Mosquito build

1
March 27, 2017
Cockpit in the early stages of the build. It's a bit if a shame that most of that beautiful detail will be near invisible.
2
February 24, 2017
Damn, that's BIG, about 66 cm wingspan
3
February 24, 2017
Very nice detail on the engines too, and the fit is perfect.
4
February 24, 2017
Added seatbelts from the metalfoil lid from my cat's food! I know they're not quite correct, but good enough for me.
5
February 24, 2017
Added some extra detail to the walls, mostly wire
6
February 24, 2017
One side of the fuselage was pretty warped, but I got it together eventually!
7
March 3, 2017
the wings wouldn't go on like they should, and i couldn't figure out why. So a little adjustment and a little filler was required.
8
March 3, 2017
It starts to look like a plane, a BIG plane!
9
March 11, 2017
Heavy weathering on the engines, and I did them both different. I'm planning a diorama with one engine in and one probably hanging from a crane on a truck.
10
March 11, 2017
11
March 11, 2017
Some mild rusty spots on both engines. The diorama will have some mechanics restauring the plane, sometime in the 2000's.
12
March 11, 2017
Part of the fun, painting! Except from the black (tamiya) all enamels from humbrol and revell
13
March 11, 2017
14
March 11, 2017
All painting except from the cockpit green and black for the engine was done with a brush. Sofar, that is.
15
March 11, 2017
Next up will be the landing gear, got some nice white metal after market parts for that!
16
March 16, 2017
White metal landing gear
17
March 16, 2017
Still some cleaning and polishing to do
18
March 16, 2017
My first time trying white metal after market parts
19
March 19, 2017
This landing gear has taken the term "fiddly" to a whole new level
20
March 19, 2017
After several attempts to glue the white metal cross struts (?) in place without bending them I decided to use the plastic kit parts.I also glued the tanks on upside down.
21
March 19, 2017
Corrected the tanks and some other mistakes
22
March 20, 2017
The engine and landing gear assemblies are kits in itself. Some fit problems of the engine assembly, and turned out I got the wrong one! The engines differ in 1 part, but you can't swap them around!!
23
March 20, 2017
The mudguard assembly. Fitting that in place is another challenge, as the ceiling of the wheel bay, where it should be glued to, can't be installed until all the other parts are in place....this calls for some thinking ahead!
24
March 20, 2017
This nacelle won't have the engine installed. The diorama will show some mechanics that have just removed the engine with a crane on a mercedes truck. Pictures later.
25
March 27, 2017
One engine in
26
March 27, 2017
One engine out
27
March 30, 2017
The instructions from Airfix show 2 arrows to drop the nacelles in place under the wings. In real life it took 30 minutes of wrestling, sanding, cutting and swearing and lots of pressure and glue to fit them.
28
March 30, 2017
The fit of the nacelles is terrible. There is no way on god's green earth these things will fit without lots of trimming.
29
April 26, 2017
My first camo in probably 30 years. Will need a touch up session, but overall quite reasonable. Looks even bigger with some colors on!

Kommentarer

1 13 February 2017, 11:18

Robert
Hello Daan,

I'm not sure how much of this model you want to scratch build.... but we are currently building 3 of those kits in parallel and we are half way through the process.
The most issues we had so far, we encountered with the main landing gear and engine frames. The plastic of the kits is so bridle that it is either already broken in the sprue or it breaks while cutting it out.
The landing gear is designed to be moveable, which is pointless and complicates the construction a lot.
I wish you a lot of fun with your build.

Cheers Robert

13 February 2017, 12:10

Daan Baars
Hi Robert
Thnx for your message. Just started this kit and already noticed the brittle plastic. I'll keep that in mind when I get to the landing gear and engines. I'll probably leave one engine out, i'm sort of planning a diorama where this plane is being restored and one engine hanging in a crane build on a truck. But that can change....
Cheers
Daan

13 February 2017, 12:30