Nyhetsstrøm
Roland Sachsenhofer
la til et nytt fotoalbum
la til et nytt fotoalbum
14 9 August, 07:14
Roland Sachsenhofer
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
9 August, 07:18
Transall NG
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
9 August, 11:50
Cuajete
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
9 August, 17:52
Roland Sachsenhofer
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
10 August, 17:25
Erik Leijdens
An unusual subject Roland! No doubt you will end up with a fantastic result
An unusual subject Roland! No doubt you will end up with a fantastic result
10 August, 17:34
Cuajete
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
10 August, 18:22
Thomas Kolb
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
10 August, 19:02
Roland Sachsenhofer
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
11 August, 09:28
Andre Souranis
eier nå
eier nå
Light Vehicles Of Allied & Axis During WWII 1/72 Ground Vehicle Series-1
Academy 1:72
13416 2019 Ny boks Flertema (3)11 August, 09:27
Roland Sachsenhofer
la til et nytt fotoalbum
la til et nytt fotoalbum
24 25 July, 08:02
Roland Sachsenhofer
These pictures start a build that gives me my first experience with 'Clear Prop' - and they are good ones! The fineness of the shapes, the accuracy of fit and the meaningfulness of the construction steps seem to combine to create a pleasurable building experience!
This plane is also highly interesting: originally derived as a drone for shooting practice from a small civilian predecessor model, hundreds were pulverised in the air. Some of those that survived this use went on to have an amazing career as light sports aircraft and enjoyed great popularity in the 1940s.
These pictures start a build that gives me my first experience with 'Clear Prop' - and they are good ones! The fineness of the shapes, the accuracy of fit and the meaningfulness of the construction steps seem to combine to create a pleasurable building experience!
This plane is also highly interesting: originally derived as a drone for shooting practice from a small civilian predecessor model, hundreds were pulverised in the air. Some of those that survived this use went on to have an amazing career as light sports aircraft and enjoyed great popularity in the 1940s.
25 July, 08:08
bughunter
Oh, a brand new kit?
It is hard to keep track all your parallel running builds! You speed of building all those birds is simply unbelievable and a great mystery to me!
Oh, a brand new kit?
It is hard to keep track all your parallel running builds! You speed of building all those birds is simply unbelievable and a great mystery to me!
25 July, 11:44
Robert Podkoński
I have the same impressions as Bughunter, frankly speaking 🙂 Following this build for sure.
I have the same impressions as Bughunter, frankly speaking 🙂 Following this build for sure.
25 July, 13:00
Roland Sachsenhofer
Hello mates! How nice that this small but lovely project has your interest and positive feedback! Indeed, a brand new kit that immediately caught my interest when I stumbled across it - so it ended up on the workbench straight away.
To answer the question about the current density of my projects: on the one hand, I sometimes wonder myself 🙂 On the other hand, I suspect that it has something to do with running three or four, maybe even five (at the moment, for example) projects in parallel . Something is 'always' being finished or started.
Hello mates! How nice that this small but lovely project has your interest and positive feedback! Indeed, a brand new kit that immediately caught my interest when I stumbled across it - so it ended up on the workbench straight away.
To answer the question about the current density of my projects: on the one hand, I sometimes wonder myself 🙂 On the other hand, I suspect that it has something to do with running three or four, maybe even five (at the moment, for example) projects in parallel . Something is 'always' being finished or started.
26 July, 14:32
Roland Sachsenhofer
I made the following preparations for the bright red of the final surface: first I applied yellow followed by a layer of white to the model. After drying, I sanded this base, which should make the following red "glow", with 1000, 1200 and 2000 grit sandpaper to make the colour layers more transparent again, to get a smooth surface and to find any flaws - you can see a few exposed on the fuselage and tail unit. I am surprised by the very high quality of the kit and look forward to finishing it!
I made the following preparations for the bright red of the final surface: first I applied yellow followed by a layer of white to the model. After drying, I sanded this base, which should make the following red "glow", with 1000, 1200 and 2000 grit sandpaper to make the colour layers more transparent again, to get a smooth surface and to find any flaws - you can see a few exposed on the fuselage and tail unit. I am surprised by the very high quality of the kit and look forward to finishing it!
2 August, 19:30
Roland Sachsenhofer
It looks like the Culver PQ-14 is ready! This was a most enjoyable project from start to finish. I am delighted with my first "clear prop" kit and I enjoyed the unusual history of the original. I made the seat belts and the aerial wiring, everything else can be found in the beautifully finished kit.
Thank you for your interest and your helpful and motivating comments!
It looks like the Culver PQ-14 is ready! This was a most enjoyable project from start to finish. I am delighted with my first "clear prop" kit and I enjoyed the unusual history of the original. I made the seat belts and the aerial wiring, everything else can be found in the beautifully finished kit.
Thank you for your interest and your helpful and motivating comments!
7 August, 19:03
Alex K
Beautiful! Great work as always... 👍 And also: thanks for showing this - it gave me the opportunity to revisit Culver's lineage: the Culver Dart, Cadet, Model V... the role played by Al Mooney... the PQ drones... Lovely!
Beautiful! Great work as always... 👍 And also: thanks for showing this - it gave me the opportunity to revisit Culver's lineage: the Culver Dart, Cadet, Model V... the role played by Al Mooney... the PQ drones... Lovely!
8 August, 15:24
Roland Sachsenhofer
Thank you for your motivating comments and your interest in a not often seen aircraft, mates! Alex, your list was an inspiration for me to have a look - and to find some interesting aircraft and interesting references - Culver: an amazing manufacturer! thanks!
Thank you for your motivating comments and your interest in a not often seen aircraft, mates! Alex, your list was an inspiration for me to have a look - and to find some interesting aircraft and interesting references - Culver: an amazing manufacturer! thanks!
9 August, 07:09
Johan van Meerloo
la til et nytt fotoalbum
la til et nytt fotoalbum
19 9 May 2023, 21:16
Johan van Meerloo
both are interesting, this one is total crap but will try to make the best of it
both are interesting, this one is total crap but will try to make the best of it
28 April, 17:11
Johan van Meerloo
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
for the crap kit it is, its going on quite okay now with some colour on it at least, hopefully the cannopy wont ruin it all due to the bad kit
20 July, 07:12
Skyhiker
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
I would have sanded those rivets off and reriveted both planes. But I can understand not doing that. Getting raised rivets to look good in silver is a real challenge.
20 July, 19:52
Toby2282
startet
startet
WWII German Heavy Cruiser
Prinz Eugen 1945 - Super Detail Set for Trumpeter FlyHawk Model 1:350
FH350069 2014 New tool 11 August, 09:17
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo