Nyhetsstrøm

Chris T. An
This is the first time for me to tackle a complete resin kit. And when I look at the individual parts, it will be a real challenge. There is an extreme amount of rework needed on each part. Hope I can get it to work.

Finn
Best of luck, it will be interesting to follow

Michael Kohl
I am in too

Robert Podkoński
I will watch with pleasure and interest too.

Alex K
A 3D-printed PZL Dromader???!!! Following for sure!! (The Grand Models cast-resin kit is perhaps above my skills - and I still wait for the Karaya injection one...). Your ag-aircraft & ground equipment dio will turn... monumental! 👍

Marcel Klemmer
Very interesting project👍 I am in

Villiers de Vos
Very nice progress on an unusual subject.

Chris T. An
Thank you all for watching. Alex, I also saw the Grand Models kit for the M18, but I was frightened from some build reviews, there is a lot of rework to do on that kits. I have now the same or a bit more work, but I got the 3D file for free from Thingiverse.

I am really not a Pro in sratch building but I will try to engrave some panel lines and add some more greeblies to the plane. The 3D file is very poor in details.

Alex K
Nice progress! 👍

Robert Podkoński
Fantastic Dromader! (I wish I had one... I have no access to 3d printing, alas...😭 )

Chris T. An
Robert, you can have a look to the Grand Models resin kits. I am much more disappointed that there is no kit in 1:72 and no 3D file of a PZL 106 Kruk. I would spend some money on that because it would fit perfect to the Dromader and Cmelák.

Robert Podkoński
Actually, that is something that makes me angry too - I would love to see (and buy) decent kits of "Wilga" and "Kruk" (not mentioning PZL M-15 "Belphegor" 😉 )... but apparently no Polish manufacturers are interested in preparing these.

Alex K
Guys... let's look a bit at the bright side: who would have thought a few years ago that one day (today!) there would be kits of the Cmelak, the Dromader, the Grumman AgCat (in both 1:72 & 1:48!!!), the Piper Pawnee?! Some are short-run, some are cast-resin, some are 3D-files-to print - nevertheless, something is slowly moving towards that direction! So, yes, I do hope too there will be someday a Kruk available in 1:72 or a Belphegor! And your buys of such kits and your modelling work proves that there's some interest in such topics! Keep it up! 👍

Robert Podkoński
You're right, Alex 🙂 "Always look on the bright side of life..." 😉

Robert Podkoński
I am afraid there is a spelling error on the decals, Chris... I see "Dromedar" instead of "Dromader"... The plane looks awesome!

Chris T. An
Robert, I can understand that it is confusing, but in the GDR, "Dromedar" was actually used. This is the German translation of the word. Feel free to search for pictures of it, here would be an example: [img1]

Robert Podkoński
I have not known about that, sorry Chris... That's really interesting.

Alex K
Nice trivia... and as Robert said: it looks awesome!

Bernhard Schrock
Dromader: An outstanding result from such a simple kit!

Neuling
Everything top notch here! But what about the excavator? May a combined diorama?

Chris T. An
The excavator is still coming. I haven't dared to go any further yet. Let's see, maybe I'll get motivated again in the fall/winter. 😉

Neuling
👍

Michael Kohl
Very well done Dromedar. Anxious about the excavator.

Villiers de Vos
Fantastic work on the crop duster.

Chris T. An
It is not easy to find out with which lettering the excavator was delivered in the color used in the respective year of construction. I'll have to see which decals I print out.

Ben M
What a great project! You got an amazing result with the 3d printed aircraft.

Mark Sherwood
That's excellent, I operate a CAT M3050 Material Handler at work, very similar. Weathering on the grabs are spot on. 🥸👍

Spanjaard
that is looking amazing, and it is not yet finished.....

gorby
Fantastic work so far.

Chris T. An
Thank you guys. So now I can set all the small projects into place for the final diorama. Think I will need one more figure to show an excavator operator.

Łukasz Gliński
That excavator looks insanely real 👍

Michael Kohl
Just saw one cycling in the Erzgebirge and can only agree with Lukasz. Weathering is spot on.

Finn
Awesome!

Robert Podkoński
Fantastic job!

Bernhard Pethe
Genau wie ich den T174 gekannt habe. Super! 👍

Chris T. An
So I finally finished the complete diorama. Hope you like it.

Ben M
It's wonderful!

Robert Podkoński
Awesome job! Chapeau bas!

gorby
WOW, stunning dio!
Is the digger going to grab the Trabant? 😄

Alex K
Oh my... Deepest respects!

Spanjaard
fantastic!!!

Michael Kohl
Chris, maybe you mentioned it somewhere, but where do figures and Trabant come from? Maybe you can even add those to the project's kit list.

Guy Rump
Very impressive and unusual dio. 👍

Chris T. An
Thanks to all of you, really appreciate it. Danke!

Jan Janssen
Unusual subject wonder how it builds up, #following

Mr D
Thanks Jan 👍will update through build.
It's from the 1990's

Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??

David R. Meizoso
Beautiful subject, I'm also in!

Guy Rump
Following. 👍

Mr D
Thanks Grumpy Guy 👍👍 bit of a different one..

Skyhiker
Very nice

Ben M
👀

Mr D
Ben👋😀👍

Neil
Really nice work Mr D 💯 Following 👍

Mr D
Great Neil, 👋😀.... Thanks

J35J
Great progress! Following👍🏻

Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.

Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍

Michael Kohl
Following

Mr D
Thanks Michael 👋😀👍
Good to have you along ✈️

Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.

Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍

Mr D
Airliner Was the Tu-134

Guy Rump
Looking good, following. 👍

Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.

Mr D
Thanks to Everyone who has liked n taken an interest 👋😃👍.. Appreciate it 👍

Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.

Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍

Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.

Edouard Carr
GG. Now added to my shopping list along with watch pins 😉

gorby
Looks like an interesting build.

Mr D
Hi Edouard 👋..yes 🤣 lm on 12 model with it and never had anything come loose.
Mike👋.... No mention neither! I've purchased some more Soviet stars now, may have some numbers leftover from others project's.
Gorby, Thanks buddy 👍

Christian W
This is a quite interessting plane you're building! I like the shape of the wings. Pretty good build and pictures.

Mr D
@ Christian W.
Thanks buddy 🙂👍
Yes it a bit different, yes has nice gull-wings.
It's a trip down memory lane for me... I slapped one together back in 1991 as a kid.
Thanks for the interest.... I like seeing people's build processes n history....so doing the same.👍👍

Dave Flitton
Looking good so far

Mr D
Thanks Dave.
Will be prepping for paint very soon... Stay tuned.
😁👍

Zbynek Honzik
I'm anxiously waiting at the monitor for the paint job! Fingers crossed!

Christian W
Mr D ... 🙂 I like too to see, how much progress my skills during the last 10 years did. Good for me is, that I own most of my model kits since I was a kid. My first plane, car and truck are still in my shelf or boxes.
Because I stumbled somehow over your wip, I checked the history of the kit. It is rally unbelievble, that those engine openings are on the bottom of the motors. Amazing. I wouldn't notice that without your hint.

Lorraine Lin
Cannot wait to see the result. Your work reminds me of my first kit, it was a Victor bomber by Matchbox (They had a JV factory in Shanghai at that time). But hard find it in the market now.

Mr D
Hi Lorraine 👋.
Glad your interested 👍 there are X2 colour schemes for the be-6 the Soviet green or the Chinese blue, l liked the blue version but could only find suitable replacement decals for Soviet.
My first kit was the Matchbox Electric lightning,.... Built it with my dad....was nice as was 3 colour plastic out the box.
The first models l built on my own were the Veb/Playfix be-6, & Tu- bomber, so nice to revisit.
Got X2 models at min I'm preparing for paint.
Yours is coming along well...."carefully work" 👍👍

Kesa Tiho
Ah yes, my favourite scale 1:no. Following with interest

Mr D
Thanks Cortex.
👍👍

Mr D
Hi Robert 👋
Thanks 👍

Skyhiker
That's coming together well.

Mr D
Thanks Skyhiker 👍
I usually use Velejo or AK acrylic, but I'm going to use Tamiya on this one as it won't fit in cabinet.....and l find Tamiya acrylic is a tough paint better for wear n tear, as I'm sure it's going to need dusting now n then 🙄🤣.
The Tamiya paint turns out to be darker than advertised on the lid n chart, I've ordered a white n thinner to Tone down.
Like you I've had 2x build going on.
The Fw-190 really pop's once decals are on..... Remember the trim tabs are red....l just had paint.
😁👍

Marko
As a child, I once built the kit with my father.
Very simple kit of its time. But the shapes and proportions are convincing and you really did a fantastic job with it. I'm looking forward to the finished model.👍

Mr D
Hi Marko👋
Nice to hear you have good memories too, first kit l built with my Dad was the Matchbox Electric lightning, it was good as had 3 colours... think my dad painted few bits silver too.
the Veb Playfix kits l would buy on Saturday morning with pocket money it came with strange pot glue.
I built 3 or 4 definitely built the Bear soviet bomber...l can remember.
Funny you commented on this tonight......as l was just checking it over ready for paint in next few days. I've just been wrapping up my IAR-80 project.
😁👍 Stay tuned

Weizenbrot
Wow, it would be very excited to see the finished model.Very detailed research and nice details. I visited an aviation museum in Beijing few months ago and saw this aircraft. A beautiful flying boat indeed.

Mr D
Hi Weizenbrot 👋
Yes it looks nice with it's gull shape wing, ione of its rolls was to search n destroy trespassing submarines with it's depth charges .
Think the Chinese one is Blue colour??
Thanks for interest 👍

Trez
Did you finish it? I just necro-surfed the whole build only to be unceremoniously dumped back at phot number 1 lol

Mr D
Hi Trez, l have recently painted the bottom colour, l will be painting the rest this week, lve had few other projects on the go... Won't be long.
😀👍

Weizenbrot
Hi Mr D. Yes they are light-blue for belly like the Soviet ones and dark blue for the rest part. Some of them have even been modified with turbo-porp engines.