Nyhetsstrøm
Mr Dla til et nytt fotoalbum
18 bilder
MyAlbum
1:144
A tiny 144 tiger shark it a £4 AliExpress deal
There nice little easy builds and don't need much space.
Comes with load...
Prosjekt: CC Lee F-20 Tiger shark 1:144
14 15 October, 12:22
Mr DThanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.
15 October, 16:58
SkyhikerI think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.
26 October, 20:08
Mr DHi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣
26 October, 23:26
Mr DThanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.
26 October, 23:34
Mr DThanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .
27 October, 16:10
Ben MHahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.
27 October, 16:12
Mr DThanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍
28 October, 11:32
Ben Sla til et nytt fotoalbum
19 10 October, 09:03
Ben SThanks for following folks. This was a difficult build, not least because the quality of the Revell kit wasn't great so there are a few areas I don't love. Nevertheless, from 3 feet away I'm happy with the look of it and got to grips with a few new techniques. Decals (both Quinta and Ze-Ro) are lovely, detail set is great but super fiddly at this scale, kit has tons of flash (especially the rear fillet between the tail and antenna mast).
3 November, 09:20
Master Box 
Rui Sla til et nytt fotoalbum
71 bilder
Outono / Autumn 1944_Jagdpanzer Tiger (P) Elefant
1:35
Prosjekt: Jagdpanzer Tiger (P) Elefant
38 9 March 2015, 02:53
Rui SThank you for your comments. Very old italeri kit. Waited for years for a zimmerit solution...
9 March 2015, 15:53
Rui SKim, Coming from an real Expert in the subject like you, is a great complement, Thanks.
9 March 2015, 19:06
Kim BrandersI'm not an expert, just someone shares the same hooby like you. Keep up the good work mate.
10 March 2015, 07:03
Rui SHeHeHe. For me your work is great, so if not an Expert I'm sure you are a Great modeller.
10 March 2015, 14:46
Rui SThank you very much Timothy. It's on hold, because I thought in put some figurines in the tank and a horse rider or so in the trail next to it. I'm not very good in figurine faces... I've yet to try the oils on them😉
22 March 2015, 01:22
Rui SThank you very much for your kind words Fabian, and Donald... as I wrote the kit waited years for a Zimmerit solution... All my latest projects are missing the figurines hehe...
22 March 2015, 20:22
Tim HeimerHey I know the pain of not doing faces as well, but all we can do is learn from others and do what fits our liking
22 March 2015, 22:50
Rui SAgree. I Think the most important is practice... A lot, with new technics. I'm confident that with oils it's going to be better...
22 March 2015, 22:57
Rui SSome ad on photos. I thought to put some figurines on the side track but for now, I'm going to try a messenger...
20 June 2016, 16:17
Wesley De BraekeleirUbercool!!! Love your work sofare! Very beautiful camo pattern on the elefant! 😉
11 December 2016, 20:30
CaptGPFDamn Rui, that camo pattern is wicked! The mud effects are also impressive!
21 September, 00:14
Mr JamesI agree with CaptGPF, also that tree is really good. What did you use as leaves Rui ?
21 September, 00:42
Rui S@ CaptGPF, Thank you for your comment. I hope you liked that Wicked 😄 😉 this Is an old project that is on hold as well as the photos. I hope to take better photos and complete it.
@ Mr James Thank you for your Nice words. I hope you also liked that Wicked 😄 The tree is a bonsai that had died, I cut some leaves because they were too big. If I remember correctly, I spread small wood shavings and other natural ones that I had in my vegetation stash on the ground.
Also, I thank the new likes. Apreciated
21 September, 11:48
Rui SI'm very happy to say that I've returned to my mancave this weekend after a to long hiatus.
So to start I preferred a lighter job, although painting horses is not, in my opinion, easy.
Let's see what this will give...
29 September, 21:02
Alec KNice to see you back at the bench, and another shelf queen resurrected. Horse looks great imho 👍
30 September, 11:52
DoubtingmangoGreat job breathing life into an old kit, and I can't think of a better use for a dead bonsai tree! Looking forward to the finish!
30 September, 12:22
Rui S@Alec, Thank you for your kind words and support. It is always great for me to receive such encouragement, even more so, when they come from a master modeler.
@Doubtingmango thx mate, I agree with you., but hey, I can only return to my bench on weekends, só it Will take some time to finish. For me the most important thing was getting my mojo back.
@Gorby, Thank you very much my friend, for your motivational words. They are always very important to me.
The horse will still improve, I hope. At least that's what I'll try to do without ruining all the work that has already been done 🤔 😉
30 September, 21:37
Desert MarlinLooks great! The coat should shimmer like a newly minted US penny. (Shiny Copper). I'll follow!!!
4 October, 00:56
Ben MI hate to be the first to inform you, that is not a tiger, nor is it an elephant, it is a horse.
4 October, 01:52
Rui S@Landlubber Mike. Thank you for your comment. Glad you like this one
@Desert Marlin, I know whar you mean. I've been hesitating about highlights with a soft airbrush of satin black or satin varnish on the most exposed surfaces. I hadn't thought about copper. But yes, it will have to have some shine.
@Ben M, Hahaha. Thank you. Your comment with a triple meaning has made me laugh several times, but in my defense I can tell you that this horse It is known as having the strength of an elephant and bites like a tiger. That's why they nicknamed him tiger elephant. 😄
@Kim, thank you very much Mate for stoping bye and comment. Always apreciate your suport.
5 October, 14:11
Rui SWow, this is an unexpected comment. It's always great to receive a compliment from a Master. Thank you so much for stopping by and for those encouraging words. Appreciate it.
6 October, 23:46
Rui SHi Ben, If i reacall corrctely, I gave a little bit of both, sarting with a black primer, overal coats with oils leaving those spots almost unpainted or with less coverage.
7 October, 11:05
Angel YovtshevThese horses were a nice surprise, Rui!
I'm currently fighting the harnesses of a two-horse team pulling a gun carriage(it's a hard fight- I can tell you!).
Your reins look splendid!
Cheers,
Angel
7 October, 19:51
Pietro De AngelisDamn, what a gestation this work has had,
it gives me hope that sooner or later I too will finish something!😅
Congratulations for the scene and for what you managed to do with that old Elefant, the horse is wonderful!
Admiration and respect
7 October, 22:02
Rui S@ Angel Yovtshev, Thank you for stoping by. Mate Your comment was also a nice surprise to me. Apreciated. I'm sure that for a master scratch builder like you, the harnesses will be a piece of cake. Looking forward to see it.
@ Pietro De Angelis, Thx a lot for you praise, really Apreciated. But you are right and If you would know the century I started the Italeri kit... 😄 I'm a slow modeller wich fails to keep the Mojo high for long periods, so, it's nice to make a few more steps to conclusion. I'm glad you like my work on the Elefant and horse.
@Desert Marlin, Thx again for your suport, it means a lot to me. I'm sure you noticed that i've followed your advise and gave it a soft overcoat of satin Varnish on the upper or most exposed surfaces 😉
8 October, 21:32
Mark SherwoodNice work on the Hoss' the shading's brought out the musculature. The camo' on the headless horseman is top notch too. 🤟🥸🤘
17 October, 08:55
Rui SHi, mates, sorry for my late reply, but I prefer to do it with some new uploaded progress photos. Gettting near to the end on this two. Hope you like them.
@ Gary Victory, Thank you very much for stoping by and nice comment;
@ Alec K, Thx again for your words, the rider come back with proud;
@ Doubtingmango, Thx for looking. Now I think he is redy for another kind of Halloween, if you get my drift;
@ Desert Marlin, thank you for your kind words, suport and Encouragement. Apreciated;
@ Mark Sherwood, Thank you for your nice comment. I know nothing about horse anatomy, so I follow the reliefs and I Think I can be happy with the result.
20 October, 22:10
Rui S@ Desert Marlin, Thank you a lot for your Great suport.
Almost done as intended, a few more bits and pieces and I can finaly close this chapter. That makes me very happy.
3 November, 12:16
Xa Charla til et nytt fotoalbum
15 11 May 2023, 22:55
robocopla til et nytt fotoalbum
8 bilder
Focke-Wulf Fw 190A-1
1:72
Converted the Tamiya A-3 to A-1
Prosjekt: Focke-Wulf Fw 190A-1
8 2 November, 20:42
Richard Footla til et nytt fotoalbum
22 22 November 2021, 14:19
SkyhikerVery nice. Did the kit come with the older and longer Pratt & Whitney JT3D engines?
3 November, 11:48
Jan Petersla til et nytt fotoalbum
14 bilder
Type IX C/40 U-190
1:144
Torpedo doors in the open position.
Prosjekt: German Submarine Type IX C/40 (U190)
12 27 October, 18:59
Jan PetersMade a careful start. Parts are a mixed bag, some very nicely done, some a bit crude and oversized.
29 October, 14:59
Matti ThomaesCan't help you there Jan, I didn't even know there was anti-radar material on the snorkel...
3 November, 09:39
Jan PetersI had a go at it, looks more crude in the pictures then it looks in real life, might do some fine tuning later
3 November, 10:48
Franck Drebinla til et nytt fotoalbum
91 19 January 2022, 21:44
Franck DrebinThank you Cuajete, it's a really nice and enjoyable kit, and using Tamiya camouflage decal sheet is helpful when like me, you're not a master of the Airbrush 😊
21 January 2022, 16:16
William JoelNice work, love the camo. The silver finish and panels came out great. Question - why the black primer than the tan?
21 January 2022, 16:24
Franck DrebinThanks William Joel, the black primer was Mr Finishing Surfacer 1500 from Mr Hobby. For the decals and the weathering (very light in fact) I used the Prince August Satin spray varnish. It was the first time I used that products and I'm really happy with the result.
21 January 2022, 16:40
Franck Drebin…sorry William Joel, the black primer is to get a better result with the aluminium color in order to achieve a metallic finish. I often read that but of course, it depends on what you're looking for.
21 January 2022, 17:02
NeilVery nice work indeed Franck 👍 agree with William the camo is outstanding! 🙂
11 February 2022, 11:49
BC NRABeautiful! I have that kit in my stash. Your excellent job on building your Ki61 has inspired me to build that next. (As soon as I finish my IL-2.)
15 April 2022, 18:05
Franck DrebinThank you BC NRA. I'm glad if I encourage you to build this splendid kit. You will enjoy. Thanks Juskifo and Finn too for your comments 👍
15 April 2022, 22:16
John WilkesI bought the 1/48 scale version without the full decals. Freehanding the camo job taught me a new respect for the brush. This is a beautiful aeroplane and your work makes it look great. Thank you for posting your work.
16 April 2022, 02:20
Franck DrebinCopied BC NRA! I will follow that when you will post it.
Thanks Kyle and John. Indeed, doing this camo without decals is a real challenge.
26 May 2022, 22:41
Catalin OpreaNice build, congrats! I didn't expect decals for this cammo 🙂. I did mine with airbrush.
13 July 2022, 18:39
Andy BallAn almost lizard-like look: great way to show off the lines of this fighter. Great job!
29 August 2023, 10:12
Franck DrebinThank you mates. Tamiya decals don't have a good reputation and indeed, they are very thin and challenging by moment. The most diificult part was the fuselage. I had to cut them in two parts to avoid a fatal twist. But at the end, I'm very happy with the result.
14 September 2023, 16:45
Franck DrebinThank you for your kind comments. Good remark Rui. Indeed, it's not mandatory to follow the chronological evolution with the photos 😉
23 September, 06:49
Mark SherwoodNice Hien Frank. Like the camo'. I find Japanese aircraft somewhat under represented in our hobby, it seems a few of us are trying to rectify this. Spot on 🤟🥸🤘
24 September, 12:34
A Kla til et nytt fotoalbum
2 2 November, 09:54
SkyhikerNice f-16. Which kit did you use? I wasn't aware that the CJ's are covered in 'have glass' or is that artistic license?
3 November, 12:09
Jörg Schäferla til et nytt fotoalbum
68 26 October 2022, 14:45
Michael KohlStill absolutely amazing.
One point of criticism though: 23 pics are insufficient. 😉
26 October 2022, 16:39
Jan PetersSuperb modelling work Jörg, and I agree with Michael, 23 pics is quite minimal 🙂
26 October 2022, 17:17
Jörg SchäferDanke.
Ich habe zwei Jahre und vier Monate an dem Modell gearbeitet.
27 October 2022, 04:20
Christian LehmannOutstanding! So many details dispersed over the whole model. Always new things to be dicovered.
27 October 2022, 04:37
Dietmar BogatzkiDafür hast du ein Supermodell gebaut, Jörg.
Und die Bismark Sammelserie kommt auch auf 2 Jahre nur das Ergebnis da 🙁
27 October 2022, 07:08
CaptGPFAnother masterpiece - your eye for details and execution really makes this an engrossing kit. Mike is right, 24 pics are too few, I can imagine spending hours just looking at all of the stuff you have done on this build. Bravo!
11 February, 16:38
Jörg SchäferYour comment makes me proud. I'm happy if my model captivates you.
Damn, I would have taken more pictures. 😉
12 February, 06:52
Jörg SchäferThank you, Chrisswe.
Of course, a lot is possible at a scale of 1:200. 😉
3 November, 07:14
ChrissweI very much admire your work Jörg. You show what an expert can do with the 1:200 scale. Adding crew also makes a big difference for large scale ships. You make me consider building a 1:200 ship but first I must improve my skills and train my patience for a year or longer project 🙂
3 November, 08:55
Jörg SchäferThanks for the comments everyone. I'm glad you like the pot.
Chrisswe. That's right, the crew breathes life and depth into the model and also illustrates what a large ship this is.
I would be very happy if I could inspire you with my favorite scale. And when I see your outstanding Tirpitz, I don't think it will take you that long to start such a mega project.
Have you also read my construction report on the Bismarck?
Baubericht | Album by madtatt (1:200)
There may be one or two tips there.
3 November, 09:52
ChrissweMy German is a little rusty but I think I can follow you report. I'm eyeing the USS Enterprise (CV-6) for a 1:200 build. It will probably not be too hard to start such a project but hard to finish it😅.
3 November, 10:00
Jörg SchäferOh dear, that's right.
I just noticed that I wrote this report in German. It was my first here. That can be changed. 😉
3 November, 12:02
Michał Koziejkofullførte
Legiones Astartes
Leviathan Siege Dreadnought With Claw & Drill Weapons Games Workshop 28mm
31-29 2022 New tool 3 November, 12:03
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=no
35
35
/no/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo