glue the bottom of the fuselage and then putty and sand the fuselage.
I finished making the cockpit. Now I'm going to glue the bottom of the fuselage and then putty and sand the fuselage.
16 June, 23:54
Ludvík Kružík
It was time to puttying and sanding. We'll see how many times I have to repeat this cycle.
It was time to puttying and sanding. We'll see how many times I have to repeat this cycle.
19 June, 21:47
Ludvík Kružík
Villiers, welcome! Good to see you again.
This aeroplane is very simple and there are very few small details on it. But the few that are on it, I'll be sure to pay attention to. 😉
Bughunter,
maybe your plan to buy shares in the putty maker will pay off. At least in my case the putty maker made a profit 😄.
I know the fuselage doesn't look good with a heavy coat of putty. But the hull needed that layer of putty on the bow. I had to fill in all the joints and minor unevenness. There won't be much putty left on the hull after sanding, but since the putty shrinks as it dries, it's hard to tell ahead of time where more putty is needed and where maybe not. In this case, more is better.
Villiers, welcome! Good to see you again.
This aeroplane is very simple and there are very few small details on it. But the few that are on it, I'll be sure to pay attention to. 😉
Bughunter,
maybe your plan to buy shares in the putty maker will pay off. At least in my case the putty maker made a profit 😄.
I know the fuselage doesn't look good with a heavy coat of putty. But the hull needed that layer of putty on the bow. I had to fill in all the joints and minor unevenness. There won't be much putty left on the hull after sanding, but since the putty shrinks as it dries, it's hard to tell ahead of time where more putty is needed and where maybe not. In this case, more is better.
20 June, 10:15
Ludvík Kružík
The fuselage, wings and tail surfaces are ready for minor detailing. In the end I just needed one rough puttying, sanding, spraying surfacer, one fine puttying of minor defects, sanding again and final surfacer.
The fuselage, wings and tail surfaces are ready for minor detailing. In the end I just needed one rough puttying, sanding, spraying surfacer, one fine puttying of minor defects, sanding again and final surfacer.
21 June, 16:34
TH SCALE MODELS (Thomas Haberl)
Amazing how this turnded out till now Ludvik! Biggest respect for this special project and efforts you make on it. Looking forward to the next steps 🤩
Amazing how this turnded out till now Ludvik! Biggest respect for this special project and efforts you make on it. Looking forward to the next steps 🤩
22 June, 11:08
Ludvík Kružík
Mates, thank you all!
It's great to have you on board. Your support means a lot to me.
Mates, thank you all!
It's great to have you on board. Your support means a lot to me.
22 June, 16:40
Ludvík Kružík
After a short vacation I returned to building the Avia. I haven't had much time to build it yet.
I taped the tail surfaces with masking tape so I could spray thin strips of surfacer on the ribs.
To indicate the slight sagging of the canvas on the wing surfaces that were only covered with canvas, I started scraping these surfaces very gently with a round-bladed scalpel. Once I had completed this operation on both wings, it was my turn to cover them with masking tape so that I could spray strips of surfacer on the wing ribs.
I'll add photos of the work in progress next time.
After a short vacation I returned to building the Avia. I haven't had much time to build it yet.
I taped the tail surfaces with masking tape so I could spray thin strips of surfacer on the ribs.
To indicate the slight sagging of the canvas on the wing surfaces that were only covered with canvas, I started scraping these surfaces very gently with a round-bladed scalpel. Once I had completed this operation on both wings, it was my turn to cover them with masking tape so that I could spray strips of surfacer on the wing ribs.
I'll add photos of the work in progress next time.
29 June, 10:35
Ludvík Kružík
I'm slowly resuming my work. I've sprayed the rib bands on the wings and added some minor detailing to the left side of the fuselage.
I'm slowly resuming my work. I've sprayed the rib bands on the wings and added some minor detailing to the left side of the fuselage.
3 July, 22:32
Ludvík Kružík
The top and side surfaces of the Avia are sprayed with the first of three camouflage colours.
The top and side surfaces of the Avia are sprayed with the first of three camouflage colours.
8 July, 21:12
Ludvík Kružík
Moreno Baruffini, thank you, I appreciate it.
Alec, when this Avia is finished, it will complete my collection of Avia BH-3, Avia BH-9 and Avia BH-11 monoplanes from Benes and Hajn constructors.
Moreno Baruffini, thank you, I appreciate it.
Alec, when this Avia is finished, it will complete my collection of Avia BH-3, Avia BH-9 and Avia BH-11 monoplanes from Benes and Hajn constructors.
9 July, 22:23
Ludvík Kružík
Villiers thank you for your interest.
Due to the summer season and its associated activities and the occasional babysitting of my 15 month old grandson, I have less time to build the model. Progress will be slower.
Villiers thank you for your interest.
Due to the summer season and its associated activities and the occasional babysitting of my 15 month old grandson, I have less time to build the model. Progress will be slower.
10 July, 07:36
Sy Bar
la til et nytt fotoalbum
la til et nytt fotoalbum
15 bilder
AH-1G Cobra VietnamNy: 12 July, 23:07 1:48
Once the canopy is attached the unmistakable Cobra appears
Prosjekt: AH-1G Cobra Vietnam
8 7 July, 21:41
Sy Bar
A builds of firsts, my first Helicopter and first use of 3D decals. Turns out the kit was originally a HobbyBoss kit and looks great nice details and combination of fine panel lines and rivets where need, I have high hopes for this build. 🤞
A builds of firsts, my first Helicopter and first use of 3D decals. Turns out the kit was originally a HobbyBoss kit and looks great nice details and combination of fine panel lines and rivets where need, I have high hopes for this build. 🤞
7 July, 21:47
Sy Bar
Cheers #Villiers, the 3d decals are fantastic and really elevate the tubs to a new level.
First real issue with the kit is the fit of the main body, it does not want to join easily and I can find a cause but most can be fixed by gluing a small section at a time and working down the body.
However the bottom section is far too narrow for the kit bottom part, creating large hangovers. This may suggest the bandy has a warp in it but this is modelling not assembly.
I've added a stretcher of sprue to force the side apart hopefully this will help and not cause more issues later.
Cheers #Villiers, the 3d decals are fantastic and really elevate the tubs to a new level.
First real issue with the kit is the fit of the main body, it does not want to join easily and I can find a cause but most can be fixed by gluing a small section at a time and working down the body.
However the bottom section is far too narrow for the kit bottom part, creating large hangovers. This may suggest the bandy has a warp in it but this is modelling not assembly.
I've added a stretcher of sprue to force the side apart hopefully this will help and not cause more issues later.
10 July, 08:48
Sy Bar
Another sort of issue although a little troublesome rather than true issue.
The instruction contain a couple of templates for both inner and outer glass masks (a great idea I wish more kits had). However they are way under scale, I resorted to old skool and used Tamiya tape and fresh blade with bright light behind (phone light 😁) and cut my own.
While right this it occurs to me they may be 1/72 scale and were not rescaled to 1/48 will check later.
Another sort of issue although a little troublesome rather than true issue.
The instruction contain a couple of templates for both inner and outer glass masks (a great idea I wish more kits had). However they are way under scale, I resorted to old skool and used Tamiya tape and fresh blade with bright light behind (phone light 😁) and cut my own.
While right this it occurs to me they may be 1/72 scale and were not rescaled to 1/48 will check later.
10 July, 20:06
Sy Bar
Great spot #Jens J it is indeed Special Hobby plastic, my apologies to both Special Hobby and HobbyBoss for the confusion.
Just completed a HobbyBoss and had them on my mind, this would be an excuse if the sprues where not so well labeled and on the Quinta 3D decals 🤪
Great spot #Jens J it is indeed Special Hobby plastic, my apologies to both Special Hobby and HobbyBoss for the confusion.
Just completed a HobbyBoss and had them on my mind, this would be an excuse if the sprues where not so well labeled and on the Quinta 3D decals 🤪
11 July, 06:29
Doug H
ønsker
ønsker
Sd.Kfz. 234/4 Pz. Spähwagen with Full Interior
Rye Field Model (RFM) 1:35
RM-5118 (RM5118) 2024* Nye deler 12 July, 23:04
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo