Nyhetsstrøm
Mike Szwarc
la til et nytt fotoalbum
la til et nytt fotoalbum
7 bilder
RPG 1/35 Phalanx CIWSNy: 3 October, 20:19 1:35
Prosjekt: US Navy Phalanx Close-In Weapon System
7 23 September, 02:31
Mike Szwarc
I got the Mod 11 Block 1B version of this kit because I found it on sale for a good price. What I didn't know (until I started building it) is that this kit is basically RPG's MK -15 Phalanx CIWS kit plus the different parts needed to build the Mod 11 Block 1B version. I wasn't paying close enough attention to the instructions when I started building, and ended up assembling the tracking radar enclosure using a panel for the standard MK-15, and I didn't catch the error until after the glue had set. While trying to figure out what to do, I discovered that this kit had all the parts to build the standard version, so I downloaded the instructions from Scalemates, and happily continued building the standard MK-15 . . . until I got to the barrel assembly. I had to drill out the barrel support blocks with much larger drills than indicated in the instructions, and then when I test fit the barrel assembly to the gun mechanism, I discovered that the barrels were about 7 or 8 mm too short. The Mod 11 Block 1B uses a shorter barrel. I eventually solved the problem by affixing a piece of brass tube to the gun mechanism to lengthen the socket that accepts the end of the barrel assembly. Once painted and assembled, the fix shouldn't be too obvious.
I got the Mod 11 Block 1B version of this kit because I found it on sale for a good price. What I didn't know (until I started building it) is that this kit is basically RPG's MK -15 Phalanx CIWS kit plus the different parts needed to build the Mod 11 Block 1B version. I wasn't paying close enough attention to the instructions when I started building, and ended up assembling the tracking radar enclosure using a panel for the standard MK-15, and I didn't catch the error until after the glue had set. While trying to figure out what to do, I discovered that this kit had all the parts to build the standard version, so I downloaded the instructions from Scalemates, and happily continued building the standard MK-15 . . . until I got to the barrel assembly. I had to drill out the barrel support blocks with much larger drills than indicated in the instructions, and then when I test fit the barrel assembly to the gun mechanism, I discovered that the barrels were about 7 or 8 mm too short. The Mod 11 Block 1B uses a shorter barrel. I eventually solved the problem by affixing a piece of brass tube to the gun mechanism to lengthen the socket that accepts the end of the barrel assembly. Once painted and assembled, the fix shouldn't be too obvious.
23 September, 11:59
Soeren R.
merket denne som i bestilling
merket denne som i bestilling
interior 3D decal
Ka-27PL (Military Version) for HobbyBoss | w/ 3D-printed resin parts Quinta Studio 1:48
QD+48357 2023 New tool 4 October, 10:24
Oliver Peissl
la til et nytt fotoalbum
la til et nytt fotoalbum
15 4 October, 02:00
Gary Victory
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
Really nice build and finish Oliver. Would like to see more pictures if possible..? Wonderful work Sir.
4 October, 06:36
BAT21
la til et nytt fotoalbum
la til et nytt fotoalbum
23 3 October, 12:03
Anatolii Smyshliaiev
Excellent work. And mine has been standing unpainted for several years. Only in the Mi-10PP version with a container of electronic interference.
Excellent work. And mine has been standing unpainted for several years. Only in the Mi-10PP version with a container of electronic interference.
3 October, 19:21
Neuling
Clean and careful work on this interesting helicopter. Very appealing paintwork!
Clean and careful work on this interesting helicopter. Very appealing paintwork!
4 October, 10:20
Edouard Carr
la til et nytt fotoalbum
la til et nytt fotoalbum
43 bilder
Iron Maiden - Aces HighNy: 3 October, 19:05 1:32
Eddie getting comfortable
Prosjekt: Iron Maiden Aces High
12 12 August, 17:43
Edouard Carr
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Sean
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
29 September, 21:49
Edouard Carr
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
4 October, 10:19
Moaske
la til et nytt fotoalbum
la til et nytt fotoalbum
17 bilder
US Navy X-47B UCAS build logNy: 4 October, 08:10 1:48
And finished :-)
Prosjekt: US Navy X-47B UCAS
12 26 September, 15:03
AndreasK
la til et nytt fotoalbum
la til et nytt fotoalbum
68 11 February, 20:10
AndreasK
Cockpit detailing finished and primed/RLM66
Started riveting with the new tool I bought at EME in Lingen
Cockpit detailing finished and primed/RLM66
Started riveting with the new tool I bought at EME in Lingen
31 March, 13:04
AndreasK
Ok, riveting is time-consuming but also relaxing. I gave the wing a wash to check the result. Looking good so far. I just hope that it will be still visible after paint job
Ok, riveting is time-consuming but also relaxing. I gave the wing a wash to check the result. Looking good so far. I just hope that it will be still visible after paint job
9 April, 18:34
AndreasK
Finished the E381. Just some light panel line wash, no chipping or fading, as this was more or less a one-time flyer...
Finished the E381. Just some light panel line wash, no chipping or fading, as this was more or less a one-time flyer...
21 July, 09:48
AndreasK
Today I began the painting process for the 234. Sprayed RLM66 on the canopy and also used this for preshading of the upperside. Preshading of the underside was done with Intermediate Blue. I tried these colours instead of the usual black to obtain less contrast to the base coats and make it blend better. Hopefully...
Today I began the painting process for the 234. Sprayed RLM66 on the canopy and also used this for preshading of the upperside. Preshading of the underside was done with Intermediate Blue. I tried these colours instead of the usual black to obtain less contrast to the base coats and make it blend better. Hopefully...
17 August, 19:08
AndreasK
With the engine outlets and canopy frames done, painting comes to an end. Especially the latter was very tedious in terms of masking. But I am satisfied with the result 😃
With the engine outlets and canopy frames done, painting comes to an end. Especially the latter was very tedious in terms of masking. But I am satisfied with the result 😃
11 September, 20:14
AndreasK
Decals are on. Next step panel line wash to bring out all the rivets I made.
Decals are on. Next step panel line wash to bring out all the rivets I made.
19 September, 15:51
William Joel
Very nice. Amazing detail on the cockpit, looks impressive.
I have 2 old Ar 234 in progress, but the cockpits, or should I say lack of, that came with the kit just don't compare. I did a bit of scratch building, but just so something could be seen.
Question - what size wire did you use for the cockpit?
Very nice. Amazing detail on the cockpit, looks impressive.
I have 2 old Ar 234 in progress, but the cockpits, or should I say lack of, that came with the kit just don't compare. I did a bit of scratch building, but just so something could be seen.
Question - what size wire did you use for the cockpit?
2 October, 19:24
ΔΠ
Very beautiful model! I really like it, especially the riveting and the cockpit. Did you treat the cockpit windows in any way, or are they straight out of the box? That would surprise me with Revell, to be honest 😉
Very beautiful model! I really like it, especially the riveting and the cockpit. Did you treat the cockpit windows in any way, or are they straight out of the box? That would surprise me with Revell, to be honest 😉
3 October, 12:33
AndreasK
The canopy had some scratches, so I sanded and polished it a bit.
@William: it is copper wire, but I do not know the size. I will measure it and get back to you.
@all: thanks for the nice comments ❤️
The canopy had some scratches, so I sanded and polished it a bit.
@William: it is copper wire, but I do not know the size. I will measure it and get back to you.
@all: thanks for the nice comments ❤️
3 October, 18:57
Simon
la til et nytt fotoalbum
la til et nytt fotoalbum
159 bilder
Arado Ar (E) 555 - Work in Progress1:72
Tag 90: Auf die Oberseite erste Schicht Gloss Varnish aufgetragen. Dieses Mal mit weniger Druck, Farbmenge und Abstand. ...
Prosjekt: Arado Ar (E) 555
104 20 November 2023, 21:56
Mr James
That is one impressive paint job. Excellent skills shown with an airbrush 🙂
That is one impressive paint job. Excellent skills shown with an airbrush 🙂
20 November 2023, 23:28
Pipeman86
Hey Simon, richtig richtig gut!! Vor allem auch die Grundierung nach dem Verschleifen (Bild 1). Mega!!!
Hey Simon, richtig richtig gut!! Vor allem auch die Grundierung nach dem Verschleifen (Bild 1). Mega!!!
21 November 2023, 07:46
Simon
Thank you very much guys!!
Vielen Dank Bernd und Chris!! Als nächstes werden die Markierungen auf den Seitenleitwerken und den Tragflächen gesprayt!! 🙂
Thank you very much guys!!
Vielen Dank Bernd und Chris!! Als nächstes werden die Markierungen auf den Seitenleitwerken und den Tragflächen gesprayt!! 🙂
21 November 2023, 20:49
Simon
Yes, certain similarities in the camouflage pattern cannot be denied. 🙂 It wasn't really the intention, it was supposed to be a mix of larger and smaller patches. But I still like it now. 🙂
Yes, certain similarities in the camouflage pattern cannot be denied. 🙂 It wasn't really the intention, it was supposed to be a mix of larger and smaller patches. But I still like it now. 🙂
30 November 2023, 05:47
Ben M
It looks really remarkable. You have constant density for all the patches. Skills!
It looks really remarkable. You have constant density for all the patches. Skills!
30 November 2023, 19:37
Simon
Thank you very much!! 🙂 That pushes me to go on with the repainting of the intake / nozzle part! 🙂
Thank you very much!! 🙂 That pushes me to go on with the repainting of the intake / nozzle part! 🙂
13 December 2023, 18:32
Skyhiker
I love this kit, it was one of my favorite to build. You have done a masterful job on that camo. Looks great.
I love this kit, it was one of my favorite to build. You have done a masterful job on that camo. Looks great.
8 February, 07:06
HSC1932
This is the best Arado 555 I've seen, and I've seen many. What paint did you use to achieve that excellent finish?
This is the best Arado 555 I've seen, and I've seen many. What paint did you use to achieve that excellent finish?
8 February, 16:32
Simon
Many thanks to you both! I'm really pleased that you like the paintwork! The project has already taken a lot of time so far. At first I thought it would be a quick job, but in the end the sanding, re-engraving and the countless thin layers of paint have taken a lot of time. Probably also because I watch series on the side 🙂
@HSC1932: I now only use Vallejo colours, mostly the Model Air colours if available. I also thin them a lot now: 4:2:3 (Flow Improver : Thinner : Paint). For the two main colours I used Vallejo MA 71.257 Light Blue RLM76 and MA 71.259 Grey Violet RLM75.
Many thanks to you both! I'm really pleased that you like the paintwork! The project has already taken a lot of time so far. At first I thought it would be a quick job, but in the end the sanding, re-engraving and the countless thin layers of paint have taken a lot of time. Probably also because I watch series on the side 🙂
@HSC1932: I now only use Vallejo colours, mostly the Model Air colours if available. I also thin them a lot now: 4:2:3 (Flow Improver : Thinner : Paint). For the two main colours I used Vallejo MA 71.257 Light Blue RLM76 and MA 71.259 Grey Violet RLM75.
8 February, 18:27
Hans-Jürgen Haag
👍👍Sieht heiß aus das Teil, besonders die Camouflage, hast du da ein Netz drüber gelegt und drüber gesprüht?
👍👍Sieht heiß aus das Teil, besonders die Camouflage, hast du da ein Netz drüber gelegt und drüber gesprüht?
8 February, 18:41
Simon
Moin Hans-Jürgen! Vielen Dank!! Ne, das habe ich mit ganz wenig Druck, geringem Abstand und der Politik der ruhigen Hand gemacht! 😉
Moin Hans-Jürgen! Vielen Dank!! Ne, das habe ich mit ganz wenig Druck, geringem Abstand und der Politik der ruhigen Hand gemacht! 😉
8 February, 18:43
Secretary at ESSMC
Love the paint job - looks "submarine"
Great kit - see mine from a few years ago..SCM Search: roger trewenack arado*
I'll keep watching your work!
Love the paint job - looks "submarine"
Great kit - see mine from a few years ago..SCM Search: roger trewenack arado*
I'll keep watching your work!
13 April, 07:39
Simon
Thanks Mr. Secretary! 😅 Now that you mention it, it does look a bit like a ray. A ray with giraffe skin. 😁 Your Arado looks great too! What an idea with the camouflage. 👍🏼
Thanks Mr. Secretary! 😅 Now that you mention it, it does look a bit like a ray. A ray with giraffe skin. 😁 Your Arado looks great too! What an idea with the camouflage. 👍🏼
13 April, 12:09
Weizenbrot
la til et nytt fotoalbum
la til et nytt fotoalbum
56 27 September, 14:30
Mr D
Very 👍👍 nice.
The Rising sun decals look painted on and looks good. Nice job, lm yet to build a WW2 Japanese fighter.
Antenna is good too.....is it thread or stretch spru ??
Very 👍👍 nice.
The Rising sun decals look painted on and looks good. Nice job, lm yet to build a WW2 Japanese fighter.
Antenna is good too.....is it thread or stretch spru ??
27 September, 21:20
Weizenbrot
Thank you Bernhard. Yes it is, I will upload some more pictures for the process.
Thank you Bernhard. Yes it is, I will upload some more pictures for the process.
28 September, 02:47
Weizenbrot
Hi Mr D. Haha they are painted on. I tried to use as less decals as possible except somethings like the Japanese "No Step" which is too complicated for me XD. The Antenna is 0.05 mm copper wire.
Hi Mr D. Haha they are painted on. I tried to use as less decals as possible except somethings like the Japanese "No Step" which is too complicated for me XD. The Antenna is 0.05 mm copper wire.
28 September, 02:51
Marcin Terlikowski
I finished exactly the same one few weeks ago. What color is on fuselage?
I finished exactly the same one few weeks ago. What color is on fuselage?
28 September, 06:57
Weizenbrot
Hi Marcin. It was Mr. Hobby's Kawasaki Green for base. For highlight I added some yellow and white. For shadow I added Japanese propeller or any brown in red tone will work.
Hi Marcin. It was Mr. Hobby's Kawasaki Green for base. For highlight I added some yellow and white. For shadow I added Japanese propeller or any brown in red tone will work.
28 September, 08:05
Mr D
Really nice detailed finish, Nice Japanese green 👌
Can l ask what you used the Dremel for..??
Like it 👍👍👍
Really nice detailed finish, Nice Japanese green 👌
Can l ask what you used the Dremel for..??
Like it 👍👍👍
1 October, 21:53
John
Great result and attention to detail. Riveting job, chipping and paintjob, all top-notch 👍
Great result and attention to detail. Riveting job, chipping and paintjob, all top-notch 👍
1 October, 21:54
Weizenbrot
Hi Mr D, did you mean the power tool? I used it to sand along rivet lines to create a stressed skin effect.
Hi Mr D, did you mean the power tool? I used it to sand along rivet lines to create a stressed skin effect.
2 October, 15:32
Mr D
Hi Weizenbrot.
Yes, l thought that was what was happening? But wanted to confirm..... good idea...more realistic as aluminium wraps to the structure.... especially on the Japanese craft.
Thanks......" Always good to learn"😃👍👍
Hi Weizenbrot.
Yes, l thought that was what was happening? But wanted to confirm..... good idea...more realistic as aluminium wraps to the structure.... especially on the Japanese craft.
Thanks......" Always good to learn"😃👍👍
2 October, 17:36
Weizenbrot
Thank you Mr D! I truly agree with you that the the effect is suitable for Japanese aircrafts. I was thinking of giving the observers a feeling of the thin skin is really attached on spars and ribs.
Thank you Mr D! I truly agree with you that the the effect is suitable for Japanese aircrafts. I was thinking of giving the observers a feeling of the thin skin is really attached on spars and ribs.
3 October, 09:07
Thomas Wirsching
Great Ki-100! Mine is on hold because I was never able to find a plan where the rivetting is visible for this specific aircraft. Looks like you found one. Can you give me a hint?
Great Ki-100! Mine is on hold because I was never able to find a plan where the rivetting is visible for this specific aircraft. Looks like you found one. Can you give me a hint?
3 October, 09:23
Weizenbrot
Hey Thomas, sure! I got the rivet map scanned. It was in 48 scale so is perfect for this kit. I can send it to you if you can leave me your email.
Hey Thomas, sure! I got the rivet map scanned. It was in 48 scale so is perfect for this kit. I can send it to you if you can leave me your email.
3 October, 11:38
Rui S
la til et nytt fotoalbum
la til et nytt fotoalbum
99 12 March 2015, 16:12
Rui S
Hi Kevin, Thx for your words and reviving the this album 🙂
@ John Thx for your compliment words 🙂
Hi Kevin, Thx for your words and reviving the this album 🙂
@ John Thx for your compliment words 🙂
18 July 2015, 22:53
Marko Paakkanen
Very nice diorama.. lot of details. that's give always realistic appearance.
Good job!
Very nice diorama.. lot of details. that's give always realistic appearance.
Good job!
23 July 2015, 03:34
Rui S
No oils, no washes, no filters, no pigments (except in panzer II, I think) no aftermarkets, no PE.
Just a badger 200, and lots of humbrol enamel. That was it. Off course the end result shows all that. 🙂
No oils, no washes, no filters, no pigments (except in panzer II, I think) no aftermarkets, no PE.
Just a badger 200, and lots of humbrol enamel. That was it. Off course the end result shows all that. 🙂
24 July 2015, 01:23
Clifford Keesler
You are welcome sir. If it doesn't have wings or rotor blades, I don't have a clue. I just sent all of my armour to Hunter Cummings.
You are welcome sir. If it doesn't have wings or rotor blades, I don't have a clue. I just sent all of my armour to Hunter Cummings.
24 July 2015, 01:33
Rui S
HEHEHE I understand, mate.
For me is more, if it as wings it must be on ground with some vehicle around, LOL
is this a lyric??? (((😄)))
P.S. Lucky Hunter...
HEHEHE I understand, mate.
For me is more, if it as wings it must be on ground with some vehicle around, LOL
is this a lyric??? (((😄)))
P.S. Lucky Hunter...
24 July 2015, 01:40
Neil Patrick
Love this. Reminds me that I:
1. Built these first in the 1970s (badly)
2. Tried correcting and superdetailing them in the 1980s (giving up after countless hours)
3. Bought more accurate, better detailed and much more complicated kits 1990- now (very few finished)
This reminds us that great results can be achieved with simple old kits. Just add skill. It what's in the modellers fingers and head is as much as what in the box that counts.
Brilliant work Rui!
Love this. Reminds me that I:
1. Built these first in the 1970s (badly)
2. Tried correcting and superdetailing them in the 1980s (giving up after countless hours)
3. Bought more accurate, better detailed and much more complicated kits 1990- now (very few finished)
This reminds us that great results can be achieved with simple old kits. Just add skill. It what's in the modellers fingers and head is as much as what in the box that counts.
Brilliant work Rui!
26 December 2021, 10:56
Rui S
Thank you for your kind comments, mates. Sorry for the late reply.
In this case first I build the pz III, them the halftrack, them I think it was the pz II (built by my sun and painted by me), them I recover the jeep, built in another Century 😄 or vice versa, not sure 🤔 it was a dinamic evolutive Dio, mostly becouse I had the space to add more kits 😉
@Neil, I've to agree with you. Slowly I Will try my best with better and more e expensive kits that I've in my stash. Also looking forward to see what you Will do Next 😎
@Markus, I'm glad you like this enough to comment.
Thank you for your kind comments, mates. Sorry for the late reply.
In this case first I build the pz III, them the halftrack, them I think it was the pz II (built by my sun and painted by me), them I recover the jeep, built in another Century 😄 or vice versa, not sure 🤔 it was a dinamic evolutive Dio, mostly becouse I had the space to add more kits 😉
@Neil, I've to agree with you. Slowly I Will try my best with better and more e expensive kits that I've in my stash. Also looking forward to see what you Will do Next 😎
@Markus, I'm glad you like this enough to comment.
4 January 2022, 17:00
Rui S
Thank you Bobisek, yah I think they were nicely adapted, mainly the guy in the side hatch. This is an old Dio but thx for reminding me 😉
Thank you Bobisek, yah I think they were nicely adapted, mainly the guy in the side hatch. This is an old Dio but thx for reminding me 😉
4 January 2022, 17:31
Daniel Klink
One can really taste the sand between the teeth and feel the Dust everywhere.
Great atmospheri result Mate.. Congrats Rui!!! 👍👍
One can really taste the sand between the teeth and feel the Dust everywhere.
Great atmospheri result Mate.. Congrats Rui!!! 👍👍
5 January 2022, 00:21
Rui S
Thank you for your kind comment, Daniel. Really apreciated.
Yap, for me the desert means lot's of dust 😄
This is part of another álbum with more photos of this Dio:
Tunís | Album by mig (1:35)
Thank you for your kind comment, Daniel. Really apreciated.
Yap, for me the desert means lot's of dust 😄
This is part of another álbum with more photos of this Dio:
Tunís | Album by mig (1:35)
5 January 2022, 00:50
Neil
Wow! Looks fantastic Rui 👍 I think Daniel summed it up well. You can indeed 'taste' the sand!
Wow! Looks fantastic Rui 👍 I think Daniel summed it up well. You can indeed 'taste' the sand!
15 January 2022, 23:54
Rui S
Thank you Mate. I've learn a lot since, but I apreciate your kind words very much 🙂
Thank you Mate. I've learn a lot since, but I apreciate your kind words very much 🙂
16 January 2022, 00:00
Rui S
Thank you Stefan, Nice of you to stop by and comment this old work. I'm glad you like it.
Thank you Stefan, Nice of you to stop by and comment this old work. I'm glad you like it.
19 January 2022, 23:51
Rui S
Thank you Mates. Very kind of you to comment. Apreciated. (You know how much I like your work too, so even more important to me).
I think I've evolve a lot since this One, but I sure enjoy a lot DAK scenes and in this case all this 4 kits.
Thank you Mates. Very kind of you to comment. Apreciated. (You know how much I like your work too, so even more important to me).
I think I've evolve a lot since this One, but I sure enjoy a lot DAK scenes and in this case all this 4 kits.
22 January 2022, 14:47
Neil Patrick
Also reminds me Rui just how inspiring those early Tamiya boxarts were. 50 years on and they are still amongst my favourites. I don't know who painted them but he had an amazing style combining pinpoint accuracy of vehicles and people with an almost abstract use of colour. Try discerning a 'correct' RAL colour from them...
Also reminds me Rui just how inspiring those early Tamiya boxarts were. 50 years on and they are still amongst my favourites. I don't know who painted them but he had an amazing style combining pinpoint accuracy of vehicles and people with an almost abstract use of colour. Try discerning a 'correct' RAL colour from them...
22 January 2022, 16:14
Rui S
@ Neil, couldn't agree with you more. Even nowadays, you look to a pile of 1/35 tamiyas and even the sides are almost Impossible to resist.
@ C Jackson, Thank you for your kind comment, I'm glad you like this One. Apreciated.
@ Neil, couldn't agree with you more. Even nowadays, you look to a pile of 1/35 tamiyas and even the sides are almost Impossible to resist.
@ C Jackson, Thank you for your kind comment, I'm glad you like this One. Apreciated.
22 January 2022, 17:01
Neil Patrick
I put together a Pinterest board with my favourite Tamiya box art illustrations Rui, including some rareties. Whilst the recent ones are okay, none beat those 1970s ones in my view.
pinterest.co.uk/newc..tamiya-best-box-art/
I put together a Pinterest board with my favourite Tamiya box art illustrations Rui, including some rareties. Whilst the recent ones are okay, none beat those 1970s ones in my view.
pinterest.co.uk/newc..tamiya-best-box-art/
23 January 2022, 10:46
Neuling
I fully agree with Neil and Rui about the Tamiya box art which really was trend setting. I have collected the box tops.
I fully agree with Neil and Rui about the Tamiya box art which really was trend setting. I have collected the box tops.
23 January 2022, 11:31
Rui S
@Neil, Don't know why but the ones I like the most are the ones wth the subjects Over white
@Neuling, Over the years I've done that, as you know. And I've done a photoalbum:
My love for the Hobby | Album by mig
You could do One too?
@Neil, Don't know why but the ones I like the most are the ones wth the subjects Over white
@Neuling, Over the years I've done that, as you know. And I've done a photoalbum:
My love for the Hobby | Album by mig
You could do One too?
23 January 2022, 15:10
Mina Ro
I am choking on dust and sand just looking at this, beautiful and very authentic!
I am choking on dust and sand just looking at this, beautiful and very authentic!
20 July 2022, 21:19
Rui S
Hi Mina, Thank you very much for stoping by on this one. It was my 2nd dio (I Think).
when I finished the Pz III, I miscalculated the size of the base and then I added the halftrack, then the Pz II (made with my son), but there was still a lot of space left so, I ended up recovering the jeep (made n years before) to add it.
I'm glad you found it whorthy of your kind words. Apreciatted
Hi Mina, Thank you very much for stoping by on this one. It was my 2nd dio (I Think).
when I finished the Pz III, I miscalculated the size of the base and then I added the halftrack, then the Pz II (made with my son), but there was still a lot of space left so, I ended up recovering the jeep (made n years before) to add it.
I'm glad you found it whorthy of your kind words. Apreciatted
21 July 2022, 22:21
gvizbi
Excellent dio Rui. I love how busy it looks. So many details, I could look at it for hours 🙂
Excellent dio Rui. I love how busy it looks. So many details, I could look at it for hours 🙂
23 May 2023, 06:59
Rui S
@ gvizbi, thank you for stopping by and comment this oldy. I Know you also like Afrika Korps and your excellent examplar model's. Maybe that's why you like this one 😄
@ Mr James thank you. I'm glad you like it. This is one Dio that was evolving for years. The big initial base always left room for another addition 😉
@ David, thx. You are too kind, mate.
@ gvizbi, thank you for stopping by and comment this oldy. I Know you also like Afrika Korps and your excellent examplar model's. Maybe that's why you like this one 😄
@ Mr James thank you. I'm glad you like it. This is one Dio that was evolving for years. The big initial base always left room for another addition 😉
@ David, thx. You are too kind, mate.
23 May 2023, 21:14
Mina Ro
One piece of advice, your painting of figures is great but one small thing to make them pop would be to buy a sheet of archer eye ball decals, I use them a lot but youll need to use a hole punch to cut them out.
One piece of advice, your painting of figures is great but one small thing to make them pop would be to buy a sheet of archer eye ball decals, I use them a lot but youll need to use a hole punch to cut them out.
24 May 2023, 05:45
Rui S
@ Mina, thank you for your advice, noticed, but this guy's where painted a longe time ago. I think I've made some nice progress in figure painting since them, (I like to believe) but I and others always consider that in this scale and to look from 50cm or more, I don't need to give such emphasis to the eye balls, normally I use only a bit of darker color. I'm sure your suggestion will achieve better results than that white big staring toyish eyes that to often we can see in faces. Also I avoid spend money on aftermarket
@ James and Clifford, thx for your comment apreciated
@ Mina, thank you for your advice, noticed, but this guy's where painted a longe time ago. I think I've made some nice progress in figure painting since them, (I like to believe) but I and others always consider that in this scale and to look from 50cm or more, I don't need to give such emphasis to the eye balls, normally I use only a bit of darker color. I'm sure your suggestion will achieve better results than that white big staring toyish eyes that to often we can see in faces. Also I avoid spend money on aftermarket
@ James and Clifford, thx for your comment apreciated
24 May 2023, 20:35
Rui S
Thank you Randy for your nice comment on this oldie. I really enjoyed doing it, as I was adding models while I had space in the base that was intended just for the panzer III the figures and the halftrack. 😄
You can see more photos here:
Tunís | Album by MIG (1:35)
I don't remember anymore why I ended up making 2 albums at the time 🤔
Thank you Randy for your nice comment on this oldie. I really enjoyed doing it, as I was adding models while I had space in the base that was intended just for the panzer III the figures and the halftrack. 😄
You can see more photos here:
Tunís | Album by MIG (1:35)
I don't remember anymore why I ended up making 2 albums at the time 🤔
22 September, 21:24
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo