De Havilland DH.82A Tiger Moth

1
August 30, 2020
2
August 30, 2020
3
August 30, 2020
4
August 30, 2020
5
August 30, 2020
6
August 31, 2020
Decals are printed clean and in excellent quality. In combination with Mr Setter 232 the result is very satisfying. Here and there I had to fix minor imperfections wit a mix of H19 and H174.
7
August 31, 2020
8
August 31, 2020
9
September 7, 2020
Painted and decals in place. Walkway = self made decal. Unthinned dark grey paint airbrushed with low pressure. After 15 minutes 1800-Micro Mesh polishing cloth pressed into the paint.
10
September 7, 2020
11
September 7, 2020
12
September 7, 2020
13
September 10, 2020
Unfortunately both clear parts from the kit looks like armored glas🙁 Fortunately I wait any days and today I had a idea and time to fix this problem. 0,3 mm thick PVC looks much better🙂
14
September 10, 2020
15
September 12, 2020
16
September 12, 2020
17
September 12, 2020
Self adhesive aluminum foil cuttet in small strips and applied singly to the windshield. Rivets via Rosie the riveter.
18
September 12, 2020
Foil stripes zoomed ...
19
September 13, 2020
20
September 13, 2020
21
September 13, 2020
22
September 14, 2020
23
September 14, 2020
Control wire for ailerons.
24
September 16, 2020
25
September 16, 2020
26
September 16, 2020
27
September 17, 2020
Lengthened wire horn on the rudder = on course again.
28
September 19, 2020
29
September 19, 2020
30
September 20, 2020
31
September 20, 2020
32
September 20, 2020
33
September 20, 2020
34
September 20, 2020
35
September 20, 2020
36
September 20, 2020
37
September 20, 2020
38
September 20, 2020
39
September 20, 2020
40
September 20, 2020
41
September 20, 2020
42
September 20, 2020
43
September 20, 2020
44
September 20, 2020
45
September 20, 2020

Kommentarer

34 30 August 2020, 10:58

LucLuke B
I'll be watching this one. Quite a few modifications/corrections already.

30 August 2020, 18:39

René "Lord Bilbo" Bartholemy
Yep, me too. Nice beginning!

31 August 2020, 15:57

Spanjaard
looking really good 🙂

31 August 2020, 16:15

bughunter
The paints on the heli is not yet hardened and we see colored parts on the next project. Full steam as always 👍
Do you not separate the control surfaces?

31 August 2020, 19:16

Bernhard Schrock
Indeed full steam thanks "red Superzündi"🙂. Control surfaces: I discovered an excellent walkaround and I'm stunned to see that the fins and elevators were covered with ONE / common !! piece of fabric. The same situation on the wings and ruder. Because of that I decided to leave the control surfaces on the rest. largescaleplanes.com/walkaround/wk.php?wid=157

31 August 2020, 19:38

Slavo Hazucha
Definitely not a Tomcat😉 But a lovely hi-viz pattern - will check IN & follow!

I see the upgrades & engineering solutions have already started gathering around the build! 👍

1 September 2020, 10:01

Bernd Korte
Nice project and it looks like it's progressing very fast!

1 September 2020, 10:20

bughunter
Nice work! Do you plan to use all the new Eduard PE sets? Brassin wheels are also released. The Airfix rigging PE set seems to be also very realistic due to the flat bars.

6 September 2020, 13:40

Bernhard Schrock
Moin bughunter, Danke für die Tipps. Hab's beim Research gesehen, dass es ein Riging Set von SBS Models gibt. Meinst du dieses oder gibt es von Airfix ein anderes? Da das Ding von SBS nicht zu kriegen ist, wollte ich mein eigens kreiertes Uni Set verwenden. So wie bei Boeing Stearman...
Räder ausm Bausatz finde ich nicht schlecht bzw. wollte sie verwenden wohl auch aus Faulheit da ich keine Bestellung aufsetzen will mit Versandkosten gleich Warenwert🙂. Heute eben rot geairbrusht. Aus H19 und H174 genau den Ton der Decals getroffen.

6 September 2020, 16:18

bughunter
Ja, das SBS set meinte ich. HLJ hat es😉 Aber wenn Dein Set auch passt, ist es ja gut.

6 September 2020, 16:26

Bernhard Schrock
Danke. HLJ... weit weg, Versand kostet Vermögen und es wäre ein Reimport...🙂.

6 September 2020, 16:30

René "Lord Bilbo" Bartholemy
Verdammt... Erst mußte ich "SBS" suchen, dann noch mal HLJ um euch überhaupt zu verstehen! Könnt ihr zwei auch Deutsch?😉
Jetzt ohne Witz, danke daß ihr mich auf SBS gebracht habt. Die Marke kannte ich noch nicht, aber die haben einige interessante Sachen auf Lager. 👍

6 September 2020, 20:52

bughunter
Hier bei Scalemates ist alles nicht weit weg ...
1. Click auf die Airfix-Schachtel unterm Projekt, zum Zubehör scrollen - da erscheint das SBS model set
2. Click auf das SBS set Bild - auf der neuen Seite zu den Shops scrollen
3. Click und Du bist bei HLJ
Zu nicht Corona-Zeiten habe ich da für das Small Paket meist 6 bis 7€ bezahlt, das ist ok.

7 September 2020, 17:31

René "Lord Bilbo" Bartholemy
Stimmt! Meine Lösung war nicht so einfach... 🙂

7 September 2020, 18:02

Daniel Klink
Ich werde mich hier mal niederlassen und versuchen zu lernen und was mitzunehmen für den Wold Cruiser, was Verspannung und Ösen etc angeht.

7 September 2020, 18:32

Bernhard Schrock
Hi Daniel. Willkommen. Allerdings beachte bitte, dass die Tiger Moth zu der Generation der Doppeldecker aus den 30gern gehört, die nicht Seile sondern flache Stahlprofile als Verspannung hatten. Vielleicht hilft es dir wenn du bei meinem Artikel/Galerie über den DWC reinschaust.
Douglas DWC #Orleans | Project by Yellowwing (1:72)

7 September 2020, 18:37

Marcel Klemmer
Moin zur Info, auf der Homepage von SBS ist das Set in 1/48 verfügbar für die DH-82 und ich habe es bestellt.
Gruß
Marcel

7 September 2020, 19:02

Daniel Klink
Ah jetzt ja.
Hui da liegt die Latte aber mega hoch.... Du hast ja auch bei der Douglas an jede Öse gedacht 👍

7 September 2020, 19:11

Lochsa River
personally...i make it a point NEVER to build something Bernhard has done....it would only depress me...how can anyone be that good?

The Douglas plane is in the stash but that's it....

8 September 2020, 02:02

Ben M
watching, I love tiger moths. moin moin.

10 September 2020, 18:44

Hanno Kleinecke
What a beautiful red ! Your windscreens are a vast improvement compared to the kitparts 👍

11 September 2020, 07:21

Lochsa River
I am trying to figure out exactly how you did the windshield.

Clear acetate was cut and hinged and then an imprinted frame put on it?

12 September 2020, 17:46

Bernhard Schrock
Lochsa_River: Pvc about 0,3 mm thick. Self adhesive aluminum foil strips. See last pictures.

12 September 2020, 18:32

bughunter
Great idea with the frame on the windshield 👍 I always like your selection of colors. This biplane is no exception!

12 September 2020, 18:34

Thomas Espe
Watching this for sure.

14 September 2020, 18:02

Tom Beighley
Super nice build!

15 September 2020, 03:53

Erik Leijdens
Fantastic work on this Tiger Moth Bernard. Much save your build as a benchmark

15 September 2020, 07:23

Slavo Hazucha
Excellent job on the windshields... 👍 And all the rest too - amazing how you manage to add so much scratch material and keep the whole thing so clean...

15 September 2020, 16:00

Andy Ball
Eye-watering-ly and masterly!

15 September 2020, 16:02

Bernhard Schrock
Your comments are very appreciate! Slavo: it's no magic but Instagram filter 27A (for biplanes-WIP pictures)🙂

15 September 2020, 16:44

bughunter
Hammermodell! 👍

15 September 2020, 17:48

bughunter
What, already done?
Again a very impressive model of your workbench 👍

20 September 2020, 18:06

Daniel Klink
Einfach nur wunderschön anzusehen 👍

20 September 2020, 18:07

Hanno Kleinecke
No mothballs needed for this moth, on the contrary ! What a beautiful insect this is. Is the pe for rigging your homemade stuff or kitparts ?
Steering rods look very authentic !

20 September 2020, 18:57

Bernhard Schrock
Thank you bughunter, Daniel and Hanno. I'm glad that you like my Tiger Moth. The PE - parts are from self created rigging sheet (Neusilber). I used 0,3 mm wide strips.

20 September 2020, 19:12

Lochsa River
Outstanding....a real joy to look at and the details are wonderful.

20 September 2020, 19:26

Spanjaard
simply excellent.wow.

20 September 2020, 21:09

Slavo Hazucha
Beautiful job and a super-inspiring display how far one can go with the Airfix kit... Really captures the "simple & calm beauty of flight" message the Tiger Moth communicates every time I see a picture or video of it.

May not have the complexity of exposed helo rotors & interiors, but you cut it so precise it calls out of the photos just like the real plane. Top notch & beautiful subject! 👍

20 September 2020, 21:13

Alex K
Awesome...

20 September 2020, 23:21

René "Lord Bilbo" Bartholemy
Next to all that has been said, there's another thing that I absolutely adore: no weathering. The plane looks brand new and that's somehow making it even more impressive.
Add any number of superlatives here... 🙂

21 September 2020, 05:46

bughunter
You were too fast with the build - in the newsletter of Special Hobby was now a lot of nice accessories😉

22 September 2020, 16:33