Nyhetsstrøm
Kyrylo Shlyayev
la til et nytt fotoalbum
la til et nytt fotoalbum
3 6 October, 07:13
Spanjaard
i am sure in reality looks better than in pictures, that is the problem of zoom in 1/144 😉 looks good from here 🙂
i am sure in reality looks better than in pictures, that is the problem of zoom in 1/144 😉 looks good from here 🙂
6 October, 08:40
MS K
merket denne som i bestilling
merket denne som i bestilling
Peugeot 306 Maxi EVO2 1998 Monte Carlo Rally Class Winner
Beemax Model Kits 1:24
BX24026 2022 Nye deler 6 October, 08:38
Kike Alés
ønsker
ønsker
Bravo MIG Killers, Part One Redux F-4B Phantoms of the Vietnam War
Furball Aero-Design 1:48
48-011 2022 Ny boks 6 October, 08:35
Bozzer
la til et nytt fotoalbum
la til et nytt fotoalbum
4 11 August, 08:01
Bozzer
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
I'll get some more pictures up, later today, but basically this is something that I've always wanted and finally got the chance to have.
I printed this myself, after purchasing the files. I have to admit, these are bloody amazing files. I had a few hiccups during printing, and this was narrowed down to a corrupt flash drive. I can't wait to get this one done and on the shelf.
11 August, 08:07
Bozzer
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
I shall, Martin. Just need to get back in the cave and take some. I can tell you that the chassis is very good. It lines up almost flawless.
2 October, 07:45
Bozzer
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
@martin. I bought some ABS-like, transparent resin, so I could use it for clear parts. What you see is, 2mm thick clear. I've not tried it any thinner, but for my taste, it's not good enough to use as glass for cab windows, etc? However, I'll give it a try, soon, just for a sample. Even i can be wrong, sometimes?
5 October, 23:24
Martin Oostrom
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
You're not wrong, you tried something new that didn't work out as hoped. No shame in that!
6 October, 07:16
Nigel Chapman
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
How have I missed this?
Wow Bozzer that is awesome. I agree with Martin it does look strange in that colour. At first glance I thought it was bread dough!
6 October, 08:34
Kike Alés
merket denne som i bestilling
merket denne som i bestilling
USMC Rhinos United States Marine Corps F-4B/J Phantom IIs of the Vietnam Era
Furball Aero-Design 1:48
48-012 2013 New tool 6 October, 08:34
David R. Meizoso
la til et nytt fotoalbum
la til et nytt fotoalbum
40 16 January 2022, 20:01
David R. Meizoso
Thank you, guys! I'll update this album with some WIP pics, as soon as my PC comes back from hospital.
Thank you, guys! I'll update this album with some WIP pics, as soon as my PC comes back from hospital.
16 January 2022, 20:40
David R. Meizoso
Thanks, mates! Cuajete: yes they are. They're a little bit short of stencils but the principal ones are there.
Thanks, mates! Cuajete: yes they are. They're a little bit short of stencils but the principal ones are there.
18 January 2022, 21:03
David R. Meizoso
Thanks everybody for your kind words and likes also, I really appreciate it! I just uploaded some WIP pictures as promised. This was a very demanding project and I was so into it that forgot to take pictures of many important steps... Happens to me all the time, not only when modelling!
Thanks everybody for your kind words and likes also, I really appreciate it! I just uploaded some WIP pictures as promised. This was a very demanding project and I was so into it that forgot to take pictures of many important steps... Happens to me all the time, not only when modelling!
20 January 2022, 10:22
Spanjaard
very demanding, but really beautiful result. beautiful cockpit! great job David!
very demanding, but really beautiful result. beautiful cockpit! great job David!
20 January 2022, 10:28
Chan Li
Haha man, after I saw this I almost want to quit my own build of hornet, this is simply masterpiece, it looks like 48 scale.
Haha man, after I saw this I almost want to quit my own build of hornet, this is simply masterpiece, it looks like 48 scale.
29 January 2022, 12:13
David R. Meizoso
Thanks, Chan! I really hope you stick with the "almost" and don't quit your superbug!
Thanks, Chan! I really hope you stick with the "almost" and don't quit your superbug!
29 January 2022, 12:53
Rui S
@ Chan, this should be inspiring, not the contrary. At least to me, scalemates masters motivate me to try to achieve the Next level. I'm with David.
@ Chan, this should be inspiring, not the contrary. At least to me, scalemates masters motivate me to try to achieve the Next level. I'm with David.
29 January 2022, 13:06
Bozzer
eier nå
eier nå
5 October, 23:32
Nigel Chapman
Yep found it. Well done. It's amazing what you can find but those days are getting fewer
Yep found it. Well done. It's amazing what you can find but those days are getting fewer
6 October, 08:30
Dmitri Belousov
ønsker
ønsker
Red Army Men #4 Summer 1943-45 (2 Fig. 6 Heads)
Tank 1:35
T35065 6 October, 08:27
Curatorm
ønsker
ønsker
Last War of the Superfortresses MiG-15 versus B-29 in the Korean War 1950-53
Asia@War Nr. 52
Leonid Krylov, Yuriy Tepsurkaev
2024 6 October, 08:27
Ronald
markerte denne som til salgs/byttbar
markerte denne som til salgs/byttbar
29 September, 08:32
Frank Morano
Un peut chère à 70 € 104.00 can
Plus shipping 28 € 42.00 can
J'ai payé hier pour le F4E Late 100.00 can plus 24.33 shipping.
C'est le nouveau kit.
L'échange aide pas de ce temps çi.
À 50€ plus 28 € je serais plus avantageux.
75.00 ca plus 42.00 can shipping je suis preneur.
Merçi pour ton approche.
Bonne fin journée.
Un peut chère à 70 € 104.00 can
Plus shipping 28 € 42.00 can
J'ai payé hier pour le F4E Late 100.00 can plus 24.33 shipping.
C'est le nouveau kit.
L'échange aide pas de ce temps çi.
À 50€ plus 28 € je serais plus avantageux.
75.00 ca plus 42.00 can shipping je suis preneur.
Merçi pour ton approche.
Bonne fin journée.
4 October, 06:25
Ronald
Sorry, my French isn't that great. Is it possible to add your comment in English?
Sorry, my French isn't that great. Is it possible to add your comment in English?
4 October, 13:58
Frank Morano
I paid yesterday for the F4E Late 100.00 can plus 24.33 shipping. This is the new kit. The exchange doesn't help at this time. At €50 plus €28 I would be more advantageous. 75.00 ca plus 42.00 can shipping I am a taker. Thank you for your approach. Have a good end of the day.
I paid yesterday for the F4E Late 100.00 can plus 24.33 shipping. This is the new kit. The exchange doesn't help at this time. At €50 plus €28 I would be more advantageous. 75.00 ca plus 42.00 can shipping I am a taker. Thank you for your approach. Have a good end of the day.
6 October, 08:25
Soeren R.
merket denne som i bestilling
merket denne som i bestilling
AAM-3 missiles (4 pcs) (F-4EJ, F-2, F-15J) (3D Printed)
ResKit 1:48
RS48-0423 6 October, 08:21
David R. Meizoso
la til et nytt fotoalbum
la til et nytt fotoalbum
58 28 April 2022, 14:38
Spanjaard
That home made corrugated aluminium looks amazing.
About duplicating parts, I have just started to use blue staff to make reusable moulds, works like a charm
That home made corrugated aluminium looks amazing.
About duplicating parts, I have just started to use blue staff to make reusable moulds, works like a charm
28 April 2022, 18:53
Robert Podkoński
I have been so happy to see her re-released. And I bought her at once, of course 😉 I will watch your build report with utmost interest and pleasure!
I have been so happy to see her re-released. And I bought her at once, of course 😉 I will watch your build report with utmost interest and pleasure!
28 April 2022, 19:00
Lochsa River
sittin in....this is in the stash....very interested to see your work...
sittin in....this is in the stash....very interested to see your work...
28 April 2022, 19:48
David R. Meizoso
Welcome aboard everyone!
Thanks for the tip, Spanjaard. Looks like something worth checking out!
Welcome aboard everyone!
Thanks for the tip, Spanjaard. Looks like something worth checking out!
28 April 2022, 21:40
David R. Meizoso
Spanjaard: I used 2 component silicone for the moulds (Feroca Silastic 3483) and a resin from Smooth On (Smooth-Cast 300) that I found at a FX store nearby. They're not cheap, but the result turned out great!
Spanjaard: I used 2 component silicone for the moulds (Feroca Silastic 3483) and a resin from Smooth On (Smooth-Cast 300) that I found at a FX store nearby. They're not cheap, but the result turned out great!
10 May 2022, 13:19
Michael Kohl
I like your approach(es). Lokking interesting and entertaining. I am in.
I like your approach(es). Lokking interesting and entertaining. I am in.
10 May 2022, 15:10
bughunter
Not my scale, but nice build 👍
Soldering is a very important technique for me (as I soldered the Eduard Stripdown kit 😉 ). If possible fix the parts somehow, so that the can't move during the cool down phase. The rest is training and timing.
The aluminium embossing technique is great!
Not my scale, but nice build 👍
Soldering is a very important technique for me (as I soldered the Eduard Stripdown kit 😉 ). If possible fix the parts somehow, so that the can't move during the cool down phase. The rest is training and timing.
The aluminium embossing technique is great!
12 May 2022, 18:58
David R. Meizoso
Thank you, Michael, Alec and Bughunter!
Bughunter: yes, I found fixing the pieces to be very tricky, given the small diameter of the wire used. For my trials I managed to get a decent result somehow with balsa wood "bed" (I cut out a hole under the welding point to let the tin flow) masking tape and blue tac. Main issue for me by now is getting used to the behaviour of the tin, sometimes it flows ok, but not always. So still a long way to go! I really appreciate your advice btw.
Thank you, Michael, Alec and Bughunter!
Bughunter: yes, I found fixing the pieces to be very tricky, given the small diameter of the wire used. For my trials I managed to get a decent result somehow with balsa wood "bed" (I cut out a hole under the welding point to let the tin flow) masking tape and blue tac. Main issue for me by now is getting used to the behaviour of the tin, sometimes it flows ok, but not always. So still a long way to go! I really appreciate your advice btw.
12 May 2022, 21:38
William Adair
Great work! I really like the embossing technique. I have been wondering how best to tackle this kit too 🙂
Great work! I really like the embossing technique. I have been wondering how best to tackle this kit too 🙂
17 May 2022, 11:08
David R. Meizoso
Thanks, F_IV! I'm currently working on the interior, but have some trouble copying the seats. The first two came out perfect, but all the following ones have bubbles or aren't properly cured...
Thanks, F_IV! I'm currently working on the interior, but have some trouble copying the seats. The first two came out perfect, but all the following ones have bubbles or aren't properly cured...
17 May 2022, 15:53
Łukasz Gliński
Inceredible project! The alu hint is great - I tried similar thing some time ago, but never thought of using screws, thx 👍
Inceredible project! The alu hint is great - I tried similar thing some time ago, but never thought of using screws, thx 👍
18 May 2022, 11:14
Antoine Meylan
Projet intéressant! et le début est très prometteur, avec plein d'essai! Je suis.
Projet intéressant! et le début est très prometteur, avec plein d'essai! Je suis.
3 June 2022, 06:54
Robert Podkoński
That's going to be a masterpiece! Interior looks fantastic already!
That's going to be a masterpiece! Interior looks fantastic already!
3 June 2022, 07:50
David R. Meizoso
Thanks, guys. Doing my best here, it's my first 1/144. I'll also replace the kit's wing struts with wooden ones following Bughunter's path. Since they're really big on the real thing I think it can be done in this scale. Got one done already and it looks great, I just wish there were not so many.
Thanks, guys. Doing my best here, it's my first 1/144. I'll also replace the kit's wing struts with wooden ones following Bughunter's path. Since they're really big on the real thing I think it can be done in this scale. Got one done already and it looks great, I just wish there were not so many.
3 June 2022, 08:32
Bernhard Schrock
Corrugated skin and detailing in the cockpit & interior in 1:144! Top work. A front seat please!
Corrugated skin and detailing in the cockpit & interior in 1:144! Top work. A front seat please!
23 June 2022, 10:52
David R. Meizoso
Thanks, Alec and Bernhard! All the 19 passenger seats are ready for paint at last.
Thanks, Alec and Bernhard! All the 19 passenger seats are ready for paint at last.
23 June 2022, 13:10
David R. Meizoso
I wish some Ryanair CEO watching this may reconsider their comfort standards.
I wish some Ryanair CEO watching this may reconsider their comfort standards.
14 July 2022, 10:17
Michael Kohl
😉 I am sure they do - as soon as we as passengers consider paying a similar share of our income for a ticket as the passengers of those days had to.
😉 I am sure they do - as soon as we as passengers consider paying a similar share of our income for a ticket as the passengers of those days had to.
14 July 2022, 10:33
David R. Meizoso
Ben: OK, I see your point. Somehow I don't feel bad about those 30's travellers who could afford the tickets, but I do about companies trying to squeeze as many people as possible on modern planes.
Ben: OK, I see your point. Somehow I don't feel bad about those 30's travellers who could afford the tickets, but I do about companies trying to squeeze as many people as possible on modern planes.
14 July 2022, 22:28
David R. Meizoso
Thank you, friends! Due to Covid, I can't use proper workbench this week, so I started some easier projects on my bedside table. Less is more!
Thank you, friends! Due to Covid, I can't use proper workbench this week, so I started some easier projects on my bedside table. Less is more!
23 July 2022, 09:00
Bernd Grün
Impressive project with maximum effort. Outstanding result, David! 👍 I'll Take a seat.
Impressive project with maximum effort. Outstanding result, David! 👍 I'll Take a seat.
10 November 2022, 15:39
Zbynek Honzik
Where did this interesting project go? It would be a shame to give up, David!
Where did this interesting project go? It would be a shame to give up, David!
5 October, 15:47
David R. Meizoso
Hallo, Zbynek. It's indeed a shame that all my projects are on hold for the moment due to my new job. I hope I can find time and energy again soon. Thanks for stopping by!
Hallo, Zbynek. It's indeed a shame that all my projects are on hold for the moment due to my new job. I hope I can find time and energy again soon. Thanks for stopping by!
6 October, 08:05
Zbynek Honzik
I understand that very well, David. Due to my work obligations and the somewhat erratic nature of my profession, my projects also take many years to complete. Anyway, my fingers are crossed that your new job stabilizes and you can get back to your modeling projects. I'd really like to see them finished. I believe that extraordinary models could emerge.
Good luck!
I understand that very well, David. Due to my work obligations and the somewhat erratic nature of my profession, my projects also take many years to complete. Anyway, my fingers are crossed that your new job stabilizes and you can get back to your modeling projects. I'd really like to see them finished. I believe that extraordinary models could emerge.
Good luck!
6 October, 08:17
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo