DAP Beaufort Mk.VIII (Special Hobby)
![Album image #1 Album image #1](/albums/img/1/1/0/132110-10105-39-720.jpg)
Plastic sprue #1
![Album image #2 Album image #2](/albums/img/1/1/1/132111-10105-82-720.jpg)
Plastic sprues #2 and #3, plus the clear plastic parts.
![Album image #3 Album image #3](/albums/img/1/1/2/132112-10105-45-720.jpg)
Resin and photoetch! My favorites! 🙂
![Album image #4 Album image #4](/albums/img/1/1/3/132113-10105-95-720.jpg)
Resin conversion for the turret used on the Mk.VIII.
![Album image #5 Album image #5](/albums/img/1/1/4/132114-10105-40-720.jpg)
Cockpit floor and bulkheads.
![Album image #6 Album image #6](/albums/img/1/1/5/132115-10105-78-720.jpg)
Front shelf for observer, navigator, bombadier, etc.
![Album image #7 Album image #7](/albums/img/1/1/7/132117-10105-17-720.jpg)
The Mk.VIII had a larger tail and rudder than the Mk.I and Mk.II, which is what the kit represents.
![Album image #8 Album image #8](/albums/img/1/1/8/132118-10105-52-720.jpg)
Slice off the old one with an RB Productions razor scriber.
![Album image #9 Album image #9](/albums/img/1/1/9/132119-10105-21-720.jpg)
The new one will fit well!
![Album image #10 Album image #10](/albums/img/1/2/0/132120-10105-27-720.jpg)
Starboard fuselage cut to allow installation of the resin turret fairing.
![Album image #11 Album image #11](/albums/img/1/2/1/132121-10105-73-720.jpg)
Compared to port side which hasn't been modified yet.
![Album image #12 Album image #12](/albums/img/1/2/2/132122-10105-34-720.jpg)
A good comparison of the original tail, and the larger Mk.VIII tail.
![Album image #13 Album image #13](/albums/img/4/3/9/132439-10105-44-720.jpg)
Test fitting the cockpit components!
![Album image #14 Album image #14](/albums/img/4/4/0/132440-10105-21-720.jpg)
I think everything is in the right place...
![Album image #15 Album image #15](/albums/img/4/4/1/132441-10105-76-720.jpg)
Closing up the torpedo bay - Aussie Beauforts rarely used torpedoes.
![Album image #16 Album image #16](/albums/img/4/4/2/132442-10105-97-720.jpg)
Kit sidewalls are bare - need to dress them up a bit.
![Album image #17 Album image #17](/albums/img/4/4/3/132443-10105-69-720.jpg)
Any resemblance to a real Beaufort is purely coincidental.
![Album image #18 Album image #18](/albums/img/4/4/4/132444-10105-34-720.jpg)
My special Gunze mix for RAF Interior Grey Green.
![Album image #19 Album image #19](/albums/img/4/4/5/132445-10105-33-720.jpg)
Not finished yet, but headed in the right direction.
![Album image #20 Album image #20](/albums/img/7/3/5/133735-10105-62-720.jpg)
Panel has individual dial decals, leftover PE, and paint applied with a 20/0 brush!
![Album image #21 Album image #21](/albums/img/7/3/6/133736-10105-72-720.jpg)
Color of the knobs on the levers is taken from photos of a Beaufort that is being restored.
![Album image #22 Album image #22](/albums/img/7/3/7/133737-10105-36-720.jpg)
Sneak peek with the fuselage taped together.
![Album image #23 Album image #23](/albums/img/7/3/8/133738-10105-39-720.jpg)
Not sure about the navigator's "cushion." References show a swivel seat here. I'll have to scratch one.
![Album image #24 Album image #24](/albums/img/7/8/6/134786-10105-46-720.jpg)
Navigator's panel painted and decaled, plus I added a map to the navigator's table.
![Album image #25 Album image #25](/albums/img/4/1/7/136417-10105-10-720.jpg)
The bomb bay doors look like they'll line up fine.
![Album image #26 Album image #26](/albums/img/4/1/8/136418-10105-91-720.jpg)
I added some seat belts to the scratch built navigator's chair. You can also see his cushion, for when he's prone in the nose.
![Album image #27 Album image #27](/albums/img/4/1/9/136419-10105-69-720.jpg)
I cut a piece of the clear plastic to use as a retention device - the portholes will not be able to fall into the fuselage.
![Album image #28 Album image #28](/albums/img/4/2/0/136420-10105-20-720.jpg)
I added the navigator's lamp.
![Album image #29 Album image #29](/albums/img/4/2/1/136421-10105-22-720.jpg)
And a bottle of my favorite libation to add some scale!
![Album image #30 Album image #30](/albums/img/1/6/6/139166-10105-50-720.jpg)
Shelf made from styrene card and rod - this will hold the radio boxes.
![Album image #31 Album image #31](/albums/img/1/6/7/139167-10105-44-720.jpg)
Radio boxes made from spare photoetch pieces.
![Album image #32 Album image #32](/albums/img/1/6/8/139168-10105-84-720.jpg)
The radio boxes will just be visible through the canopy.
![Album image #33 Album image #33](/albums/img/1/6/9/139169-10105-36-720.jpg)
Fit of the nacelle to the wing is superb!
![Album image #34 Album image #34](/albums/img/1/7/0/139170-10105-71-720.jpg)
Good job, Special Hobby!
![Album image #35 Album image #35](/albums/img/5/6/3/140563-10105-79-720.jpg)
Radio equipment added behind the pilot.
![Album image #36 Album image #36](/albums/img/5/6/4/140564-10105-63-720.jpg)
Radio equipment added behind the pilot.
![Album image #37 Album image #37](/albums/img/5/6/5/140565-10105-70-720.jpg)
Fuselage halves are joined!
![Album image #38 Album image #38](/albums/img/5/6/6/140566-10105-55-720.jpg)
Need card stock to fill the gap and seal off the fuselage.
![Album image #39 Album image #39](/albums/img/5/6/7/140567-10105-55-720.jpg)
Canopy fits quite well after I add a small shim to spread the fuselage.
![Album image #40 Album image #40](/albums/img/5/6/8/140568-10105-45-720.jpg)
Canopy with its fresh coat of Future.
![Album image #41 Album image #41](/albums/img/5/6/9/140569-10105-62-720.jpg)
This section of the glazing is undersize! May need to replace it.
![Album image #42 Album image #42](/albums/img/5/7/0/140570-10105-34-720.jpg)
An alignment jig for a Hurricane prop fits perfectly!
![Album image #43 Album image #43](/albums/img/5/7/1/140571-10105-79-720.jpg)
Props finished!
![Album image #44 Album image #44](/albums/img/5/7/2/140572-10105-73-720.jpg)
Gunner's perch.
![Album image #45 Album image #45](/albums/img/5/7/3/140573-10105-59-720.jpg)
Cute little seat, eh?
![Album image #46 Album image #46](/albums/img/2/3/0/141230-10105-31-720.jpg)
Wings and tailplanes are on! Now she looks the part.
![Album image #47 Album image #47](/albums/img/2/3/1/141231-10105-43-720.jpg)
Still need to add the resin engines and cowlings.
![Album image #48 Album image #48](/albums/img/7/0/0/142700-10105-93-720.jpg)
The bird has legs!
![Album image #49 Album image #49](/albums/img/7/0/1/142701-10105-37-720.jpg)
Not easy to understand the instructions, but I think I assembled the landing gear correctly.
![Album image #50 Album image #50](/albums/img/7/0/2/142702-10105-91-720.jpg)
![Album image #51 Album image #51](/albums/img/7/0/3/142703-10105-89-720.jpg)
Need to fill a rather large gap in the canopy. Surprised at this, everything else fits great!
![Album image #52 Album image #52](/albums/img/7/0/4/142704-10105-11-720.jpg)
A few slices of styrene card stock...
![Album image #53 Album image #53](/albums/img/7/0/5/142705-10105-12-720.jpg)
...and that will do the trick, I think!
![Album image #54 Album image #54](/albums/img/4/0/6/143406-10105-73-720.jpg)
Gussets and corrugations added to the dorsal turret fairing.
![Album image #55 Album image #55](/albums/img/4/0/7/143407-10105-62-720.jpg)
Bomb aimer's window added and blended into the fuselage. Had to bend the clear plastic into a "v" to make it fit.
![Album image #56 Album image #56](/albums/img/4/0/8/143408-10105-21-720.jpg)
Two fresh Pratt & Whitney Double Wasps. Oh, and a Eurobuck.
![Album image #57 Album image #57](/albums/img/4/0/9/143409-10105-26-720.jpg)
Engine fits quite snugly in the cowling.
![Album image #58 Album image #58](/albums/img/4/1/0/143410-10105-28-720.jpg)
Punch a couple of holes up front for the machine guns.
![Album image #59 Album image #59](/albums/img/4/1/1/143411-10105-49-720.jpg)
Added the bomb aimer's plotting surface device thingy. Right above the lamp in the photo.
![Album image #60 Album image #60](/albums/img/9/1/1/143911-10105-27-720.jpg)
Two Vickers GO machine guns "borrowed" from the new tool Airfix Blenheim Mk.I kit.
![Album image #61 Album image #61](/albums/img/9/1/2/143912-10105-44-720.jpg)
Main gear doors made from Brengun PE set. Slab of gray plastic is the kit door!
![Album image #62 Album image #62](/albums/img/9/1/3/143913-10105-33-720.jpg)
Engines and cowlings added, along with the cooling air inlets.
![Album image #63 Album image #63](/albums/img/9/1/4/143914-10105-89-720.jpg)
Now she's really starting to look like an aeroplane!
![Album image #64 Album image #64](/albums/img/4/9/1/144491-10105-26-720.jpg)
Time for a small alteration!
![Album image #65 Album image #65](/albums/img/4/9/2/144492-10105-78-720.jpg)
Very prominent lights on the Beaufort. The entire wingtip was plexiglas.
![Album image #66 Album image #66](/albums/img/4/9/3/144493-10105-96-720.jpg)
And on the port side. Plus, a large cut-out for the landing lights in the leading edge of the wing.
![Album image #67 Album image #67](/albums/img/4/9/4/144494-10105-20-720.jpg)
Adding a strip of styrene to each cowling to reduce the inside diameter.
![Album image #68 Album image #68](/albums/img/6/4/5/145645-10105-24-720.jpg)
How to make wing lights from plastic silverware - drill small holes and paint the colour of the lamps.
![Album image #69 Album image #69](/albums/img/6/4/6/145646-10105-64-720.jpg)
Use strong superglue to hold in place. It does NOT have to look pretty. Fill in any gaps with superglue.
![Album image #70 Album image #70](/albums/img/6/4/7/145647-10105-12-720.jpg)
Use sanding sticks to form the clear plastic into the shape of the wing.
![Album image #71 Album image #71](/albums/img/6/4/8/145648-10105-78-720.jpg)
Use finer grit sanding for each step. Then Micro-Mesh up to 12,000 grit, which is a polish.
![Album image #72 Album image #72](/albums/img/6/4/9/145649-10105-50-720.jpg)
Und die Unterseite. Very effective little trick, and it doesn't take much time.
![Album image #73 Album image #73](/albums/img/1/3/4/150134-10105-12-720.jpg)
Boxing in the landing light area with styrene card.
![Album image #74 Album image #74](/albums/img/1/3/5/150135-10105-49-720.jpg)
Starboard side navigation lights.
![Album image #75 Album image #75](/albums/img/1/3/6/150136-10105-83-720.jpg)
Paint test strip for RAAF Foliage Green. Second from left is the winner!
![Album image #76 Album image #76](/albums/img/1/3/7/150137-10105-83-720.jpg)
Blackened the edge of the canopy.
![Album image #77 Album image #77](/albums/img/1/3/8/150138-10105-43-720.jpg)
Forgot the divider! Good thing I caught that now.
![Album image #78 Album image #78](/albums/img/1/3/9/150139-10105-15-720.jpg)
Drilled out the fuel dumps.
![Album image #79 Album image #79](/albums/img/1/4/0/150140-10105-79-720.jpg)
Added the Vickers gun to the canopy. Barrels go on later so I don't break them off!
![Album image #80 Album image #80](/albums/img/1/4/1/150141-10105-67-720.jpg)
Drilled opening in turret for Browning machine guns.
![Album image #81 Album image #81](/albums/img/1/4/2/150142-10105-98-720.jpg)
Canopy attached with white glue.
![Album image #82 Album image #82](/albums/img/1/4/3/150143-10105-26-720.jpg)
And masked up so I can blend the seams.
![Album image #83 Album image #83](/albums/img/1/4/4/150144-10105-37-720.jpg)
Spackle (Pollyfilla) applied to the seam.
![Album image #84 Album image #84](/albums/img/1/4/5/150145-10105-87-720.jpg)
Sanded down with 800 and 2,000 grit paper. Dry sanded, not wet!
![Album image #85 Album image #85](/albums/img/1/4/6/150146-10105-31-720.jpg)
Montex masks applied, followed by a coat of Future and then Interior Grey Green.
![Album image #86 Album image #86](/albums/img/1/4/7/150147-10105-64-720.jpg)
Finally! She's green!
![Album image #87 Album image #87](/albums/img/1/4/8/150148-10105-44-720.jpg)
This is just the base coat, post shading to follow.
![Album image #88 Album image #88](/albums/img/1/4/9/150149-10105-71-720.jpg)
The green paint is Gunze H302.
![Album image #89 Album image #89](/albums/img/1/5/0/150150-10105-26-720.jpg)
Rear portholes painted over, except for a thin strip representing the shutter.
![Album image #90 Album image #90](/albums/img/4/5/7/150457-10105-38-720.jpg)
Scratchbuilding the fuel vents - the card stock will be sanded to final shape after the glue dries.
![Album image #91 Album image #91](/albums/img/4/5/8/150458-10105-64-720.jpg)
Fuel vents and D/F aerial base attached. Port fuel vent is farther back on the wing on the actual plane, too.
![Album image #92 Album image #92](/albums/img/4/5/9/150459-10105-53-720.jpg)
Post shading with a lighter blend of Foliage Green.
![Album image #93 Album image #93](/albums/img/4/6/0/150460-10105-21-720.jpg)
More post shading.
![Album image #94 Album image #94](/albums/img/4/6/1/150461-10105-78-720.jpg)
Main gear tyres are ready to go!
![Album image #95 Album image #95](/albums/img/9/5/3/150953-10105-80-720.jpg)
Tyres are on and some paint touch-up done.
![Album image #96 Album image #96](/albums/img/9/5/4/150954-10105-48-720.jpg)
Coming at you!
![Album image #97 Album image #97](/albums/img/9/5/5/150955-10105-79-720.jpg)
I think it's time for the markings.
![Album image #98 Album image #98](/albums/img/3/4/1/151341-10105-45-720.jpg)
Transfers on...
![Album image #99 Album image #99](/albums/img/3/4/2/151342-10105-24-720.jpg)
Pastel work on the panels...
![Album image #100 Album image #100](/albums/img/3/4/3/151343-10105-83-720.jpg)
Landing lights emerged unscathed...
![Album image #101 Album image #101](/albums/img/3/4/4/151344-10105-73-720.jpg)
Added "kangaroo catcher" to main landing gear...
![Album image #102 Album image #102](/albums/img/3/4/5/151345-10105-52-720.jpg)
Flat varnish applied...I think it looks OK!
![Album image #103 Album image #103](/albums/img/3/4/7/151347-10105-94-720.jpg)
Wash applied to main gear doors, but not cleaned up yet. Kit doors were just bare slabs of plastic.
![Album image #104 Album image #104](/albums/img/3/4/8/151348-10105-68-720.jpg)
Let me tell you, the photoetch fins on this bomb were big time fiddly!
![Album image #105 Album image #105](/albums/img/5/6/8/152568-10105-38-720.jpg)
Landing lights added from Marabu Designs photoetch.
![Album image #106 Album image #106](/albums/img/5/6/9/152569-10105-64-720.jpg)
Take an extra Grumman F7F Tigercat vacuform canopy...
![Album image #107 Album image #107](/albums/img/5/7/0/152570-10105-14-720.jpg)
Cut it to size...
![Album image #108 Album image #108](/albums/img/5/7/1/152571-10105-23-720.jpg)
Paint a frame around it to hide the superglue...
![Album image #109 Album image #109](/albums/img/5/7/2/152572-10105-60-720.jpg)
Viola! Close enough for me.
![Album image #110 Album image #110](/albums/img/5/7/3/152573-10105-75-720.jpg)
Not completely authentic, but better than the "nothing" provided by Special Hobby.
![Album image #111 Album image #111](/albums/img/8/5/7/152857-10105-20-720.jpg)
Gear doors are on!
![Album image #112 Album image #112](/albums/img/8/5/8/152858-10105-76-720.jpg)
The doors are from the Brengun photoetch set.
![Album image #113 Album image #113](/albums/img/8/5/9/152859-10105-82-720.jpg)
Exhaust header is painted Gunze Steel Red.
![Album image #114 Album image #114](/albums/img/8/6/0/152860-10105-10-720.jpg)
Very tiny photoetch on the inside of the doors - these engaged with the structure on the front of the landing gear to shut the doors.
![Album image #115 Album image #115](/albums/img/8/6/1/152861-10105-56-720.jpg)
The photoetch ASV antennae and a 0.015" wood drill. 16 of these antennae go on the fuselage sides.
![Album image #116 Album image #116](/albums/img/8/6/2/152862-10105-39-720.jpg)
I cringed drilling these holes!
![Album image #117 Album image #117](/albums/img/8/6/3/152863-10105-31-720.jpg)
But it all came out OK!
![Album image #118 Album image #118](/albums/img/8/6/4/152864-10105-19-720.jpg)
Holy dipole jungle, Batman!
![Album image #119 Album image #119](/albums/img/8/6/5/152865-10105-48-720.jpg)
I can never pick up the model by the fuselage again.
![Album image #120 Album image #120](/albums/img/8/6/6/152866-10105-21-720.jpg)
![Album image #121 Album image #121](/albums/img/8/6/7/152867-10105-31-720.jpg)
![Album image #122 Album image #122](/albums/img/8/6/8/152868-10105-36-720.jpg)
![Album image #123 Album image #123](/albums/img/8/6/9/152869-10105-47-720.jpg)
![Album image #124 Album image #124](/albums/img/3/1/0/154310-10105-76-720.jpg)
Bomb racks from resin and photoetch. Nicely done, Special Hobby!
![Album image #125 Album image #125](/albums/img/3/1/1/154311-10105-71-720.jpg)
Somehow I even managed to get things aligned properly.
![Album image #126 Album image #126](/albums/img/3/1/2/154312-10105-52-720.jpg)
Bombs were painted dark green, and then "dirtied up" with pastels.
![Album image #127 Album image #127](/albums/img/3/1/3/154313-10105-24-720.jpg)
Hard to see under the wing!
![Album image #128 Album image #128](/albums/img/3/1/4/154314-10105-26-720.jpg)
Photoetch probes added to sides of forward fuselage.
![Album image #129 Album image #129](/albums/img/3/1/5/154315-10105-17-720.jpg)
Probe under the nose added from a photoetch standoff and a small piece of hypo needle.
![Album image #130 Album image #130](/albums/img/7/8/0/154780-10105-44-720.jpg)
Small PE circular grommet added to both fuselage sides - this will hold the whisker antennae.
![Album image #131 Album image #131](/albums/img/7/8/1/154781-10105-56-720.jpg)
Painted the turret frames - the Montex masks worked great!
![Album image #132 Album image #132](/albums/img/7/8/2/154782-10105-92-720.jpg)
Aye Carumba! I forgot about the machine guns in the leading edge of the wings!
![Album image #133 Album image #133](/albums/img/7/8/3/154783-10105-72-720.jpg)
Drilled a hole in the port wing...
![Album image #134 Album image #134](/albums/img/7/8/4/154784-10105-28-720.jpg)
And the starboard wing - I was holding my breath while doing this!
![Album image #135 Album image #135](/albums/img/7/8/5/154785-10105-16-720.jpg)
And I added the drift sight bracket to the starboard forward fuselage side.
![Album image #136 Album image #136](/albums/img/5/1/1/155511-10105-92-720.jpg)
Hypo needle tubes added to represent the guns.
![Album image #137 Album image #137](/albums/img/5/1/2/155512-10105-51-720.jpg)
High voltage transmitters ("whiskers") added to the sides of the nose.
![Album image #138 Album image #138](/albums/img/5/1/3/155513-10105-56-720.jpg)
Very fiddly - don't touch! 🙂
![Album image #139 Album image #139](/albums/img/5/1/4/155514-10105-55-720.jpg)
Photoetch Yagi aerials and resin supports - the supports have to be modified for use with these antennae.
![Album image #140 Album image #140](/albums/img/5/1/5/155515-10105-80-720.jpg)
Like this! Not 100% authentic, but will look better when combined with the PE antennae.
![Album image #141 Album image #141](/albums/img/5/1/6/155516-10105-24-720.jpg)
Resin supports mounted to wings - these mounts "toe out" at an angle of 20 degrees.
![Album image #142 Album image #142](/albums/img/5/1/7/155517-10105-22-720.jpg)
Antennae added! Because we didn't have enough antennae on this model!
![Album image #143 Album image #143](/albums/img/5/1/8/155518-10105-65-720.jpg)
Looks like my old roof-mounted TV antenna...
![Album image #144 Album image #144](/albums/img/5/1/9/155519-10105-69-720.jpg)
Now the model is even MORE difficult to pick up!
![Album image #145 Album image #145](/albums/img/5/2/0/155520-10105-84-720.jpg)
Starboard Yagi antennae.
![Album image #146 Album image #146](/albums/img/5/2/1/155521-10105-92-720.jpg)
This shot shows the 20 degree angle well.
![Album image #147 Album image #147](/albums/img/5/2/2/155522-10105-57-720.jpg)
The view from below!
![Album image #148 Album image #148](/albums/img/5/8/8/155588-10105-80-720.jpg)
Yagi aerials in the right position now!
![Album image #149 Album image #149](/albums/img/5/8/9/155589-10105-37-720.jpg)
Added the seat for the gunner. This had broke off and was stuck inside someplace, but it broke free today.
![Album image #150 Album image #150](/albums/img/1/3/1/156131-10105-96-720.jpg)
![Album image #151 Album image #151](/albums/img/1/3/2/156132-10105-47-720.jpg)
![Album image #152 Album image #152](/albums/img/1/3/3/156133-10105-50-720.jpg)
![Album image #153 Album image #153](/albums/img/1/3/4/156134-10105-75-720.jpg)
![Album image #154 Album image #154](/albums/img/1/3/5/156135-10105-59-720.jpg)
![Album image #155 Album image #155](/albums/img/1/3/6/156136-10105-63-720.jpg)
![Album image #156 Album image #156](/albums/img/1/3/7/156137-10105-35-720.jpg)
Finished!
![Album image #157 Album image #157](/albums/img/1/3/8/156138-10105-88-720.jpg)
![Album image #158 Album image #158](/albums/img/1/3/9/156139-10105-29-720.jpg)
![Album image #159 Album image #159](/albums/img/1/4/0/156140-10105-58-720.jpg)
![Album image #160 Album image #160](/albums/img/1/4/1/156141-10105-86-720.jpg)
![Album image #161 Album image #161](/albums/img/1/4/2/156142-10105-88-720.jpg)
![Album image #162 Album image #162](/albums/img/1/4/3/156143-10105-49-720.jpg)
![Album image #163 Album image #163](/albums/img/1/4/4/156144-10105-20-720.jpg)
![Album image #164 Album image #164](/albums/img/1/4/5/156145-10105-52-720.jpg)
![Album image #165 Album image #165](/albums/img/1/4/6/156146-10105-39-720.jpg)
![Album image #166 Album image #166](/albums/img/1/4/7/156147-10105-76-720.jpg)
![Album image #167 Album image #167](/albums/img/1/4/8/156148-10105-63-720.jpg)
![Album image #168 Album image #168](/albums/img/1/4/9/156149-10105-69-720.jpg)
![Album image #169 Album image #169](/albums/img/1/5/0/156150-10105-62-720.jpg)
![Album image #170 Album image #170](/albums/img/1/5/1/156151-10105-59-720.jpg)
![Album image #171 Album image #171](/albums/img/1/5/2/156152-10105-69-720.jpg)
Kommentarer
28 30 August 2014, 16:02
![](/profiles/img/10105-s.jpg)
Hi mates! I've started my next project, the DAP (Bristol) Beaufort Mk.VIII bomber in the markings of the RAAF. This is a bit different than what I normally model, so that makes it even more fun. I've posted a few photos to show you the very beginning of the build. I have some Beaufort experts from the Commonwealth guiding me on this one, so I shouldn't do anything really stupid! Enjoy!
30 August 2014, 16:14
![](/profiles/img/10976-s.jpg)
A real rear subject. I am keen to see what you do with this kit.
30 August 2014, 16:21
![](/profiles/img/10792-966-s.jpg)
Interesting subject. I did not know that DAP produced the Beaufort as well. I'am leaning back and let me entertain.
30 August 2014, 16:42
![](/profiles/img/10105-s.jpg)
Thanks everyone! Great encouragement from my Scalemates! This project may be interrupted every now and then. I will post a separate message to let you know my situation.
30 August 2014, 21:10
![](/profiles/img/10105-s.jpg)
Some new photos have been uploaded - the cockpit is slowly being worked on, but I think it's looking OK. Every now and then I have to stop work so I can ask some Aussie Beaufort experts what something is, what it does, what colour is it...I wish the Special Hobby instructions were more complete. They knew enough to mould something, surely they know enough to tell me what colour to paint it! 🙂
1 September 2014, 12:46
![](/profiles/img/10105-s.jpg)
A bit more work done on the cockpit. The instrument panel has been added (love the axe!) along with the control panel on the starboard side of the seat. Special Hobby would have you install that one backwards - be careful if you're building this kit. Cheers!
7 September 2014, 14:37
![](/profiles/img/10105-s.jpg)
The panel above the navigator's shelf is for radio gear. Special Hobby has molded this quite poorly, but we'll dress it up. It looks like I will also have to spread the fuselage just a wee bit in order to make the greenhouse fit properly. I was worried about that, it could have been a lot worse! 🙂
7 September 2014, 14:42
![](/profiles/img/10792-966-s.jpg)
clean and sharp as usual Bill! That comes out really nice. Looking forward to your progress. All the best, Christian
7 September 2014, 20:07
![](/profiles/img/10105-s.jpg)
Hi mates, I painted the navigator's panel and added some decals from the spares box to dress it up a bit. I also found a nice map on-line which shows the Japanese campaigns against Australia, and I thought that would be a nice map for the crew of the Beaufort to have. Especially since it has all of the answers already filled in! I brought the image of the map into CorelDraw, and printed it out at a scale 18" in length (1/4" or 6mm in real life). Surprisingly enough, my printer's resolution was high enough that I can make out the shape of Australia, plus I can see the arrows representing the movements of the Japanese forces. Cool! Cheers for now, Bill
15 September 2014, 01:33
![](/profiles/img/11646-s.jpg)
lovely work Bill. Look forward to seeing more.
Interestingly enough I make the Beaufort in 1/144 and this (Scotty's Homin' Pidgin" ) is one of the planes on my decal sheet along with the" Barmer Waikerie" on too.
15 September 2014, 05:34
![](/profiles/img/10105-s.jpg)
I've added some new photos of the Beaufort build. Progress is slow, but at least forward! The problem is that there is so much glass up front, I keep thinking of more details that must be added!
27 September 2014, 00:25
![](/profiles/img/10105-s.jpg)
Some modelling therapy today! It was nice to work on the Beaufort a bit instead of thinking about my cancer treatment options!
I built a shelf to hold the radio boxes, which I made from some spare photoetch pieces. Now I think I'm ready to button up the fuselage. I also posted some photos of my test-fitting of the nacelle to the wing - excellent fit, especially for a short run kit. Great job, Special Hobby!
Cheers for now, Bill
10 October 2014, 03:45
![](/profiles/img/10208-392-s.jpg)
Hello Bill,
this looks absolutely great and i follow you until its finished and then next stop is the Spitfire.
10 October 2014, 04:13
![](/profiles/img/10792-966-s.jpg)
Very nice progress. Makes fun to look at! Thx for sharing, Cheers, Christian
10 October 2014, 17:33
![](/profiles/img/10105-s.jpg)
Some new photos added as my increasingly slow progress continues... 🙂
15 October 2014, 23:16
![](/profiles/img/10876-504-s.jpg)
Hi Bill, re under size window. what about adding evergreen strip? It will be painted in the framework colour I assume. Great build.
16 October 2014, 02:17
![](/profiles/img/10105-s.jpg)
Thanks, mates!
Good idea about adding an Evergreen strip, Bill. The one concern I have is strength, as once it's all together there will be some filling and sanding (maybe) and of course painting masks going on and off. I think I will have that problem no matter what I do!
Michael, the magic adhesive is air. The canopy is just sitting on the fuselage in that shot, it hasn't been attached yet. Soon though!
16 October 2014, 21:34
![](/profiles/img/11453-615-s.jpg)
Hi Bill, I have that kit, so I'm watching with interest. Love your profile shot, by the way - but detected no smell of elderberry! Also interesting to see someone other than an Aussie tackle an Aussie aircraft. Did you "Future" the cockpit? It looks superb!
17 October 2014, 08:39
![](/profiles/img/10232-810-s.jpg)
Hey Bill, feels good to see you at the bench!
Exentric build, i havent expected anything else!😢
17 October 2014, 09:08
![](/profiles/img/10105-s.jpg)
Hi Roger, the canopy has had its Future bath. I've been corresponding with a mate in Australia who is guiding me on this build. Special Hobby have mixed some things up. The resin fuselage insert is the one used with the late version VE turret. The clear parts for that turret are included, but unfortunately none of the decal options used that turret. They all used the intermediate version V, which S-H also provide the clear parts for. But, I will need to modify the resin insert to look quite different. Or, I change markings. Decisions, decisions...
Hi Holgar, it's good to be back at the bench. I try to find some time in-between all the medical stuff. And you're right, I tend to choose some obscure subjects.
17 October 2014, 14:00
![](/profiles/img/11453-615-s.jpg)
Must find out what the equivalent of "Future" is in Australia - I'll go trawling through the floor polish aisle....
From the little I know about DAF, GAF, CAC aircraft, it seems that they changes specification on the fly, and it would only be a regimented "rivet-counter" who would pick you up on that. During a recent trip to New Zealand (Warbirds over Wanaka) we chatted with a restoration guy in the NZ museum, and they may have even been more prone to changing specifications on the fly. Regardless of all that, I look forward to seeing your build progress, in the hope that it may wrench me out of my current episode of Modellers' Block.
18 October 2014, 06:35
![](/profiles/img/10803-s.jpg)
Intersting subject and very nice start! This will be another beauty made by you!
18 October 2014, 08:56
![](/profiles/img/10105-s.jpg)
My bottle of Future (US) is called "Pledge Floor Care Tile & Vinyl Floor Finish with Future Shine." There is also a version for wood floors, but don't get that one (bottles are almost identical). You want the one for tile and vinyl floors. They may have changed the name again to "Pledge Floor Care Finish." If you search for Future on their web site, that's what comes up.
In Australia, this was called "Pledge OneGo" but that was replaced by "Pledge Floor Care Multi-Surface Finish" which I've read is the same thing. Have you tried that Michael? Here is an Australian web site that sells it:
polish-up.com.au/pro..ml-free-postage.html
800 ml for $23, not cheap but probably less than what Sprue Brothers was charging.
19 October 2014, 00:24
![](/profiles/img/10105-s.jpg)
Hey, it's got wings! Looking more like a proper aeroplane, methinks. 🙂
20 October 2014, 01:56
![](/profiles/img/11453-615-s.jpg)
Hi Bill, thanx for the tips on "Future" - I'll hunt around and see I can get! 🙂
20 October 2014, 09:29
![](/profiles/img/10105-s.jpg)
More painfully slow progress - but at least she's up on her own feet now, and we're beginning to get the front greenhouse on and blended in. I've posted a few more pictures. I wish I would hurry up, I want to see some RAAF Foliage Green paint on this fuselage! 🙂
27 October 2014, 01:26
![](/profiles/img/13641-502-s.jpg)
Nice looking build.
Btw.: what's this brownish putty you're using?
27 October 2014, 12:14
![](/profiles/img/10105-s.jpg)
Thanks, folks!
Lukasz, the putty that I use is called Nitro-Stan Red Glazing & Spot Putty. Here is a link:
shopforpaint.com/Nit..category_id/209.html
It's an automotive body repair putty. I use it because it feathers to the most beautiful edge you've ever seen when sanding. It shrinks a bit as it cures, so I often have to do more than one application. It's worth it, though, the stuff is just so smooth. I'm not sure if this is sold outside of North America, but there must be something similar in Europe and Asia.
I can buy a 1 pound tube for about $15 locally. Trust me, that big of a tube lasts for decades! It can be "sanded" with Mr. Color Thinner, too. That helps when you're trying to sand a seam that is difficult to get at. Just dip an ear bud into Mr. Color Thinner, and rub it against the puttied seam. Mr. Color Thinner won't harm the plastic (don't use lacquer thinner!).
Nitro-Stan has been in use since the 1930s. I started using this putty way back when I was a kid in the 1960s. I told my Dad that I needed him to take me to the Hobby Shop to get some putty (this was the first time I learned about filling seams). He went into the garage and came back with a tube of Nitro-Stan. He'd do anything to keep me out of the Hobby Shop! 🙂 🙂
27 October 2014, 15:13
![](/profiles/img/10792-966-s.jpg)
Nice to see you're moving forward with this one Bill! Very nice and clean as usual. Cheers, Christian
27 October 2014, 18:36
![](/profiles/img/10105-s.jpg)
Hi mates - some more progress. I painted up the resin engines, and added a wash. It's a pity they don't photograph so well, they look quite sharp with your naked eye. I added the navigator/bomb aimer's plotting device to the forward cockpit, and I drilled two holes in the canopy for the nose gun barrels to stick out of of. Engines and cowlings are going on next - then the canopy (after my mate in Oz answers a question for me).
30 October 2014, 01:13
![](/profiles/img/16661-726-s.jpg)
Absolutely amazing what you did to rhat cockpit and Navigators seat ! I love that little Lamp and the Map ,
brilliant work in this tiny scale, I figured it to be 1/48 at first sight !
30 October 2014, 14:14
![](/profiles/img/10105-s.jpg)
Thanks folks! New pictures added - I used the two extra Vickers guns from the new Airfix Blenheim kit for the nose guns. Special Hobby give you two Brownings for the nose, but that is not right. I've mounted the engines, cowlings, and cooling air inlets too. She looks like an aeroplane now!
I built up the photoetch main gear doors, which I'll use instead of the plain plastic doors that come with the kit. The PE doors are nicely detailed, and include some extra pieces that look like brackets or guards. They look pretty cool, and you can see them on photos of some, but not all, Beauforts. I have no clue what they are for! Cheers!
2 November 2014, 02:44
![](/profiles/img/10803-s.jpg)
Hi Bill! I like Special Hobby Kits and I like the way You are building them. Perfect work mate!
2 November 2014, 19:10
![](/profiles/img/10105-s.jpg)
A few new pictures have been added which document some changes I made so the model is more accurate. First, the entire wingtip on the Beaufort was Perspex, or Plexiglas, and featured very prominent lights. I used my razor saw to remove the areas where the lights should be. I need to add some clear plastic to represent the lights. I also cut a large notch into the leading edge of the port wing for the landing lights. Why SH didn't include these is a mystery.
I then added a strip of styrene to be used as a "lip" around the opening of the cowling. I did this because the opening is too large, and doesn't have a lip, which it should. Things will look much better now! Cheers!
2 November 2014, 23:12
![](/profiles/img/11503-886-s.jpg)
Hehe looking good Bill, I think they miss things to keep us on our toes..
2 November 2014, 23:28
![](/profiles/img/10105-s.jpg)
Hi mates, Today I spent some time making the lights for the wingtips, and the landing lights in the leading edge of the wing. I posted some pictures that show how I used some clear plastic silverware to make the wingtip lights. I'm sure you've done this yourself, or seen it done before. It's an effective little trick, especially in 1:72 scale. I boxed in the area in the leading edge of the wing for the landing lights, but I think that is as far as I can go right now. I saw some very nice PE from Marabu that is for 1:72 British landing lights, and it includes the arc holder.
British landing lights (Marabu M72002, 1:72)
Very cool, and I will have to order some. Cheers!
8 November 2014, 03:39
![](/profiles/img/10105-s.jpg)
More work done on the Beaufort - but at least she's finally got a coat of Foliage Green on her. More paint work to come, but I'm glad I've moved to that stage. I didn't think I was ever going to get there! I've posted several pictures to show the progress. Cheers, Bill
30 November 2014, 13:43
![](/profiles/img/10792-966-s.jpg)
Hi Bill, good to see your progress on this! Looking forward to more paint work to bring some live to the the Foliage Green!
30 November 2014, 16:27
![](/profiles/img/10876-504-s.jpg)
Wonderful to see it with paint Bill, great build. Hope you are in good spirit, thinking of you, all the best.
30 November 2014, 21:47
![](/profiles/img/11453-615-s.jpg)
Haven't caught up on this in a while, but it's looking good, Bill.
Another modeller in my club used foliage green when doing some Beaufighters. It's a very "Solid" colour, isn't it?
Love your detail work under that green, and wonder about the black edging on the canopy. How did that come about?
1 December 2014, 08:42
![](/profiles/img/10105-s.jpg)
Thanks, everyone. The Foliage Green is Gunze H302, and I'll be doing some post-shading on top of it. The black edge to the canopy was applied with a wide, flat permanent marker. You have to be careful to use white glue when you attach the canopy, as it won't cause the black ink to run. Superglue will. I only add the black edge if I'm concerned that you may be able to look through the canopy and see the bottom edge (which will "sparkle"😢. A little bit of black kills that effect.
2 December 2014, 02:32
![](/profiles/img/10105-s.jpg)
Some more work on the Beaufort - I've added two scratchbuilt fuel vents, attached the D/F aerial base (takes the place of the typical football antenna - the actual deployed aerial will be added with photoetch) and I've done some post shading on the Foliage Green paint. It's coming along, I wish I could spend more time on it, but I am very fatigued from the chemotherapy and have to rest a lot. Enjoy the new photos that I've posted. Cheers!
3 December 2014, 02:34
![](/profiles/img/11956-755-s.jpg)
Very nice build so far!
Pretty funny, I always complain that I can't handle PE-parts on my 1/35 scale tanks because they are so tiny. Now I see you adding PE to 1/72 scale airplanes and it all looks so perfect. That makes me want to put the scale models aside and start a Lego-kit.... 🙂
Oh and: KEEPFIGHTINGBILL!!
3 December 2014, 11:50
![](/profiles/img/10189-s.jpg)
Such a pleasure watching your Beaufort coming alive step-by-step. 👍👍👍
6 December 2014, 11:57
![](/profiles/img/14298-181-s.png)
Time lapse is great to see, and what a pearl. You have bought an otherwise dull aircraft to life with all the most wonderful detail. Just great. 🙂 KC
6 December 2014, 12:12
![](/profiles/img/10105-s.jpg)
Thanks everyone! I appreciate the nice comments. Tyres are mounted, and I've done a bit of paint touch-up. The wheel wells and landing light area are now British Interior Grey-Green, and the clear gloss has gone on in preparation for the transfers. A couple of new photos have been uploaded.
I want to get the decals done and some matt varnish on so that I can take off the canopy masks. They've been on a long time, and I would like them off before round two of chemotherapy next week. After that, I'll be down for a week or so and probably won't get anything done.
6 December 2014, 16:39
![](/profiles/img/10792-966-s.jpg)
Good to see you're making progress in both, modelmaking and fighting the cancer. All the best for your next therapy Bill. Cheers, Christian
6 December 2014, 19:15
![](/profiles/img/10803-s.jpg)
Excellent Bill! You know how to bring Special Hobby kits to life! Great work mate!
6 December 2014, 19:52
![](/profiles/img/10148-258-s.jpg)
Great work and great pictures Bill! I am really looking forward to see the masking removed... I wish you all the best.
6 December 2014, 19:59
![](/profiles/img/14265-431-s.jpg)
I had to check a 2nd time. That's 1:72!!!
I shouldn't be amazed ... it's build by you.
6 December 2014, 23:45
![](/profiles/img/10105-s.jpg)
Now she's looking the part - decals on, flat varnish applied, some pastels on the panel lines. I've also removed the masks from the canopy, so Roland should be happy! I had to make some "kangaroo catchers" to add to the main landing gear. These are very prominent on the real aircraft, so they have to be there. Brengun provided part of them in their photoetch set, but not the whole thing. I think they are really meant to engage the gear doors and pull them shut when the gear retracts. Cheers!
9 December 2014, 00:14
![](/profiles/img/10232-810-s.jpg)
Simply brilliant what you make here, Uncle Bill!
Its really damn phucking good!😄
9 December 2014, 13:53
![](/profiles/img/10792-966-s.jpg)
very very nice. I like it if someone is able to bring a one tone scheme to life like you did on this bird!
9 December 2014, 17:57
![](/profiles/img/17334-510-s.jpg)
Encore did an excellent RAAF Beaufort with etched brass antennae and decals for 4 machines
9 December 2014, 19:31
![](/profiles/img/14265-431-s.jpg)
Hey, looks like you are a true Euro Modeller 🙂
Beautiful plane!!!!!!!!
9 December 2014, 20:45
![](/profiles/img/10105-s.jpg)
Thanks, everyone! Marc, what does it mean to be a true Euro Modeller? Is it because I use a Euro coin in some of my pictures? 🙂
Regarding the antennae, Special Hobby provide them all in photoetch brass as part of the kit. And they look super fiddly! Right now, I'm trying to determine the correct order to add the rest of the parts, in order to minimize the risk of breaking things off. I think it is inevitable, though, that some of these fiddly bits will be knocked off and have to be put back on. These things are so tiny!
9 December 2014, 21:01
![](/profiles/img/14265-431-s.jpg)
You got it ... 🙂
Couldn't resist it. Actually I appreciate it as I know the scale.
9 December 2014, 21:27
![](/profiles/img/14298-181-s.png)
Every time I see such fine work done on a difficult build, these words always come to mind. "The patience of a Saint and the touch of an Angel" and right now, they fit perfectly.
Beautifully done Mr Gilman. 🙂
9 December 2014, 23:24
![](/profiles/img/11283-s.jpg)
Hey Bill that looks good! So good to see that you didn't lost the touch 😉
9 December 2014, 23:39
![](/profiles/img/11956-755-s.jpg)
She´s a real beauty, Bill! Well done!
All these nice little details... and the clean build... great!
10 December 2014, 03:49
![](/profiles/img/11453-615-s.jpg)
Love your touch on the "Single-colour" paintwork, Bill!
Keep the grand-kids away from her!!
10 December 2014, 04:43
![](/profiles/img/10105-s.jpg)
I'm back at work following a week off due to chemo. I spent some time today finishing the landing lights in the leading edge of the port wing. It's amazing what you can do with some photoetch and a Tigercat canopy! New photos uploaded to document the silliness. 🙂 🙂 🙂
20 December 2014, 01:14
![](/profiles/img/15888-619-s.jpg)
the silliness makes an amazingly good landing light lense hey...modelling in the true sense
20 December 2014, 02:18
![](/profiles/img/11956-755-s.jpg)
Amazing as always, Bill! Good job!
And my full respect for keeping on modeling even though you have a hard time with your chemo.
20 December 2014, 05:01
![](/profiles/img/11453-615-s.jpg)
Wow, Bill! What with the kidnapped canopy, the plastic cutlery, and your magic paintwork, your Beaufort looks beautiful! Nothing silly about it at all. Truly inventive! Keep it up, and your other battle too!
20 December 2014, 06:16
![](/profiles/img/14265-431-s.jpg)
I did a similar thing to an Airfix Beaufighter. I used a special clear heat formable plasticva wrapped around the wing at the light position. It fitted quite well. Nice work!
20 December 2014, 08:24
![](/profiles/img/10105-s.jpg)
Thanks, everyone! Marc, tell me more about the clear heat formable plastic. I have the sheets for my vacuform machine, but they were too thick for this job. Something that is clear, thin, and can be formed with a hair dryer would be a great tool.
20 December 2014, 13:17
![](/profiles/img/14265-431-s.jpg)
The stuff is called Vivak and is from Bayer. 0.5mm sheet formable between 120 and 160 degrees Celsius. I heat a small piece over a small flame and wrap it around the position where it going to be placed.
20 December 2014, 17:26
![](/profiles/img/10105-s.jpg)
I'm feeling a bit better after the chemo side effects, and I managed to get quite a lot of work done on the Beaufort. First, all of the gear doors are now on. And, more importantly, I added all sixteen of the ASV antennae that are on the sides of the rear fuselage. I was dreading this, but it was much easier than I thought. Photos have been uploaded to show all the details! Cheers!
22 December 2014, 01:49
![](/profiles/img/11956-755-s.jpg)
Beautiful, Bill! I can not even imagine to handle such small parts. Most likely all 16 would have just jumped out of my tweezers... 🙂
22 December 2014, 02:13
![](/profiles/img/13931-715-s.jpg)
Wow Bill! That would drain the energy out of you. I would be doing that with my shaky hands and they would be pointed in every direction. Glad that you are feeling better and great photos to watch as you progress along. 🙂
22 December 2014, 02:17
![](/profiles/img/10105-s.jpg)
Thanks, mates! 🙂
Murad, no worry - there are more antennae coming!
22 December 2014, 17:15
![](/profiles/img/10105-s.jpg)
Hi mates - just a few new photos today. I've added the bomb racks, the bombs, and a variety of probes that are on the forward fuselage. The plan is to get all of the fiddly stuff added to the undersides and forward fuselage, and then finish her up with the fiddly stuff that is mounted on top. We're almost there! 🙂
29 December 2014, 01:54
![](/profiles/img/11956-755-s.jpg)
Unbelievable that this is a 1:72 airplane. So many details.
Keep going Bill, great work!
29 December 2014, 12:25
![](/profiles/img/10105-s.jpg)
Even more details are being added - there are two high voltage whisker antennae on the forward fuselage. Special Hobby provide tiny, circular grommets in photoetch that are added first. The whiskers come later. I also painted the frames on the top turret, and the Montex masks worked great. Then I realized that I forgot about the machine guns in the leading edge of the wings, so I had to carefully drill two holes where I can put the gun barrels. I think that hypo needles will work great for the barrels, so I need to go downtown into the city to see if I can get some used hypo needles from some addict in the gutter. Lastly, I added the bracket on the starboard fuselage for the drift sight. And there is still more fiddly stuff to come! Photos posted for all the additions. Cheers, Bill
1 January 2015, 16:39
![](/profiles/img/10148-258-s.jpg)
Indeed nearly unbelievable! I am completely stunned and enjoying the pictures!
1 January 2015, 17:01
![](/profiles/img/11283-s.jpg)
Hey Bill, thank you for sharing your works, always very inspiring. I wish you a good 2015 🙂
1 January 2015, 19:48
![](/profiles/img/14298-181-s.png)
Bill, what an amazing thing you have done with what most people would call a mundane subject. The detail and imagination that has gone into your build is just fantastic mate.🙂 I have really enjoyed watching the progress of you efforts. (Thumbs up). You have the "Patience of a saint" 🙂
2 January 2015, 00:51
![](/profiles/img/10792-966-s.jpg)
Breathtaking result Bill. All the very best and healthy 2015 mate.
2 January 2015, 08:46
![](/profiles/img/16661-726-s.jpg)
This is an extraordinary example of what can be achieved in this scale. It is a real joy to look at!
2 January 2015, 09:20
![](/profiles/img/14298-181-s.png)
You have a lot of fans out here Bill, and so you should mate as you really have got a nice touch. 🙂
2 January 2015, 09:23
![](/profiles/img/10105-s.jpg)
Thanks, mates! I spent some time yesterday making the supports for the underwing Yagi antennae. I decided to use the resin support that came with the High Planes Models (HPM) set after all, but was surprised to see that they did not seem to be correct. Plus, I broke one of them earlier.
First, I repaired the break, and then modified them both to more accurately resemble the photos I have. (Plus, they have to match up to the photoetch antennae from Special Hobby, which may not be completely correct either.) Then I painted them. Hopefully, I'll have the supports and the antennae mounted tonight. Then the model will be really difficult to pick up! 🙂
2 January 2015, 16:51
![](/profiles/img/10105-s.jpg)
Since the model doesn't have enough antennae, I added some more! Up front on the sides of the nose are two high-voltage transmitters (part of the ASV radar system) that look like whiskers. Then, on the underside of each wing, the Yagi antennae have been added. They're the ones that look like my old roof-mounted TV antenna. If I'm not mistaken, the term Yagi refers to the design of the antenna, in this case several parallel rods.
I believe this concludes everything that needs to be added on the bottom, so now I can finish the fiddly bits on top. The model should be complete this weekend! 🙂
3 January 2015, 16:38
![](/profiles/img/13517-832-s.jpg)
It's looking good Bill, I look forward to seeing the completed model.
3 January 2015, 17:24
![](/profiles/img/10105-s.jpg)
Thanks, mates! I just realized that I have reposition the Yagi antennae on the supports. I have them too far forward. This should be fun! Maybe...
3 January 2015, 19:05
![](/profiles/img/11453-615-s.jpg)
Hmmm.... guess I can't use my favourite movie phrase.."What we have here....is a failure....to communicate!"
Excellent detail work, Bill. You must have a very steady hand!!
3 January 2015, 22:09
![](/profiles/img/10105-s.jpg)
That's me, Steady Hand Luke! I fixed the Yagi aerials, so now they're in the right place. Working on the turret now...and I can use my favourite movie line: "That rug really tied the room together!" 🙂
3 January 2015, 22:40
![](/profiles/img/14298-181-s.png)
But Wait, there's more !!!!The video of this most wonderful venture will soon be released on.................................!!!, Yestube.! and as an added bonus, a visual tour of his most magnificent display case and all the other perfect replicas he has ever made,!!! WOW, what a treat folks. ! 🙂🙂 🙂
4 January 2015, 01:56
![](/profiles/img/10105-s.jpg)
Hi mates! The unthinkable has happened! No, I didn't drop the model - I finished it. Woo hoo! I uploaded a bunch of new pictures, probably straining Tim's servers in the process. Enjoy! Cheers, Bill
6 January 2015, 04:22
![](/profiles/img/13931-715-s.jpg)
Congratulations Bill! 👍 Don't even joke about dropping it! What a great result. I have really enjoyed watching your in-progress photos and I am sure that you are happy with the results. 🙂
6 January 2015, 05:04
![](/profiles/img/10148-258-s.jpg)
She is an amazing beauty, I adore your skills and your steady hand! Now that´s a milestone in 1:72 scale modeling!
6 January 2015, 07:01
![](/profiles/img/11453-615-s.jpg)
I agree with all the compliments thrown your way, above, Bill. I think some one modelling this bird in 48th or even 32nd would be envious of your result and level of detail. Remind me never to put one of my models beside one of yours! Luckily we're very far apart, so that won't happen...😉 I look forward to your next project...
6 January 2015, 08:43
![](/profiles/img/10923-723-s.jpg)
Hi Bill, youve did again a wonderful job, she looks marveles. Just great.
6 January 2015, 16:28
![](/profiles/img/12740-s.jpg)
Bill, thats awesome!
I'm speechless!
1:72 .... How do you get patient for that kind of work?
6 January 2015, 17:00
![](/profiles/img/10876-504-s.jpg)
Superb build Bill, congratulations in making a dull colour scheme come to life.
6 January 2015, 20:16
![](/profiles/img/10105-s.jpg)
Wow, thanks for all of the wonderful comments! I truly appreciate it. You guys are the best! Cheers, Bill 🙂 🙂 🙂
6 January 2015, 23:43
![](/profiles/img/10803-s.jpg)
Hi Bill! Sorry for this late post, but I have been offline for several days by spending my time putting on new wallpapers in my home.
This model is excellent and you can be proud of it! Show this one to the guys from Special Hobby as well and enter their Hall of Fame! (Website, Catalog) Outstanding work!
7 January 2015, 20:58
![](/profiles/img/14265-431-s.jpg)
Hi Bill, outstanding work. Overall green is definitely not on easy task. Well done. Cheers, Marc
7 January 2015, 21:31
![](/profiles/img/10105-s.jpg)
Thanks, mates! Christian, does Special Hobby have a web gallery where modellers can upload photos of their finished kits? I only know of the MPM/CMK eShop site.
7 January 2015, 22:27
![](/profiles/img/10803-s.jpg)
Hi Bill there is no web gallery, but if you sent some pics they will use them for their photo section of their catalog. I did the same with this one:
cmkkits.com/en/aircr..ner-trainer-version/
cmkkits.com/en/aircr..ow&imageID=90093
8 January 2015, 07:46
![](/profiles/img/10803-s.jpg)
Hi Bill !
Here is another link for posting pics of MPM Products:
mpmkits.eu/
8 January 2015, 11:38
![](/profiles/img/10105-s.jpg)
Thanks Christian - I sent them a few pictures. It will be interesting to what they do.
"Petr, it's lunatic from America sending pictures in again - what should I do? Maybe I should give him email address for other Petr at AZ!"
8 January 2015, 23:52
![](/profiles/img/15737-829-s.jpg)
@Bill Sweet aviation models also have some modeller Hall of Fame 🙂 here are few mine -
sweetaviationmodels.com/14103FM2.html
sweetaviationmodels.com/14107zero.html
9 January 2015, 10:42
![](/profiles/img/user-s.jpg)
Saw it on Britmodeller Bill and it blew me away there...loved seeing all the images here too... great stuff cheers Bruce aka Winenut
7 February 2015, 13:08
![](/profiles/img/10105-s.jpg)
Thanks - and another nickname I can attach a real name too! I sent some photos to the MPM blog and they asked for permission to post them, which I immediately gave. Haven't seen them yet, though.
7 February 2015, 17:17
![](/profiles/img/10876-504-s.jpg)
Congratulations on all the publicity this magnificent build is getting Bill. All the very best.
7 February 2015, 21:29
![](/profiles/img/11283-s.jpg)
Hi Bill
This is the proof that its not the kit... that makes the artist!
Amazing work as usual.
Congratulations Bill 😄
14 February 2015, 16:21
![](/profiles/img/16303-647-s.jpg)
Picked this kit up today. I hope mine will be half as good as yours 🙂
27 February 2015, 08:32
![](/profiles/img/10105-s.jpg)
It's a nice kit, it goes together well. I hope you like photoetch! 🙂
27 February 2015, 17:21
![](/profiles/img/16303-647-s.jpg)
Never used it really till now the same with Resin. I will probably dont build it soon, but its nice to have the kit in the stash - even more after I saw your finished kit 🙂
27 February 2015, 17:25
![](/profiles/img/14298-181-s.png)
Bill, I am most impressed with everything you have done with your build. I am just wondering how many hours you have lavished on her ?
Many times I have been through the pics here and I always see something new/different. 🙂
27 February 2015, 23:17
![](/profiles/img/10105-s.jpg)
Hmmm...I don't keep track of hours, but from start to finish was about five months. However, I was also going through chemotherapy for most of that time, and I was not able to do any modelling while I was recovering from the treatments. Only two more treatments to go! Next week and then the first week in April. Woo hoo! 🙂
28 February 2015, 00:33
![](/profiles/img/13796-867-s.jpg)
Bill, I am sorry to hear about that. Sending good thoughts your way. Again, awesome model.
28 February 2015, 01:14
![](/profiles/img/10148-258-s.jpg)
Simply one of the -if not the- best work on a monochrome surface. Not overdone, not to less- you have awaken that model to live!
28 February 2015, 15:37
![](/profiles/img/10105-s.jpg)
Thanks, Roland! I was concerned about over-doing it, then I thought maybe I had not done enough. It's good to know that you think it's just right! 🙂
Thanks for the nice wishes, John!
28 February 2015, 18:07
![](/profiles/img/62842-375-s.jpg)
You really are more an artist than a modeller... Amazing, i am speechless...
2 November 2020, 13:05
![](/profiles/img/10105-s.jpg)
Thanks Edward! Now Airfix is coming out with a new tool Beaufort Mk.I - it's about time! It will make a nice companion to the Australian version here.
2 November 2020, 20:05
![](/profiles/img/62842-375-s.jpg)
Yer welcome mate! 🙂
Oh yeah, i know and i can't wait to have it :-D
2 November 2020, 22:32
![](/profiles/img/10148-258-s.jpg)
A really beautiful result, inspiring and pure joy! Congratulations on this masterpiece!
3 November 2020, 08:27
![](/profiles/img/10105-s.jpg)
Thanks mates! I tell you, after I finished with all those antennae I vowed to never touch a photoetch fret again in my life! Until the next kit, of course. Cheers, Bill
7 November 2020, 23:10
![](/profiles/img/34728-244-s.jpg)
Worthy efforts ! Bravo ! One question though, how come you use a 1 Euro coin as scale when you live in the States ?
19 December 2020, 09:26
![](/profiles/img/10105-s.jpg)
Thanks guys! Another thread resurrection, I love it. As far as the euro coin goes, I use that because I spent all my Yankee money. 🙂
20 December 2020, 21:54
Album info
I'll be building the Special Hobby 1:72 DAP Beaufort Mk.VIII - this is the version license built in Australia by the DAP (Department of Aircraft Production). The camouflage scheme will be overall Foliage Green with nose art for "Snifter," who was a cartoon dog used for patriotic posters and books during the war. This aircraft was used primarily for anti-submarine patrols off the coast of Australia.