Wiadomości
Razor Ray
posiada ten przedmiot
posiada ten przedmiot
Coca-Cola
1972 Chevy Fleetside w/Coca-Cola Vending Machine & Crates AMT 1:25
AMT1231M/12 2021 Nowe kalkomanie 6 July, 02:18
Petya
zaznaczył ten element jako zamówiony
zaznaczył ten element jako zamówiony
F-4G Early (without DMAS) up to about 1985 interior 3D decals for MENG kit
Quinta Studio 1:48
QD48341 2023 Nowe formy 6 July, 02:03
Raingun
Pretty sceptical about the tank being "new tool" though. If the main dish is all-new why would ICM tease the crew with a seperate boxart before the tank?The red "special edition" band also reminds me of Dragon's blue "limited edition" band on 9037. A final hint is that if ICM has measured the AFU units they could have made one with local modifications to differ it from RFM or Border products (the latter being what may actually be in the box.)
Pretty sceptical about the tank being "new tool" though. If the main dish is all-new why would ICM tease the crew with a seperate boxart before the tank?The red "special edition" band also reminds me of Dragon's blue "limited edition" band on 9037. A final hint is that if ICM has measured the AFU units they could have made one with local modifications to differ it from RFM or Border products (the latter being what may actually be in the box.)
5 July, 15:16
Jonathon Fry
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Pz.Kpfw.II Ausf.B w/Interior (Magic Track, Bonus figure set, metal bucket, uniform and GEN 2 weapon)
Dragon 1:35
6572 2023* Nowe części 6 July, 01:58
Lenny Li
dodał nowy album.
dodał nowy album.
8 zdjęć/zdjęcia
How to paint a camouflaged tank in 24 hours before further weatheringNowy: 6 July, 01:49 1:35
1 6 July, 01:48
Lenny Li
I was asked in another group about this. I want to share my ways to paint a tank in one day:
1. Decide the base colour of the vehicle. Normally I paint it in dark grey for metal effect. Wait to dry completely or use a hairdryer to felicitate the drying process.
2. Spray two coats of hairspray for chipping. I found the cheap one in supermarket works really well.
3. Spray oxidized red, then dot-spray another layers of oxi-red highlighted with yellow for variation.
4. Spray water on top to react the hairspray. Use a hard brush poking the surface for chipping effect. Hairdryer to dry the model completely.
5. Spray clear coat to protect the work (Photo 1)
6. Masking areas using masking tapes or masking putty for camouflage pattern (Photo 2).
7. Spray hairspray (Step 2)
8. Spray grey green colour in different shades
9. Spray water for chipping (Refer to step 4)
10. Spray highly diluted clear green as filter and protection (Photo 3&4)
11. Repeat steps above for the yellow colour (Photo 5)
If you found the process above is too complicated, you can skip the hairspray part. Chipping can be done by hand painting.
The final steps need to use oil painting:
1. Use green, yellow, red colour for the camo patterns for highlights and variations.
2. Use black oil for shadows
3. Use white oil for fading and highlights.
At this stage the model is ready for further weathering work!
I was asked in another group about this. I want to share my ways to paint a tank in one day:
1. Decide the base colour of the vehicle. Normally I paint it in dark grey for metal effect. Wait to dry completely or use a hairdryer to felicitate the drying process.
2. Spray two coats of hairspray for chipping. I found the cheap one in supermarket works really well.
3. Spray oxidized red, then dot-spray another layers of oxi-red highlighted with yellow for variation.
4. Spray water on top to react the hairspray. Use a hard brush poking the surface for chipping effect. Hairdryer to dry the model completely.
5. Spray clear coat to protect the work (Photo 1)
6. Masking areas using masking tapes or masking putty for camouflage pattern (Photo 2).
7. Spray hairspray (Step 2)
8. Spray grey green colour in different shades
9. Spray water for chipping (Refer to step 4)
10. Spray highly diluted clear green as filter and protection (Photo 3&4)
11. Repeat steps above for the yellow colour (Photo 5)
If you found the process above is too complicated, you can skip the hairspray part. Chipping can be done by hand painting.
The final steps need to use oil painting:
1. Use green, yellow, red colour for the camo patterns for highlights and variations.
2. Use black oil for shadows
3. Use white oil for fading and highlights.
At this stage the model is ready for further weathering work!
6 July, 01:53
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo