Nyhetsstrøm
Irakli Kokrashvili
la til et nytt fotoalbum
la til et nytt fotoalbum
31 22 July, 09:39
Sergey E.
eier nå
eier nå
Ka-52 Wheels with separate hubs and weighted tires for Zvezda
Quinta Studio 1:48
QT48024 2024 New tool 28 July, 12:14
Sergey E.
ønsker
ønsker
Russian Helicopter "Alligator" exterior detail set for Zvezda
Microdesign 1:48
MD 048058 2024 New tool 28 July, 12:14
coporado
la til et nytt fotoalbum
la til et nytt fotoalbum
40 28 March, 16:26
coporado
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
1 April, 13:59
coporado
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
2 June, 10:18
Christoph Kunz
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
2 June, 11:03
coporado
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
9 June, 15:30
coporado
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
16 June, 09:20
coporado
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
23 June, 08:21
coporado
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
28 July, 07:18
Viking93
la til et nytt fotoalbum
la til et nytt fotoalbum
24 16 August 2020, 12:30
Olivier
Ready to strike... Nice little diorama full of tension. I really like the painting and weathering of the vehicle.
Ready to strike... Nice little diorama full of tension. I really like the painting and weathering of the vehicle.
17 January 2021, 18:03
Mathias Decommere
Very nice! Are those trees scratch -build? How did you do it?
Very nice! Are those trees scratch -build? How did you do it?
23 December 2022, 06:07
Viking93
Thank you. The trees are from a tree set, but i upgraded them to look more realistic. I sprinkled sawdust on the trunk to replicate the rough bark texture and repainted the trunk and green to get a more realistic look.
Thank you. The trees are from a tree set, but i upgraded them to look more realistic. I sprinkled sawdust on the trunk to replicate the rough bark texture and repainted the trunk and green to get a more realistic look.
23 December 2022, 06:44
surturiel
eier nå
eier nå
Messerschmitt Me 410A-1/U2 & U4 one-sided mask Airfix
ASK (Art Scale Kit) 1:72
200-M72087 2023* New tool 28 July, 12:01
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo