Wiadomości

Jan Janssen
Unusual subject wonder how it builds up, #following

Mr D
Thanks Jan 👍will update through build.
It's from the 1990's

Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??

David R. Meizoso
Beautiful subject, I'm also in!

Guy Rump
Following. 👍

Mr D
Thanks Grumpy Guy 👍👍 bit of a different one..

Skyhiker
Very nice

Ben M
👀

Mr D
Ben👋😀👍

Neil
Really nice work Mr D 💯 Following 👍

Mr D
Great Neil, 👋😀.... Thanks

J35J
Great progress! Following👍🏻

Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.

Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍

Michael Kohl
Following

Mr D
Thanks Michael 👋😀👍
Good to have you along ✈️

Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.

Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍

Mr D
Airliner Was the Tu-134

Guy Rump
Looking good, following. 👍

Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.

Mr D
Thanks to Everyone who has liked n taken an interest 👋😃👍.. Appreciate it 👍

István Szücs
Interesting project!

J35J
I'm in for the flash flesta 😅👍🏻

Robert Podkoński
Make yourself comfortable, István and J35J. This will be surely a long party... 😉

István Szücs
Robert, almost you'd build an A-Model kit

Robert Podkoński
Believe me, István, A-model kits are much more modeller-friendly than Mach 2... Take a look here, for example: modelingmadness.com/..korean/us/hammx2.htm

Ben M
Another member of the non-aligned movement.

Marko
That's something to be excited about. Mach2 kits don't have the reputation of being shaking kits. 👍

Martin
As I said on the project, I wish you luck with this, it is something you seldom see, but it looks cool in the end. It is quite a long time ago when I did mine - al the best!

and, so far it does not look that bad for a mach2

S M
Gotta see this! 😄

John Hughes
This looks very Gerry Anderson, so I'm in!

Robert Podkoński
What an audience I have... I feel a bit under pressure now 😉 @Martin - you're right, at least the polistyrene seems to be of a good quality.

Guy Rump
I'm watching as well Robert 🙂 👍

Ekki
And me.

Robert Podkoński
Feel warmly welcomed, Mates!

Mid Franconian
Extra like for the striking project title 😂! I expected an old KP kit first…

Bruce Huxtable
Soo many seams.... Watching this tutorial for sure 😉. OMG, Robert, that's quite a critique of MACH, kits.... Good Luck!

Ben M
It's such a cool subject, I remember seeing it in my dads airplane books when I was young.

Ludvík Kružík
Robert, once again you have chosen a great topic. The French experimental jet powered Leduc aircraft looked really futuristic at the time of its creation.
I wish you strong nerves and a lot of fun building your model!

Robert Podkoński
Now I feel even more pressure 😉 ... @Bruce - I know what I am talking about, I have completed a few models from both producers already 😉 @Ludvik - I was lucky enough to see both Leduc 010 and 022 in Le Bourget museum and they still look futuristic imho 🙂

Palo M
Grabbing a sear

Robert Podkoński
Welcome, Palo!

Ludvík Kružík
He certainly wouldn't be a disgrace as a space fighter in Star Wars. 😄

The photos of the kit parts show that you really have a lot of work ahead of you.

John Hughes
Not Star Wars, more Flash Gordon by the looks of those sprues!

Neil
Hi Robert, Haha! 'da Putty Party'... Love it!... Following with great interest 🙂

Robert Podkoński
Feel welcomed to the party, Neil - every party needs a DJ 😄

Neil
Thanks Robert. I'm there mate! 🎧🤘🎶

Ben M
Those parts look gloriously terrible

Robert Podkoński
Still, the plastic is workable, Ben. As far as I have checked: it can be filed, filled, and glued... So, there is hope... 😄

Ben M
I looked in the stash and I have a mach2 kit I bought when I was young and foolish.

Robert Podkoński
I have five, not counting this one... Hmm...the testimony of what kind of mental disease it is? Nothwithstanding, only Mach 2 offered models of some exotic planes, like X-24.

gorby
I wish you luck Robert. Your going to need it (and probably a stiff drink or four). 😉
Was the kit mould made from soap? 😄

Robert Podkoński
Thanks for your encouraging words, Gorby! ... It seems probable, taking into account that in some Mach 2 kits the material itself is "soapy"... 😄

Alex K
A French prototype and a Mach 2 kit? Can't miss that... I see I'm late but a seat way back in the gallery must be still available...

Jennifer Franklin
I am taking a seat in the gallery myself.

John Hughes
Jennifer? We thought you were missing in action!

M0rce
Looks interesting 🤔

Robert Podkoński
Feel warmly welcomed, Alex, Jennifer and M0rce! I am glad to have you all aboard. @Alex - I have started this album yesterday, so you're not late 🙂

Greg Baker
I'm in!

Nicolas
I'll take a seat.

Robert Podkoński
Welcome, My Friends!... I was not prepared for such an audience 🙂

Greg Baker
Don't worry, Robert. We brought our own snacks!

Robert Podkoński
Good for you 😄

Gary Victory
That's nasty....! Good luck with your build. Robert. Take your time and enjoy it.

Roland Sachsenhofer
You are a brave man! I will definitely be watching this with great interest - great!

Robert Podkoński
It is great to have you both aboard, Gary and Roland!

Łukasz Gliński
What a party I've been missing, till now. Wishing you lots of perseverance, mate 👍
PS. Are you going to add the Broplan's Languedoc later on? 😄
[img1]

Robert Podkoński
Welcome, Łukasz. I've been waiting for you 🙂 I don't think so - not enough space, time, skills, and I am not sure if the kit is still available
Sud-Est S.E. 161 Languedoc (Broplan MS-146, 1:72)
BTW. On the photo you posted, there is the earlier of Monsieur Leduc's creations - model 010.

Łukasz Gliński
Got one of them from a shop in the Netherlands in unpronounceably named village near Schiphol, not sure they still offer them
Fingers crossed for your Mach2 endeavour 👍

Robert Podkoński
Lucky you! So, perhaps you will assembly the Languedoc...and then we will join your forces, Łukasz? 😉

Michael Kohl
That's gonna be fun to watch. Only bad modellers need good kits. 😉

Łukasz Gliński
Not sure, mine has to be Polish marked 😛 If I ever come to assemble it 😄

Robert Podkoński
I've been waiting for you too, Michael 😉

Finn
Following

Robert Podkoński
Welcome, Finn!

Mirko Römer
Holy...good luck! 🙂

Robert Podkoński
Thanks, Mirko!

Juergen Klinglhuber
HA-- I had done this once (Leduc 021 | Album by jott (1:72)) and....OMG. Therefore I like the head-line of your album and... I done know how to put it: good that you take it with humor 😉

Hanno Kleinecke
Robert - You are a brave man for sure……

Robert Podkoński
Thanks for encouraging me, my friends 🙂

Ludvík Kružík
Robert, you're handling this brilliantly. I wish you continued success with the construction...
... and that your supply of putty and sandpaper lasts. 😄

Robert Podkoński
Thank you, Ludviku... perhaps some substantial amount of thick CA glue as well...

scalemates
what was your old account?

Geordie M
Hi again,
tell you what..if its to much trouble then I can select my stash again.
Its really not to much to do. I like the site so I can fix it by just using
my login as it is.
I hope I havnt been to much of a bother for you.
all the best
Brian (AKA Geordie M)

scalemates
It is easy if I know your old account

Guy Rump
Interesting build, following! 👍

J35J
Thanks Guy, welcome to the project!

Bruce Huxtable
Welcome, Villiers. I'll finish the motorcycle then stat the figures. I also have the Gama Goat driver to work on....

Bruce Huxtable
Welcome, Duke, et al. I've painted the engine, wheels and frame parts, and started assemply. Piccies soon....

Bruce Huxtable
Many thanks for your 'likes', mates. No progress til next weekend....

Robert Podkoński
Taking a ride 😉

Bruce Huxtable
Always welcome, Robert. I'm just waiting for someone to ask if I'm going to add any cables and pipes....

Robert Podkoński
Are you? 😉

Bruce Huxtable
Maybe one or two...... 😉

Bruce Huxtable
Lots of piccies from today's progress. Figures next weekend 😉

Guy Rump
Looking great, following. 👍

Robert Podkoński
(You've forgotten to mention brake lines, Bruce, when enumerating the remaining bits in the comment to the photo #5 😉 )

Robert Podkoński
Taking a seat, of course!
(Perhaps the transparencies and propellers from this kit would work:
Soviet Tu-2 Bomber (HobbyBoss 80298, 1:72))

Thomas Kolb
Thank you Robert! The three-bladed standard propellers in the kit are actually fine, it is the transparencies I am a bit worried about.

Łukasz Gliński
Me 2, must watch this - wondering how good/bad this kit is

Dave Flitton
Watching!!

J35J
Me 3, this will be another great build to follow.

Cuajete
Me 5!
I still don't understand why they haven't released a more updated tool for this model yet.

Moreno Baruffini
Thomas, you are a specialist in reminding me the models I started and non finished (yet)! Super inspiring, and a great build to follow for sure!

Thomas Kolb
Dear friends, thank you for your interest. I am a bit curious myself how this model will turn out - I have read some pretty nasty things about it in reviews, but I am not sure it's so bad. It certainly looks very intricately designed, not your usual shake 'n' bake kit for sure.

Gergő Takács
Thomas, you are doing always the same project what I want to do in the future with the same kits. 😀 I'm always taking a seat and save your work for motivation.

Finn
I'm in

Łukasz Gliński
Thomas, your tutorial is priceless! 👍

Mr D
Like this 👍👍
Big fan of soviet n russian stuff, will have to look up history on this one as new to me.
Interesting subject, Nice 😁

Cuajete
Good start, Thomas. Thank you so much for your tutorial 👍

Thomas Kolb
I must say, I am pretty impressed with this kit so far. At first sight it looked like an Amodel kit, but everything is very cleverly designed and all parts fits together beautifully without any problems. The only gripe I have is with the plastic itself - it's very soft and stretchy and definitely does not like to be sanded.

Nicolas
Nice start, joining.

Живко Джаков
I'm here too. I have one in a box and we only see each other with it 🙂

Cuajete
Great job so far, Thomas 👍
I never bought this kit because I thought it would be difficult to deal with.

Thomas Kolb
Cuajete, I must say, I am pretty impressed with this kit so far. At first sight it looked like an Amodel kit, but everything is very cleverly designed and the parts almost fall together by themselves without any problems. The only gripe I have is with the plastic itself - it's very soft and kind of stretchy, and all sanding needs to be followed by polishing to result in a smooth surface.

Cuajete
Thanks, Thomas. I'll have to consider buying the latest ICM box 👍.

Cuajete
Good progress, Thomas 👍

Mr D
Looking good 👍, the canopy is fine, be ok when all printed up, fits fuselage well, the canopy on the Revell FW-190 l did was horrendous!! Would be good for bathroom privacy glass 🤣.
What glue do you use to fix canopy??

Thomas Kolb
Mr D, Thank you! I used regular Revell styrene cement (the blue one with the needle tip). Just added a string of solvent around the fuselage edges and then placed the canopy on. I normallt use water-based cement for transparencies to avoid fogging, but if you are careful, it's not a problem to use solvent based cement.

Mr D
Brilliant thank you 👍👍

Thomas Kolb
Using the precut masks would be so much easier if they actually fit the model... But the flight deck glasshouse parts seem to be designed for a different kit, so I am back to using Tamiya masking tape.

Guy Rump
Looking great! 👍

Cuajete
I agree with Guy 👍

Mr D
Always the tedious part !! But looking like nice mask job.
I usually put a masking fluid over joined parts if l can, lve had paint blow under before.. as it doesn't stick to it's self that good.
On the Beriev I'm doing now, l masked most individual windows out, but the big curved window at front was bit fragile!! So I'm going to use my mega fine Nail liner brush to carefully paint frame in.
Like the underside colour, good luck on next steps 😃👍👍