WIP - A-7D Corsair II

1
December 21, 2015
Chosen armament.
2
December 24, 2015
Sanding, puttying, priming all over again.
3
December 24, 2015
Engine exhaust cover is a disaster...
4
December 24, 2015
...as well as exhaust itself.
5
December 24, 2015
Not better with air duct.
6
December 24, 2015
And air intake.
7
January 6, 2016
Finally Aires set arrived. I tried to fit whell wells, so I had to cut some of the plastic, but it looks promising.
8
January 6, 2016
I had to get rid also the imitation of front well from the air intake.
9
January 6, 2016
I cut also some to the parts in the exhaust cover. I will try to do them from the proper size piece of HIPS.
10
January 6, 2016
Air intake was painted before gluing as later I wouldn't be able to paint it properly.
11
January 6, 2016
It will be hard to sand this putty.
12
January 13, 2016
I've upgraded a canon as kit's one was terrible.
13
January 13, 2016
And started shading bombs and missiles
14
January 13, 2016
as well as resin parts.
15
November 28, 2016
Resin wheel and electronic bays glued in place.
16
November 28, 2016
Instrument panel.
17
November 28, 2016
Gun.
18
November 28, 2016
Cockpit.
19
November 28, 2016
Ejection seat.
20
November 28, 2016
Exhaust cover.
21
November 28, 2016
Cockpit glued.
22
November 28, 2016
Intake.
23
November 28, 2016
Top view.
24
November 28, 2016
Issues on the bottom side.
25
November 28, 2016
After some corrections.
26
December 6, 2016
Had to glue canopy.
27
December 6, 2016
Gaps were filled with styrene pieces and putty.
28
December 6, 2016
Sandin in progress.
29
December 6, 2016
Big mouth almost ready.
30
December 13, 2016
Finally all done. Sanded and rescribed.
31
April 1, 2018
Armament
32
April 1, 2018
Ready
33
April 1, 2018
Primer
34
April 1, 2018
Preshading
35
April 1, 2018
First color
36
April 1, 2018
And second one
37
September 28, 2018
All done and ready
38
September 28, 2018
After painting and gloss - top view
39
September 28, 2018
After painting and gloss - bottom view
40
September 28, 2018
With decals
41
September 28, 2018
With decals
42
September 28, 2018
With decals
43
September 28, 2018
Last wash
44
September 28, 2018
And trying on base
45
September 28, 2018
Base prepared with sanding paper
46
September 28, 2018
Adding some dirt
47
September 28, 2018
Adding some dirt
48
September 28, 2018
After flat lacquer
49
September 28, 2018
After flat lacquer
50
October 2, 2018
Glued all parts.
51
October 2, 2018
Top view
52
October 2, 2018
Belly view
53
October 2, 2018
New base instead of aircraft deck
54
October 2, 2018
Close view
55
October 3, 2018
Bottom view with more dirt, streaks etc.
56
October 3, 2018
On the base.
57
October 4, 2018
58
October 4, 2018
59
October 4, 2018
60
October 4, 2018
61
October 4, 2018
62
October 4, 2018
63
October 4, 2018
64
October 4, 2018

Kommentarer

1 21 December 2015, 17:40

Stefan Schacht
I'm in! Cheers Stefan

21 December 2015, 22:21

John Thomas
Nice start

6 January 2016, 13:03

Przemek Przybulewski
Stefan - Welcome aboard.
John - Thanks. While unboxing model I was saying to myself, do it easy, simple, without any modification. Just Out of the Box. Next day I was checking Scalemates for possible upgrades and it llooks like it will be another long build.😉

7 January 2016, 10:00

Przemek Przybulewski
Guido - There are still plenty of free chairs in a first row.😉
Thank and i hope you will enjoy watching.

7 January 2016, 10:10

Kurt Reichert
Looks interesting, i am in too!

13 January 2016, 18:11

Christian Ristits
I will take a Seat too!

13 January 2016, 19:40

Gareth Windsor
Good start. I'm in.

13 January 2016, 19:48

Clifford Keesler
I'm in, looking good.

14 January 2016, 03:50

Przemek Przybulewski
Kurt, Christian, Gareth, Clifford - It is nice nice to have such audience. 😄
Probably project will slow down a little bit as I put my hands on Patriot from Trumpeter so I have to share time between those two models. BUt I promise I will try to update it as often as possible. 😉

14 January 2016, 10:07

Przemek Przybulewski
Work on model resumed few days ago.

28 November 2016, 16:43

Bryn Crandell
Looking on!

28 November 2016, 20:47

Przemek Przybulewski
Welcome aboard Bryn. Model unfortunately is bad. Maybe not as much as A-10 but most of the main parts just do not fit. I have to bend them, use a lot of CA glue with accelerator to glue them in place correctly. Disaster. I hope when finally I do fuselage, it will be easier. I hope.

29 November 2016, 06:26

Bart Goesaert
Nice progress on this beast... cockpit looks the deal... What nation will it belong to? or will you go for a deep down and dirty Hellenic one?

29 November 2016, 10:17

Spanjaard
cockpit looks good, you are doing a really nice job here... i am certainly grabbing a chair too 🙂

29 November 2016, 11:29

Przemek Przybulewski
Thank you Bart. Honestly, I'm not sure. I was looking for some interesting camo - so if you have some photos, please let me know.
Thank you Spanjaard - I'm sure there are some free chairs in the first row. 😉

29 November 2016, 12:05

Bart Goesaert
do you like showbirds or more deep down and dirty?
[img1] (I think this is an E instead of a H due to the IFR-probe, but it gives an idea of the weathering)
[img2]

forums.airshows.co.u...php?f=9&t=63675

[img1]

[img1]

[img1]?g2_GALLERYSID=TMP_SESSION_ID_DI_NOISSES_PMT

[img1]

6 December 2016, 12:30

Scott Dutton
Great, love watching how you paint, should do a book.

1 April 2018, 23:11

Nikolaos Kouzinis
foxtrotalpha.jalopni..flight-af-1651178309

2 April 2018, 15:33

Nikolaos Kouzinis
pesawattempurdaffa.b..06/7-corsair-ii.html

2 April 2018, 15:47

Nikolaos Kouzinis
photorecon.net/peter..rce-a-7h-operations/

2 April 2018, 15:51

Holger Kranich
Dammit, that Looks impressive! I´ll take the seat at Spanjaard. Beer anyone?😉

2 October 2018, 11:42

Scott Dutton
Pure talent, I'm jealous, great work

2 October 2018, 13:11

Spanjaard
Sure Holger 🙂

2 October 2018, 13:22

Clifford Keesler
Excellent work.

2 October 2018, 13:34

Przemek Przybulewski
Thank you - I hoped that it's over but one of the folks on polish model forum posted that I shoud add some dirt at the bottom, especially on fuel tanks and fuselage.
I'm doing this so I will upload picture tomorrow.

2 October 2018, 14:07

Martin Oostrom
That is a splendid A-7. It always amazes me how much ordnance these birds could carry.

2 October 2018, 14:27

Bart Goesaert
splendid work... stunning as always...

2 October 2018, 14:34

Florent Thouret
I hesitate.... Is it too nice so I stop modelling or is it too inspiring so I keep modelling ? 😉

3 October 2018, 17:38

Spanjaard
inspiring then 🙂
fantastic weathering

3 October 2018, 17:40

Przemek Przybulewski
Thank you guys - I'm very happy that you like it 🙂

Time to plan next one - I'm afraid it will be tough choice to make.

3 October 2018, 19:59

Daniel Klink
What a beautiful mess....👍

3 October 2018, 20:03

Spanjaard
with your stash... you have plenty of choices 🙂 but yes, tough one 🙂

3 October 2018, 20:28

Scott Dutton
Great job, especially now filthy. We could choose your next build for you 🙂

4 October 2018, 03:00

Michael Hickey
What a stunning build of the SLUF, well done.👍👍👍

4 October 2018, 04:37

Przemek Przybulewski
Thank you Daniel and Micheal.
Spanjaard - yes, too much planes to choose 😉
Scott - we can make a survey however looking at the stash I thought about F-117A. Not too much parts but quite challenging painting.

4 October 2018, 06:18

Bart Goesaert
nice choise, then the Mig-21?

4 October 2018, 06:25