Wiadomości
J K
dodał nowy album.
dodał nowy album.
16 3 October 2023, 17:04
J K
Hi Elbert thanks for your comments. Yes the shield is hand painted as there are no decals with the kit. The outline of the pattern is on the shield.I scratched the pattern deeper to help with painting the pattern.
Hi Elbert thanks for your comments. Yes the shield is hand painted as there are no decals with the kit. The outline of the pattern is on the shield.I scratched the pattern deeper to help with painting the pattern.
18 October, 21:13
Qwertzel
dodał nowy album.
dodał nowy album.
13 zdjęć/zdjęcia
Revell Rosenbauer GFLF Simba 8x8Nowy: 18 October, 11:31 1:24
Before and after
Projekt: Revell Rosenbauer GFLF Simba 8x8
7 7 October, 13:54
Martin Oostrom
I have been drooling over this kit since it was new, so definitely following
I have been drooling over this kit since it was new, so definitely following
7 October, 14:21
Bozzer
Yeah, I agree with Martin. This has always been a kit, I wanted to get my hands on. I actually saw the built model, at Bolton IPMS in January. Those tyres are amazing and the vehicle itself, looked almost space-like.
Yeah, I agree with Martin. This has always been a kit, I wanted to get my hands on. I actually saw the built model, at Bolton IPMS in January. Those tyres are amazing and the vehicle itself, looked almost space-like.
13 October, 06:42
Qwertzel
Thank you, Bozzer! Right now, I'm working on the equipment boxes in the back. I didn't start with the cabin. I will post some pictures later
Thank you, Bozzer! Right now, I'm working on the equipment boxes in the back. I didn't start with the cabin. I will post some pictures later
19 October, 07:16
Trez
dodał nowy album.
dodał nowy album.
1 18 October, 22:47
Trez
Not a bad kit for age. Mods; Wheel well cut out, detail added / nose wheel well and doors detailed / single canopy cut to three parts - grab handle head rest detail on inner frame / whip antenna added / antenna wire / cockpit detailed - bullet proof glass - AM belts - map case - boxes - sight post and sight - twisted out of view for taxiing - wires - throttle quadrant / wing flaps deflected
Not a bad kit for age. Mods; Wheel well cut out, detail added / nose wheel well and doors detailed / single canopy cut to three parts - grab handle head rest detail on inner frame / whip antenna added / antenna wire / cockpit detailed - bullet proof glass - AM belts - map case - boxes - sight post and sight - twisted out of view for taxiing - wires - throttle quadrant / wing flaps deflected
18 October, 23:11
Jeroen
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Royal Navy
4"/45 BL MKIX x1 (Flowers Class, Rounded Shield) Micro Master 1:144
MM0049P Więcej niż jeden temat (2)19 October, 07:15
Jeroen
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Royal Navy
14ft Drifter Dinghy x2 (Flower-class) Micro Master 1:144
MM0318P Więcej niż jeden temat (2)19 October, 07:14
Jeroen
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Royal Navy
Byers Stockless 22cwt Anchors (Castle, Flowers & Hunt Class) x2 Micro Master 1:144
MM1195P Więcej niż jeden temat (4)19 October, 07:14
Jeroen
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Flower Class Corvette - Detail Set
L'Arsenal 1:144
KC14401 19 October, 07:13
Rob Tittle
posiada ten przedmiot
posiada ten przedmiot
Airborne Elite (1) Russia's Air Assault Force
Concord Color Series Nr. 3007
Yves Debay, James Hill
1994 19 October, 07:10
Mike Volkov
dodał nowy album.
dodał nowy album.
20 zdjęć/zdjęcia
10 day challenge: 1:72 KP Shenyang F-6CNowy: 19 October, 07:04 1:72
Projekt: 1:72 KP Shenyang F-6C 'Farmer-C'
32 11 October, 07:03
Clement
Interesting pick for a 10 day challenge. But I guess it wouldn't be a challenge without a challenging kit. Best of luck.
Interesting pick for a 10 day challenge. But I guess it wouldn't be a challenge without a challenging kit. Best of luck.
11 October, 07:23
Mike Volkov
Day 2/10 on 10-day challenge: cockpit and gear bays painted and glued the fuselage together. Ready for filling and sanding...
Day 2/10 on 10-day challenge: cockpit and gear bays painted and glued the fuselage together. Ready for filling and sanding...
12 October, 07:03
Mike Volkov
I hope so too. 😄
Day 4/10: KP has given me a lot of fantastic sanding opportunities, but I'm finally getting to the priming. But it still needs a lot of fixing before I can start painting it.
I hope so too. 😄
Day 4/10: KP has given me a lot of fantastic sanding opportunities, but I'm finally getting to the priming. But it still needs a lot of fixing before I can start painting it.
15 October, 05:24
Clement
"Sanding opportunities" is a nice way of putting it 😄
So far so good, looks like you have a good chance of pulling this off.
"Sanding opportunities" is a nice way of putting it 😄
So far so good, looks like you have a good chance of pulling this off.
15 October, 05:57
Mike Volkov
Day 5/10: Repairs after priming and some panel rescribing. Wheels and landing gear finished.
Day 5/10: Repairs after priming and some panel rescribing. Wheels and landing gear finished.
16 October, 08:44
Mike Volkov
Day 6/10: Starting the paintjob with colour correction. The colour of the gear bay is grey and not bluish grey, and the wheel rim is typical Russian green and not grey. So I had to repaint a few things today. I use Ammo masking putty to temporarily hold small parts like this.
Day 6/10: Starting the paintjob with colour correction. The colour of the gear bay is grey and not bluish grey, and the wheel rim is typical Russian green and not grey. So I had to repaint a few things today. I use Ammo masking putty to temporarily hold small parts like this.
17 October, 06:35
Mike Volkov
Thank you, Cuajete! 😊
Day 7/10: One of the top camouflage colours is Mr. Hobby H307. The other colour suggested by KP is H305, which is too grey. So I mixed in several blues, green, red and white. I can't post the proportions, but it's pretty close to the Pakistani bluish grey.
Thank you, Cuajete! 😊
Day 7/10: One of the top camouflage colours is Mr. Hobby H307. The other colour suggested by KP is H305, which is too grey. So I mixed in several blues, green, red and white. I can't post the proportions, but it's pretty close to the Pakistani bluish grey.
18 October, 06:49
Mike Volkov
Day 8/10: The project is drawing to a close. After oil painting I prepare it for decals.
Day 8/10: The project is drawing to a close. After oil painting I prepare it for decals.
19 October, 07:07
Michael Kohl
dodał nowy album.
dodał nowy album.
60 zdjęć/zdjęcia
Japanese Phantom F-4EJ KaiNowy: 19 October, 07:05 1:72
After I mounted the exhausts I considered them too shiny. So, a satin varnish coat followed. Now I like it better
Projekt: Japanese Phantom F-4EJ Kai
42 10 October, 15:41
Michael Kohl
Hi Ben. The engravings of this kit are so delicate that they loose depth with the application of primer to such an extent that panellining becomes quite tricky. I would continue to prime models where this doesn't seem to be an issue but modern airliners or small scale models with such fine engravings I will try to do without. I suppose propper surface preparation and use of colors with more 'bite' than acrylics would be a good idea to avoid issues with paint adhesion.
Hi Ben. The engravings of this kit are so delicate that they loose depth with the application of primer to such an extent that panellining becomes quite tricky. I would continue to prime models where this doesn't seem to be an issue but modern airliners or small scale models with such fine engravings I will try to do without. I suppose propper surface preparation and use of colors with more 'bite' than acrylics would be a good idea to avoid issues with paint adhesion.
12 October, 07:34
Petar Žorić
Not priming a model with fine shallow lines is a great idea. I would guess if you use stronger lacquer based paints its not an issue. Will try this on my next model with fine lines! Awesome progress BTW looks really good!
Not priming a model with fine shallow lines is a great idea. I would guess if you use stronger lacquer based paints its not an issue. Will try this on my next model with fine lines! Awesome progress BTW looks really good!
12 October, 11:56
Ben M
Tamiya makes "fine surface primer" I think for this application. I find it does not level as well as the regular product though.
Tamiya makes "fine surface primer" I think for this application. I find it does not level as well as the regular product though.
12 October, 12:55
Michael Kohl
Almost done. Now I have to adjust the shine. Even with the use of flat clear from Mr. Hobby the paint appears too shiny. Afraid to use AK Ultra Matt as this will be as matt as matt can be and thus maybe a bit too much. Then painting the radon and mounting the exhausts.
Almost done. Now I have to adjust the shine. Even with the use of flat clear from Mr. Hobby the paint appears too shiny. Afraid to use AK Ultra Matt as this will be as matt as matt can be and thus maybe a bit too much. Then painting the radon and mounting the exhausts.
13 October, 11:14
Michael Kohl
I was cheerfully positive to finish this bird today. But the gods of modelling had other plans. After removing the canopy masks I discovered an area where paint/varnish has crept under the edge and marred the inside. Shit. But I will live with it. Then I recalled that the seals of the canopy were still to be done. A quick freehand job seemed to be a sure road to regret and disappointment. So I was in for another round of masking. Painting will follow tomorrow- hopefully.
I was cheerfully positive to finish this bird today. But the gods of modelling had other plans. After removing the canopy masks I discovered an area where paint/varnish has crept under the edge and marred the inside. Shit. But I will live with it. Then I recalled that the seals of the canopy were still to be done. A quick freehand job seemed to be a sure road to regret and disappointment. So I was in for another round of masking. Painting will follow tomorrow- hopefully.
17 October, 19:45
bughunter
Built in a week? Holy moly, great workl 👍
@Ben The finest Primer I know are the MRP ones. It is thinner than many paints! On plastic I still prefer Alclad with micro filler, but the MRP sticks better on resin.
Built in a week? Holy moly, great workl 👍
@Ben The finest Primer I know are the MRP ones. It is thinner than many paints! On plastic I still prefer Alclad with micro filler, but the MRP sticks better on resin.
18 October, 15:29
Ben M
Thanks! I'll see next time I'm at the hobby shop if they have MRP stuff. I have always found tamiya primer to stick to anything but I don't like how the fine surface primer can pool and not level.
This phantom one thing I'm really enjoying are the striped metallic portions showing the ribs. It's very well done. And I see lots of great surface detail despite the Mr surfacer.
Thanks! I'll see next time I'm at the hobby shop if they have MRP stuff. I have always found tamiya primer to stick to anything but I don't like how the fine surface primer can pool and not level.
This phantom one thing I'm really enjoying are the striped metallic portions showing the ribs. It's very well done. And I see lots of great surface detail despite the Mr surfacer.
18 October, 20:01
ElGuapo
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
WW.II Japanese Navy Pilot and Woman Seeing Off
Tori Factory 1:72
MF-36C 2022 Nowe formy Więcej niż jeden temat (2)19 October, 07:05
daynary
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Water Line Series No. 553
Japanese Gunboat HashidateAoshima 1:700
003657 (00365) 2024 Nowe pudełko (wznowienie) 19 October, 06:59
Martin Frick
posiada ten przedmiot
posiada ten przedmiot
Japanese Navy Maintenance Staff (Summer Clothing) Figure 1
Beaver Corporation 1:72
BELF7209 2023 Nowe formy 19 October, 06:58
Martin Frick
posiada ten przedmiot
posiada ten przedmiot
1/350 Ship (Fujimi) Series
IJN Aircraft Carrier Kaga PremiumFujimi 1:350
60041 (600413) 2017 Nowe części 19 October, 06:55
Simon Storey
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
15cm s.IG.33 (Sf) auf Pz.Kpfw.I Ausf.B (new production run) w/ DS Tracks
Dragon 1:35
6259 2015 Nowe części 19 October, 06:54
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo