Wiadomości
gorby
dodał nowy album.
dodał nowy album.
33 zdjęć/zdjęcia
Don’t get the hump - The Bedford Dromedary1:76
I did conciser having a go at hand writing the 2mm high number on the side of the cab…. took me a while to stop laughing...
Projekt: Bedford Dromedary.
20 13 July, 13:59
gorby
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorby
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunter
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorby
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
gorby
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
20 July, 14:57
gorby
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
21 July, 06:48
Christian Bruer
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
21 July, 13:54
gorby
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
21 July, 14:00
bughunter
A small piece of tarpaulin over the first bows would make it even more interesting.
No, it was a joke 🙂 Nice model of a vehicle with British style.
A small piece of tarpaulin over the first bows would make it even more interesting.
No, it was a joke 🙂 Nice model of a vehicle with British style.
22 July, 17:52
Michael Kohl
Thanks for CaptGPF for poiting out the scrstch building. I would have completely missed it and thus a very enjoyable build report.
One of those builds that would have looked really good without paint too.
I got stuck with my QLD over the humps as I did not manage to shape them identically. Your idea with the jig might breath in some life into that build again. Thanks for that too.
Thanks for CaptGPF for poiting out the scrstch building. I would have completely missed it and thus a very enjoyable build report.
One of those builds that would have looked really good without paint too.
I got stuck with my QLD over the humps as I did not manage to shape them identically. Your idea with the jig might breath in some life into that build again. Thanks for that too.
22 July, 18:35
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
Military Model Kit Series, No.8
Patriot PAC-3 Launching StationAoshima 1:72
009956 (00995) 2014 Nowe formy Cena jeszcze nie podana
22 July, 19:32
OSCAR HERRERA
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
M-107 / M-110 / M-578
Friulmodel 1:35
ATL-190 22 July, 19:31
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
22 July, 19:30
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
22 July, 19:29
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
22 July, 19:28
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
22 July, 19:28
Cory Sutton
posiada ten przedmiot
posiada ten przedmiot
M911 C-HET & M747 Heavy Equipment Semi-Trailer (For MENG SS-013)
Voyager Model 1:35
PE35951 2018 Nowe formy 22 July, 19:27
Tom Spiegelberg
dodał nowy projekt.
dodał nowy projekt.
2 9 June, 15:44
Tom Spiegelberg
Good question. The serial numbers are on the Furball Mig Master decal sheet. The other decals will come from other decal sheets and will also be painted.
The conversion kit from CAT4 looks great and is a big help for these project. It´s better than die Cutting Edge conversion kit.
Good question. The serial numbers are on the Furball Mig Master decal sheet. The other decals will come from other decal sheets and will also be painted.
The conversion kit from CAT4 looks great and is a big help for these project. It´s better than die Cutting Edge conversion kit.
9 June, 19:22
Rando
That's awesome. CAT4 also released a decal sheet for a VF-32 F-8D, maybe possible you could use that one. I'm cobbling together decals from the kit and Furball sheet on my RF-8 right now, I totally appreciate that creativity. I myself am super stoked about the CAT4 kit, gonna backdate so many Crusaders.
That's awesome. CAT4 also released a decal sheet for a VF-32 F-8D, maybe possible you could use that one. I'm cobbling together decals from the kit and Furball sheet on my RF-8 right now, I totally appreciate that creativity. I myself am super stoked about the CAT4 kit, gonna backdate so many Crusaders.
9 June, 19:43
Tom Spiegelberg
I also orderd the decal sheet from CAT4. The F-8D version on the sheet is great! Today I cut the wing top from the kit and made a test fitting with the new wing top from CAT4.The fitting is great. Much more better than the wing top from Cutting Edge. I also want to make a RF-8a from the USS Saratoga.
I´ll take some photos from the sets during the next days.
I also orderd the decal sheet from CAT4. The F-8D version on the sheet is great! Today I cut the wing top from the kit and made a test fitting with the new wing top from CAT4.The fitting is great. Much more better than the wing top from Cutting Edge. I also want to make a RF-8a from the USS Saratoga.
I´ll take some photos from the sets during the next days.
11 June, 19:51
Rando
Can't wait to see. What do you think of the nose shape? I ordered their sheets too.
Can't wait to see. What do you think of the nose shape? I ordered their sheets too.
11 June, 19:52
Tom Spiegelberg
I think that the nose shape is correct. I just ordered the new Vought ejection seat from CAT4 for my Crusader. After my holydays I can start my build.
I think that the nose shape is correct. I just ordered the new Vought ejection seat from CAT4 for my Crusader. After my holydays I can start my build.
22 July, 18:49
Rando
Before you get started, check out this correction which was released by the manufacturer:
CAT4 1:48 F-8 Crusader conversion - first look | Album by Rando (1:48)
I was given this through the eBay supplier and I also spoke to the maker directly
Bit concerning but hopefully the nose still fits together with a good shape
Before you get started, check out this correction which was released by the manufacturer:
CAT4 1:48 F-8 Crusader conversion - first look | Album by Rando (1:48)
I was given this through the eBay supplier and I also spoke to the maker directly
Bit concerning but hopefully the nose still fits together with a good shape
22 July, 19:26
Daniel Olson
posiada ten przedmiot
posiada ten przedmiot
MACROSS
VF-1S/A Strike/Super Gerwalk Valkyrie Do You Remember Love? Hasegawa 1:72
65726 (26) 2015 Nowe części 22 July, 19:21
Yarrick
posiada ten przedmiot
posiada ten przedmiot
MiG-29 SMT "Fulcrum" 9-19
Great Wall Hobby (GWH) 1:48
L4818 (GWH L4818) 2020 Nowe pudełko (wznowienie) 22 July, 19:21
OSCAR HERRERA
oznaczył ten przedmiot jako wystawiony na sprzedaż
oznaczył ten przedmiot jako wystawiony na sprzedaż
22 July, 19:21
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo