A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | Nr. RS32-0001 | 1:32

Fakty

Marka/Wydawnictwo:: ResKit
Tytuł:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Numer:: RS32-0001
Skala:: 1:32
Rodzaj:: Zestaw waloryzacji
Wydane:: 2020 Nowe formy
kod kreskowy:: 4589913295353 (EAN)
Temat:: Grumman A-6 Intruder » Odrzutowce (Samoloty)

Zaprojektowany do

Ten zestaw akcesoriów przeznaczony jest do:

Trumpeter

2013

2014

Nowe formy

Nowe części

Giełda

Sklepy internetowe

USD 15.61Brak na stanie »

¥ 1836

USD 14.14Brak na stanie »

zł 61.95

USD 16.37Brak na stanie »

Alternatywne jednostki SKU dla ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Uwaga: Ceny i dostępność są tylko wskazówkami. Sprawdź dokładnie, czy produkt rzeczywiście pasuje!

Recenzja zawartości

Recenzje zewnętrzne

Nie wiemy nic o recenzjach na ten temat A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) z ResKit.

Komentarzy

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38

Materiał referencyjny

A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...

Colors & Markings Series Nr. 7

Rock Roszak, Mike Heideman

2023

A-6 Intruder and Prowler Part 7

Military Series Nr. 1111

2022 Cyfrowy

Wszystkie książki » (26 razem) Wszystkie walkaroundy » (15 razem)