Nyhetsstrøm
littleblackbearønsker
Willys Jeep MB/Ford GPW: 101st Airborne Division
H-Models Decals 1:35
HMT35042 14 July, 02:25
Armory 1:144
Chad Ignagnieier nå
WWII Modernized US Battleship Detail Arkansas, New York, Texas, Nevada & Pennsylvania as modernized for WWII.
Tom's Modelworks 1:700
777 14 July, 02:18
Chad Ignagnieier nå
USS Texas BB-35 Wood Deck (Blue) for Trumpeter
BluewoxModel 1:700
BW20012A 14 July, 02:18
Desert Marlinla til et nytt fotoalbum
51 bilder
Israeli P-51D D-191 (2302) [COMPLETED]
1:32
A really pretty Scheme!
Prosjekt: P-51D Israeli D-191 (2302)
40 14 April, 21:47
Desert MarlinWell, the polycap that is supposed to link/sync the left and right elevators fell out during the process of joining the fuselage halves. So I had to saw out the little housing that was supposed to hold the polycap in place and set it manually. Looks like I have one "unforced error" so far...
26 April, 22:57
RandoThat Merlin is looking great. Looks like it came with the kit? Must be a lot easier than old resin, lol
27 April, 00:09
Desert MarlinIt's close to time to add the canopy and mask for paint. Lots of weathering yet to go. And the gun bays are looking a bit bland. Needs some additional paint and wiring.
1 May, 06:15
Desert MarlinTime to close up the cockpit and prep for paint. Going to be one of those traditional natural metal schemes with lots of wear and tear...
3 May, 05:06
RandoYep agreed Ky, my next P-51 will definitely be a Tamiya. How did detailing the gun bays go Marlin?
3 May, 14:37
Desert MarlinStill working on them. The fit has had only one issue that was even close to being worth mentioning. The right wing gun port on the leading edge did not fit perfectly. So I have had to do a little filling on the undersurface. The underwing scoop was almost an issue but seems to have settled into place. WARNING: one must fit the AILERONS BEFORE THE FLAPS. Otherwise the photo etched hinge does not get locked into place by the steel shaft from the outboard end of the flap. Missed this so it was unforced error #2...
3 May, 20:53
Desert MarlinOkay, after looking at some of the real aircraft, I am not sure there is any detail needed except to weather the bay and guns. I was expecting some electrical or other pipes/wiring, but alas, there does not appear to be any...
3 May, 21:41
Desert MarlinI'm back! So the masks provided are intended to be applied to the outside surface. However, it's really hard to mask the interior surface, so I cut the masks and applied them to the inside of the glass and then used Scotch tape for the outside. Leaving the interior a little "over masked, the black primer added to the outside with the flat black interior will create a nice effect overall.
2 June, 23:44
Desert MarlinBack at it! Prop is done, not yet weathered. Needs some scuffing along the leading edges.
1 July, 04:14
Desert MarlinI'm using Alclad and Metalizer. Sadly, my collection of Metalizer is shrinking. My choice for masking tape is 3M PostIt Notes. They work really well on the soft surface of Alclad Primers and Paints. Looking to seal it up next and start the process of marking/weathering.
4 July, 17:04
JohnI love the finish of Metalizer but hoo boy is it fragile. I hear you on supply. I'm all out of aluminum; stainless steel and jet exhaust are all that's left. 🙁
Your IDF Mustang is looking great, however!
4 July, 18:02
CaptGPFGoing to steal your post it notes trick for my next metallic project. Even i]with Xtreme Netal paints, I still have to wait a couple of days after I seal it with gloss - thanks Marlin!
5 July, 15:40
Paul Doyleeier nå
Kyushu J7W1 18-shi Intercepter Fighter Shinden (Japanese Navy Intercepter Fighter)
Hasegawa 1:72
00450 (D20) 2000 Ny boks 14 July, 02:16
Hemingwayla til et nytt fotoalbum
26 bilder
German Airfield, Winter, WIP
1:35
Weathering and adding the fiddily bits to the Krupp L3
Prosjekt: Winter German Airfield Dio
3+ 33 1 June, 23:39
Benjamen Deesla til et nytt fotoalbum
8 bilder
Blitzwing (Pocket Edition) - YM-L044D-C
No
Prosjekt: Blitzwing (Pocket Edition) - YM-L044D-C
14 July, 02:06
Desert Marlinla til et nytt fotoalbum
14 8 November 2023, 21:10
Desert MarlinThis project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
8 November 2023, 22:16
TreehuggerMaybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
9 November 2023, 05:17
Desert MarlinI'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
9 November 2023, 21:25
Desert MarlinGreat video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
25 November 2023, 00:46
Rick402eier nå
Barrels Set KwK. 30 & MG 34 for German Light Tanks Pz.Kpfw. II, Ausf. A-F
Aber 1:35
35L-106N 2016 Nye deler 14 July, 01:54
Desert Marlinla til et nytt prosjekt
1 12 April, 19:21
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo