Album (82)
Alle album
17 bilder
RMS Mauretania build1:600
Having added a lot of aluminum foil, and drilled open all the scuttles, it was time to look into further assembly. I did...
Prosjekt: RMS Mauretania
12 bilder
Making a sea base for the Airfix Severn Lifeboat1:72
I started by making a sea base with the top of a wave diagonally to its center. I used my trusty foam cutter to good ava...
Prosjekt: Severn Lifeboat at speed
5 bilder
Westland Ses King HAS.1 HMS Ark Royal IV completed1:72
The model is complete. The portside antenna is hard to see as it was made from Caenis monofilament, but it´s there. I om...
Prosjekt: Sea King HAS.1 HMS Ark Royal IV
8 bilder
Ark Royal IV airgroup, 1970s1:72
This is the currently final setup.
Prosjekt: Sea King HAS.1 HMS Ark Royal IV
16 bilder
Building the Fairey Gannet COD.41:72
The cockpits are quite heavy on PE.
Prosjekt: Fairey Gannet COD.4
6 bilder
Fairey Gannet COD.4 completed1:72
I added yet more weight to the front gear well, and now the model just about sits on its tricycle gear, but really just ...
Prosjekt: Fairey Gannet COD.4
14 bilder
Building the Revell Wind Class icebreaker part 11:300
I started with the kit and the GMM PE set. Moreover, I used various generic PE by Saemann, mainly railings, handwheels, ...
Prosjekt: WAGB Burton Island
11 bilder
Building the Revell wind class icebreaker part 3 - making the base1:300
There is a nice photo on Wikipedia showing Burton islanddriven up the edge of the ice, moored to a pole driven into the ...
Prosjekt: WAGB Burton Island
10 bilder
Building the Revell Wind Class icebreaker - the completed model1:300
I closed the remaining gaps between the model and its base using heavy clear gloss acrylic medium. I then added the figu...
Prosjekt: WAGB Burton Island
11 bilder
Building Westland Sea King HAS.1 from the Revell Mk. 41 kit1:72
Final assembly.
Prosjekt: Sea King HAS.1 HMS Ark Royal IV
15 bilder
Building Wessex XS 880 from the Italeri kit1:72
Finally. After decaling, I sealed the decals with Future, added a flat coat and then the numerous fiddly bits. The anten...
Prosjekt: Westland Wessex HAS.1 HMS Ark Royal IV
19 bilder
Building the Revell wind class icebreaker part 21:300
Painting as usual involved a lot of masking, luckily Stynylrez primer worked great on the plastic, no liftoffs!
Prosjekt: WAGB Burton Island
28 bilder
Making Waves 31:350-700
I first make the wave pattern with a gas burner, very carefully and under proper ventilation (!!!) . Nowadays, I make th...
Prosjekt: Making Waves
Scratchbuilt
24 bilder
Building the Kinetic Sea Harrier FRS.11:48
Eduard´s prepainted PE makes a big difference and eases work in the cockpit a lot
7 bilder
Sea Harrier FRS.1 completed1:48
I tried to find middle ground between making the model too uniform and clean and going overbaord with accentuation and w...
9 bilder
Royal Navy tow tractor1:48
Building this tractor was virtually pure fun. The kti fit quite nicely, and progress was seen quite soon.
17 bilder
Sea Harrier base1:48
After a failed first attempt, I made a template according to the measurements from the InfiniModel instructions for the ...
11 bilder
Smit Harbour Tug completed1:200
The dio shows a rather weary-looking tugboat in drydock about to be refurbished. The workers aren´t actually doing anyth...
Prosjekt: Smit Harbour Tug
18 bilder
Building the Revell Smit Frankrijk Harbour Tug1:200
I used my foam cutter to advantage in this project, I wouldn´t have been able to make these clean angled cuts in foam bo...
Prosjekt: Smit Harbour Tug
8 bilder
HMS Cleopatra completed1:350
The vessel is shown in a moderate sea state, but without a really dramatic effect. To me, it´s more pleasing and effecti...
Prosjekt: HMS Cleopatra
16 bilder
Building HMS Cleopatra1:350
I added watertight doors from an Atlantic Models PE sheet as they looked crisper than the casting. The bridge windows we...
Prosjekt: HMS Cleopatra
13 bilder
Building the Artitec 1:350 van Speijk Class Frigate kit1:350
Main components assembled, typical resin instant gratification.
Prosjekt: HNLMS Evertsen
12 bilder
Building the Hasegawa SH-3H1:48
This image shows the neat Alclad-painted exhausts, but also how I needed to saw them apart to attach them after assmebli...
Prosjekt: SH-3H Sea King
12 bilder
HMS Hermes completed1:700
After mounting the aircraft and vehicles, I added a number of Lion Roar PE figures and my usual friendly flat coat of ob...
Prosjekt: HMS Hermes, the South Atlantic, 1982
6 bilder
HMS Hermes airgroup1:700
Back when I got the kit, many moons ago, I had bought a pack of additional Harriers and Sea Kings from Orange Hobby each.
Prosjekt: HMS Hermes, the South Atlantic, 1982
17 bilder
Building the Orange Hobby HMS Hermes (Falklands fit)1:700
Some dusty work was needed to remove the pour stubs
Prosjekt: HMS Hermes, the South Atlantic, 1982
37 bilder
Building the Airfix 1:600 HMS Suffolk1:600
But the result looked quite neat to me.
Prosjekt: HMS Suffolk 1942
20 bilder
Completing the Airfix 1:600 HMS Suffolk1:600
This is the completed model. I now only would have to pop it into its base cutout, close any remaining gaps and be done.
Prosjekt: HMS Suffolk 1942
17 bilder
Building the Airfix Air Sea Rescue Launch1:72
The kit´s fit was quite OK, with minimal filler needed at the wheelhouse corners and at the rear of the superstructure.
Prosjekt: Airfix Air Sea Rescue Launch
8 bilder
Ford Model T Firetruck progress1:24
My parts spent three weeks in a brakefluid bath to de-chrome them.
Prosjekt: Ford Model T 1914 Fire Truck
12 bilder
Building the Amodel 1:144 C-123 J Provider1:144
I needed quite some time to approach a fit of the main parts. Coffee helped.
Prosjekt: C-123 J Provider
18 bilder
Building the WEM Castle Class Corvette1:350
Mostly a good fit - onyl some minor corrections were necessary.
Prosjekt: HMS Portchester Castle K 362
8 bilder
Sword Fairey Gannet AEW.3 completed1:72
This is quite a unique aircraft, and it did what it was built for.
Prosjekt: Fairey Gannet AEW.3, HMS Ark Royal IV
19 bilder
Building the sword 1:72 Fairey Gannet AEW.31:72
The instrument panel is classically layered from PE, a film and the styrene backing
Prosjekt: Fairey Gannet AEW.3, HMS Ark Royal IV
11 bilder
Building the new Airfix Buccaneer1:72
I started with adding the PE wherever I could prior to any other assembly.
Prosjekt: Royal Navy Buccaneer S.2
17 bilder
Making waves 21:350-700
This is how I work with a flat base, as in a display box. The model will be mounted to it by screws, for which I drill h...
Prosjekt: Making Waves
Scratchbuilt
4 bilder
Making Waves 11:350-700
I started using clear silicone caulking over a painted base. That looked nice at the start, but not in the long run. The...
Prosjekt: Making Waves
Scratchbuilt
20 bilder
Westland Wyvern S.4 build1:48
The completed model. I followed the 4+ booklet on the type re paint, markings, weapons loadout and sensor fit.
Prosjekt: Westland Wyvern S.4
24 bilder
Building the Airfix 1:72 RN Phantom FG.11:72
The beginning - the kit box with artwork straight from "Sailor" and the Big Ed.
Prosjekt: Royal Navy Phantom FG.1
20 bilder
Airfix 1:440 Great Western paddle steamer1:440
The vintage box from 1976 - teenage memories!
Prosjekt: Great Western
16 bilder
Atlantic Models HMS Arrow 19821:350
After assembling the hull, a cutout was made into the base
Prosjekt: HMS Arrow
20 bilder
Building the Atlantic Models HMS Glamorgan after Exocet damage1:350
Beginning the base. After making a cutout for the hull, I produced a general wake pattern with a gas torch.
19 bilder
Building a seriously generic T21:400
There´s a lot of material to be removed
Prosjekt: USS Robin
4 bilder
USS Robin - completed1:400
The model on its base after adding some water and wave effects
Prosjekt: USS Robin
28 bilder
USS Robin - continuing the build1:400
More subassemblies , amongst them some of the various additional sponsons
Prosjekt: USS Robin
12 bilder
USS Robin - commencing the build1:400
The island and funnel have the wrong shape, this is the last specimen of WEM´s resin correction set
Prosjekt: USS Robin
10 bilder
USS Robin - the bases1:400
A full insulation plate with the hull cutouts and preparation of the waves with a gas burner
Prosjekt: USS Robin
Andre album
177 bilder
My older modelsBuilt after toying with some inexpensive and un-photographed kits - the excellent Tamiya Birdcage Corsair. Built around ...