Nyhetsstrøm
Juergen Klinglhuber
la til et nytt fotoalbum
la til et nytt fotoalbum
9 bilder
Eurofighter Typhoon - "Austrian Tigers" 7L*WC1:72
Done. This took quite a while, but I am happy with the result.
Prosjekt: #J7 Eurofighter Typhoon
18 31 May, 15:26
Juergen Klinglhuber
I got this kit for a reduced price on a flea-market - due to the fact that the cockpit and seat were missing. The former owner spoiled it or put it aside - I don't know exactly. But it wouldn't be me not taking this challenge. Lets go and scratch an Eurofighther cockpit...
I got this kit for a reduced price on a flea-market - due to the fact that the cockpit and seat were missing. The former owner spoiled it or put it aside - I don't know exactly. But it wouldn't be me not taking this challenge. Lets go and scratch an Eurofighther cockpit...
13 July, 20:45
Juergen Klinglhuber
thx for your interest Lukasz. I joint the fuselage last night & the cockpit did fit 🙂
pics will follow soon.
thx for your interest Lukasz. I joint the fuselage last night & the cockpit did fit 🙂
pics will follow soon.
17 July, 08:52
TH SCALE MODELS (Thomas Haberl)
ohhh nice work on the cockpit Jürgen! Taking a seat to see the progress 🙂
ohhh nice work on the cockpit Jürgen! Taking a seat to see the progress 🙂
17 July, 09:44
Juergen Klinglhuber
Hi mates - thank you for your nice words on my scratch work. Time consuming - but It came along nicely and better than I did expect.
Hi mates - thank you for your nice words on my scratch work. Time consuming - but It came along nicely and better than I did expect.
22 July, 08:38
Juergen Klinglhuber
Welcome. No worries - it's summertime again (progress is slow ... 😉 )
Welcome. No worries - it's summertime again (progress is slow ... 😉 )
22 July, 16:11
Calvin Gifford
Can hardly wait to get the Kustom Apache release of this kit!
Can hardly wait to get the Kustom Apache release of this kit!
3 in 1
1960 Chevrolet Apache Customizing Pickup Truck Kit with trailer and engine AMT 1:25
7960 1960 New tool 24 July, 07:06
Kxmdlr
ønsker
ønsker
X-Wing Starfighter Moving Edition Incom Corporation T-65 X-Wing Space Superirority Fighter
Bandai 1:48
0196419 (2260451) 2015 New tool 24 July, 07:05
NordMito
la til et nytt fotoalbum
la til et nytt fotoalbum
8 28 May, 15:16
CaptGPF
Good builds so far. u recommend apply panel line washes so the rivets and panel lines pop out a bit more. Your painting is nice and smooth - so the washes will add a nice pop in detail. 😀
Good builds so far. u recommend apply panel line washes so the rivets and panel lines pop out a bit more. Your painting is nice and smooth - so the washes will add a nice pop in detail. 😀
28 May, 15:26
Alexander
Agreed, though even without it the paintjob is so smooth that it looks really nice already - keep up the nice work! 👍
Agreed, though even without it the paintjob is so smooth that it looks really nice already - keep up the nice work! 👍
28 May, 18:45
Calvin Gifford
la til et nytt fotoalbum
la til et nytt fotoalbum
11 bilder
1/72 AMT/Hasegawa Belgium F-104G StarfighterNy: 23 July, 22:52 1:72
I knew I should NOT have followed the directions! LOL Getting the speed brakes in with the exhaust nozzle cemented in wa...
9 12 July, 04:54
Irakli Kokrashvili
la til et nytt fotoalbum
la til et nytt fotoalbum
15 22 July, 09:39
Steven Van Dyck
la til et nytt fotoalbum
la til et nytt fotoalbum
6 29 June, 00:14
Steven Van Dyck
The project starts with a horror movie where one figure was shot in the back and had to receive a graft. Part of a Trumpeter deformity was transplanted and now he is recovering from his ordeal. The surgeon had to slash the inside with a bayonet and use a syringe full of acid to be able to beat the torso in a comfortable shape.
The project starts with a horror movie where one figure was shot in the back and had to receive a graft. Part of a Trumpeter deformity was transplanted and now he is recovering from his ordeal. The surgeon had to slash the inside with a bayonet and use a syringe full of acid to be able to beat the torso in a comfortable shape.
7 July, 11:28
Steven Van Dyck
The RSO engine appears to be very fiddly, I can't seem to get it lined out straight in the frame. Today I was able to attach the tracklink supports and cut the wood for the dio base.
The RSO engine appears to be very fiddly, I can't seem to get it lined out straight in the frame. Today I was able to attach the tracklink supports and cut the wood for the dio base.
22 July, 19:54
Stefan L.
la til et nytt fotoalbum
la til et nytt fotoalbum
81 bilder
Messerschmitt BF 109-E7 from 7/JG 26Ny: 24 July, 06:52 1:48
Prosjekt: Messerschmitt BF 109-E7
50 14 July 2023, 21:33
Christian
Hallo Stefan, hab das selbe Modell im Regal. Bin gespannt wie deine wird, soweit schaut das richtig vielversprechend aus. Und ich bekomme bei deinen Bildern richtig Lust, den Bau der Messerschmitt ebenfalls zu starten!
Hallo Stefan, hab das selbe Modell im Regal. Bin gespannt wie deine wird, soweit schaut das richtig vielversprechend aus. Und ich bekomme bei deinen Bildern richtig Lust, den Bau der Messerschmitt ebenfalls zu starten!
21 July 2023, 18:10
Stefan L.
@Christian Hallo Christian, bist jetzt sind mir bei dem Modell keinerlei Probleme aufgefallen, alles passt wunderbar zusammen , kann dir nur empfehlen das Modell zu bauen. Selbst wenn das Modell verglichen mit den neuen Tamiya oder Eduard Modellen weniger Details aufweist, macht es sehr viel Spaß diese Details selber hinzuzufügen und selbst wenn man die Details weglässt, ist das Modell sehr schnell gebaut und für den Preis meiner Meinung nach sehr zu empfehlen. Abgesehen davon sind die meisten neuen Bausätze der BF109 von der G Variante und nicht von der E Variante. Hoffentlich kann ich dich mit meinem Bau inspirieren, dein Modell auch anzufangen 🙂
@Christian Hallo Christian, bist jetzt sind mir bei dem Modell keinerlei Probleme aufgefallen, alles passt wunderbar zusammen , kann dir nur empfehlen das Modell zu bauen. Selbst wenn das Modell verglichen mit den neuen Tamiya oder Eduard Modellen weniger Details aufweist, macht es sehr viel Spaß diese Details selber hinzuzufügen und selbst wenn man die Details weglässt, ist das Modell sehr schnell gebaut und für den Preis meiner Meinung nach sehr zu empfehlen. Abgesehen davon sind die meisten neuen Bausätze der BF109 von der G Variante und nicht von der E Variante. Hoffentlich kann ich dich mit meinem Bau inspirieren, dein Modell auch anzufangen 🙂
22 July 2023, 09:35
Christian
Schaut sehr gut aus Stefan! Die Sache mit den Nieten für meine E hat der Vorbesitzer meines Kits mit einem kompletten Satz Nieten Decals von HGW gelöst. Für andere Projekte hab ich auch schon über ein solches riveting Tool nachgedacht?! Hab jetzt einmal geplant, das Modell über den Winter zu bauen. Allerdings will ich vorher noch meine UH-1B und die MH-60K zu Ende bringen, bzw. diese parallel dazu bauen. Bis Mitte November bin ich noch sehr mit unserem Hausprojekt und der Landwirtschaft eingeteilt. Auf alle Fälle bin ich auf das Resultat deiner Bemühungen gespannt!!!
Schaut sehr gut aus Stefan! Die Sache mit den Nieten für meine E hat der Vorbesitzer meines Kits mit einem kompletten Satz Nieten Decals von HGW gelöst. Für andere Projekte hab ich auch schon über ein solches riveting Tool nachgedacht?! Hab jetzt einmal geplant, das Modell über den Winter zu bauen. Allerdings will ich vorher noch meine UH-1B und die MH-60K zu Ende bringen, bzw. diese parallel dazu bauen. Bis Mitte November bin ich noch sehr mit unserem Hausprojekt und der Landwirtschaft eingeteilt. Auf alle Fälle bin ich auf das Resultat deiner Bemühungen gespannt!!!
26 August 2023, 06:27
Stefan L.
@Christian Ein solches Nieten Set habe ich auch gesehen aber um ehrlich zu sein, ist es mir nicht wert, den Preis des gesamten Modells noch einmal für Nieten zu zahlen. Gut für dich, dass der Vorbesitzer sie schon gekauft hat, ich würde sie auf jeden Fall benutzen, bin schon gespannt wie deine Emil aussehen wird!
@Christian Ein solches Nieten Set habe ich auch gesehen aber um ehrlich zu sein, ist es mir nicht wert, den Preis des gesamten Modells noch einmal für Nieten zu zahlen. Gut für dich, dass der Vorbesitzer sie schon gekauft hat, ich würde sie auf jeden Fall benutzen, bin schon gespannt wie deine Emil aussehen wird!
7 September 2023, 22:08
Stefan L.
@Mark Lawrence since this is my first BF109, I'm no expert yet but I also like the Emil just simply due to the fact, that the Gustav variants seem to get build more often, which why I like seeing the Emil instead of yet another Gustav!
@Mark Lawrence since this is my first BF109, I'm no expert yet but I also like the Emil just simply due to the fact, that the Gustav variants seem to get build more often, which why I like seeing the Emil instead of yet another Gustav!
7 September 2023, 22:32
John
Looks great Stefan and nice cockpit. Neat trick on the fishing line, thanks.
Looks great Stefan and nice cockpit. Neat trick on the fishing line, thanks.
17 September 2023, 05:58
Stefan L.
@John thank you for your nice words! Always happy to spread some tips! 🙂
@John thank you for your nice words! Always happy to spread some tips! 🙂
18 September 2023, 06:53
Marcin Dudek
Wow, thanks for the detailed description! I learned a lot only by reding. I'm looking forward for more.
Wow, thanks for the detailed description! I learned a lot only by reding. I'm looking forward for more.
18 September 2023, 06:58
Stefan L.
@Marcin Dudek I really appreciate your comment Marcin! I wasn't expecting that someone really reads all the stuff I write but seems I was wrong! It makes me really happy that you found some useful tips even though this is just my second proper model and I am far from being a somehow experienced modeler. Take care and keep modeling 🙂
@Marcin Dudek I really appreciate your comment Marcin! I wasn't expecting that someone really reads all the stuff I write but seems I was wrong! It makes me really happy that you found some useful tips even though this is just my second proper model and I am far from being a somehow experienced modeler. Take care and keep modeling 🙂
19 September 2023, 21:25
John
For the boundaries since it's straight edge you can just touch it up with a post it note pretty easily.
For the boundaries since it's straight edge you can just touch it up with a post it note pretty easily.
19 September 2023, 22:35
Stefan L.
@John thanks for the tip! I would have masked it again but the post it method is much easier, didn't think of that, thanks alot!
@John thanks for the tip! I would have masked it again but the post it method is much easier, didn't think of that, thanks alot!
20 September 2023, 08:33
Jennifer Franklin
That's a neat trick with the fishing line; lots of great detail on your work. Very nice work so far.
That's a neat trick with the fishing line; lots of great detail on your work. Very nice work so far.
26 January, 07:26
Stefan L.
@Jennifer Franklin thank you for the nice words 🙂 I'm really trying my best and hope that my increased experience will show at the end result, especially when compared to my first ever modelkit, the Eurofighter
@Jennifer Franklin thank you for the nice words 🙂 I'm really trying my best and hope that my increased experience will show at the end result, especially when compared to my first ever modelkit, the Eurofighter
27 January, 10:24
TH SCALE MODELS (Thomas Haberl)
Looking good, especially knowing this is your second build. 1:48 is a good scale to start with. Thumbs up and keep modeling 👍
Looking good, especially knowing this is your second build. 1:48 is a good scale to start with. Thumbs up and keep modeling 👍
29 January, 11:55
John
Nice job on the exhaust/gun stains. 👍 You are right, you really can't go too thin on that mix. I'm cheap so I just use XF-1 (and other colors for allied planes that used leaded gas) thinned way down with isopropanol and make multiple passes until it looks right. I also add some pastel/pigment to give some body to the stain as well like you suggested. Looking good, Stefan!
Nice job on the exhaust/gun stains. 👍 You are right, you really can't go too thin on that mix. I'm cheap so I just use XF-1 (and other colors for allied planes that used leaded gas) thinned way down with isopropanol and make multiple passes until it looks right. I also add some pastel/pigment to give some body to the stain as well like you suggested. Looking good, Stefan!
22 July, 16:40
Stefan L.
@John thank you!! Tonight I also used black pigment in the core and close to the gun barrels to give the stains a more interesting look, happy with the result, pictures will follow soon! 🙂 And thanks for the tips, appreciate them alot! 🙂
@John thank you!! Tonight I also used black pigment in the core and close to the gun barrels to give the stains a more interesting look, happy with the result, pictures will follow soon! 🙂 And thanks for the tips, appreciate them alot! 🙂
22 July, 20:47
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo