Nyhetsstrøm
Thomas Wirsching
la til et nytt fotoalbum
la til et nytt fotoalbum
9 20 July, 13:27
Thomas Wirsching
Thank you Kate and Mathias. That gras diorama piece was from dennisminiaturesdesign.de/shop/diorama/ a german producer of 3d printed figures and some other stuff. I´ve bought it from Modellbau König in Germany. I am not sure if they still carry it. I was not overly impressed as I had to cut quite substantial parts of the corners because the grass was applied irregularly there and looked ugly. I got a discount for that by the dealer and kept it for a while didn´t knew what to do with it until I decided for this diorama.. For this small scenario it did fit perfectly 😊
Thank you Kate and Mathias. That gras diorama piece was from dennisminiaturesdesign.de/shop/diorama/ a german producer of 3d printed figures and some other stuff. I´ve bought it from Modellbau König in Germany. I am not sure if they still carry it. I was not overly impressed as I had to cut quite substantial parts of the corners because the grass was applied irregularly there and looked ugly. I got a discount for that by the dealer and kept it for a while didn´t knew what to do with it until I decided for this diorama.. For this small scenario it did fit perfectly 😊
3 October, 19:16
Nicolas
la til et nytt fotoalbum
la til et nytt fotoalbum
41 bilder
WIP: Eurocopter BK-117 "Space Design" D-HBKS Ny: 3 October, 17:57 1:72
At sunday I installed the engine compartment, the rotorshaft and the tail, so today i could prime everything. As you can...
Prosjekt: BK 117 "SPACE DESIGN"
24 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
15 July, 16:33
bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
19 July, 18:39
Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
19 July, 19:38
Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
8 August, 19:53
Nicolas
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
9 August, 05:02
Mr D
Hi Nicolas, doing a good job on the extra detail bits.
Be worth it, you only get to build it once...so worth getting it how you want it.
Nice 👍👍👍
Hi Nicolas, doing a good job on the extra detail bits.
Be worth it, you only get to build it once...so worth getting it how you want it.
Nice 👍👍👍
24 August, 10:45
Kesa Tiho
Very nice build. Ive always been curious though, how do you get such a precise paint job. Especially with the interior.
Very nice build. Ive always been curious though, how do you get such a precise paint job. Especially with the interior.
16 September, 19:01
Nicolas
Hi Kesa, I do most of the interior freehand with a small brush (mostly size 000, but details sometimes with size 10/0) and well diluted paint. You kan put your brushhand onto the hand holding the part to reduce shaking.
Hi Kesa, I do most of the interior freehand with a small brush (mostly size 000, but details sometimes with size 10/0) and well diluted paint. You kan put your brushhand onto the hand holding the part to reduce shaking.
16 September, 19:11
Robert
merket denne som i bestilling
merket denne som i bestilling
Sd.Kfz. 250 Ausf.A Schützenpanzerwagen 2in1(Sd.Kfz. 250/10 w/3.7 Pak/Sd.Kfz. 250/11 le SPW with Panzerbüchse 41)
Dragon 1:35
6426 2024* Nye deler 3 October, 19:14
Miguel Vaquero
la til et nytt fotoalbum
la til et nytt fotoalbum
9 bilder
Grogu playing with a butterfly Ny: 3 October, 19:13 1:
Pram painted and detailed. Next step a gloss varnish to make the white shine and some minor panel lining and westhering
Prosjekt: Grogu playing with a butterfly
Scratchbuilt
6 29 September, 21:46
Miguel Vaquero
Trying something completely new for me this time around. I found this resin model of Grogu on the internet, and since my girlfriend loved The Mandalorian, and of course, Grogu, I decided I wanted to surprise her with this figure painted by my self.
It's my first time painting a figure so let's see how it goes
Trying something completely new for me this time around. I found this resin model of Grogu on the internet, and since my girlfriend loved The Mandalorian, and of course, Grogu, I decided I wanted to surprise her with this figure painted by my self.
It's my first time painting a figure so let's see how it goes
29 September, 21:49
Steezee
ønsker
ønsker
Mitsubishi A6M2 Zero Fighter (Zeke) w/4x4 Light Vehicle Type 95 Kurogane & Maintenance Crew
Tamiya 1:48
89757 2008 Nye deler Flertema (3)3 October, 19:09
Edouard Carr
la til et nytt fotoalbum
la til et nytt fotoalbum
43 bilder
Iron Maiden - Aces HighNy: 3 October, 19:05 1:32
Eddie getting comfortable
Prosjekt: Iron Maiden Aces High
11 12 August, 17:43
Edouard Carr
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Sean
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
29 September, 21:49
Stu Perry
la til et nytt fotoalbum
la til et nytt fotoalbum
27 31 December 2023, 17:46
Mr James
My god that is one impressive model scene. I can see hundreds of layers of work to achieve that amount of distress and decay. Truly amazing work
My god that is one impressive model scene. I can see hundreds of layers of work to achieve that amount of distress and decay. Truly amazing work
1 June, 03:18
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo