Wiadomości

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂

Roland Sachsenhofer
That's great, that's how it should be, because your construction progress here gives me inspiration 🙂

Juergen Klinglhuber
Ju86 just left the paint hangar,...

Alec K
The metal finish looks great, has nice variation to it 👍

Thomas Kolb
I agree with Alec, the metal surface looks very realistic in the photos!

Cuajete
I agree with Alec and Thomas. Great metallized! 👍

Juergen Klinglhuber
Thank you Alec, Thomas & Cuajete. When I had finished I thought: "Grab, overdone. This bird was for sure not that worn as it went to the airshow more or less fresh from the manufacturer." But the more looked at it the more I was okay with the result. So your comments are welcome and soothe my concerns. 👍

Nicolas
Don't worry Juergen, even on new airplanes there are sometimes clear visual differences in the sheet metal. For example, some manufacturers deburr the rivet holes with a grinding machine, the sheets are made of different alloys or are applied with different rolling directions, all of which have an influence on the appearance. I like it.

W Szczecinski
I'm using Tamiya acrylics white (and also yellow). Sadly due to the color specifics (or pigments) it's realy hard to achieve a perfect coverage in just one coat. AmmoMig OneShot Primer white gives nice white finish.

Mr D
Hi, thanks for replying 👍👍
Really appreciate the advice... I'm only a year in the hobby so tips really help 😃

W Szczecinski
I love working with Tamiya acrylic paints as they are very easy to brush on and very forgiving when airbrushed. Color choice is limited but this is when and where other brands come handy. My first choice to go for would be Ammomig and or AK Real Colors. Ammo comes in bottles ready to be airbrushed straight away where AK (and tamiya) need to be thinned before airbrushing. Oh, Mr Color/GunMetal is also worth noting.

Mr D
Brilliant 👍👍 thanks for that .

Ben M
I find tamiya white primer to be the best… but it's not airbrushable, it's rattlecan.

Mr D
Thanks Ben👍
I watched a long video on YouTube....it was testing lots of different White's from different companies. AK Intense white came out in top 3,
I got a bottle and it's been fantastic, l do X2 coats n it's done... Night n day difference from Velejo White,
I'm generally happy with Velejo, but the white n yellow are bit poor.
I have Tamiya Yellow, but is bit thick !!
Is it true you can thin Tamiya with Isopropanol??
Thanks for helping...
Im going to be building the IAR-80 soon and has yellow in-it... Luckily it's a pale yellow.

Harald Besold
Starts promising! Nice details. 👍

Harry Eder
Great start! I´ll take a seat 🙂

Daniel Mysak
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.

Alec K
What! No rotor blades? 😂. I am in, nice detailing as always 👍

Hajo Lippke
Great, another Ronan-project!

Oleg Bogolei
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...

Maciej Bellos
I am in too. Source of inspiration this build will be 😄

Łukasz Gliński
Been waiting for this 👍

Patrick Hagelstein
Oh yes! A combo of Ronan and Intruder: obligatory to follow! 🙂

Ronan
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two

Ronan
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html

Sergej I
AWESOME! 👍

Maciej Bellos
Oh WOW!

Juergen Klinglhuber
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!

Ronan
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good

Skyhiker
Another straight out of the box build I see. 😉

Bas Tonn
Great, can't wait for more pics

Ronan
Many thanks,
The build keeps on quietly 😉

Alec K
Nice progress, the cockpit looks amazing 👍

Ronan
Thanks Alek 😉

Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉

Oliver Zwiener
Take a seat

Patrick Hagelstein
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼

Michael Kohl
Following

Alec K
It's looking excellent 👍

Eric Duval
Joli travail 🙂

Ronan
Merci camarade 😊

Ronan
😉

Skyhiker
These planes always remind me of giant bugs for some reason.

Ronan
I think it looks like a tapdole 😉

Bernd Grün
Nice progress, Ronan! 👌 Looking for the final result.

Ronan
Thanks Bernd, i hope to finish it very soon 😉

Skyhiker
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉

Micky
Love the Intruder Ronan. Nice cockpit and build so far!!

Palo M
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂

Is the "Hobbyboss" in the album title a joke or a mistake?

Ronan
Of course , it is a mistake : the correct title should be trumpeter 😉

Ronan
although Hobbyboss and Trumpeter are the same company ...

Ronan
The decals step is done 😉

Guy Rump
Looking great, I know I'm late but following. 👍

Spanjaard
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....

J35J
Great progress, another gem from you!👍🏻

Ronan
Many thanks 😉

Palo M
Fantastic and clean work, verry impressive!

Alec K
It's looking glorious Ronan 👍

Ronan
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.

Shar Dipree
Looks great so far. 👍

Eric Duval
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂

Ronan
Merci Eric,
Je ne sais pas s'il va être incroyable mais il devrait être sympa 👍

Ronan
That's it, I finished it 😉

Spanjaard
fantastic, congratulations

Eric Duval
Ben voilà, il est magnifique 🙂

Patrick Hagelstein
Magnificent! 👌🏼

DerMattes
Fantastic build!

Harry Eder
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?

Shar Dipree
Great result. 👍

Ronan
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂

J35J
Excellent work! Congrats👍🏻

Micky
Masterpiece!!

Oliver Zwiener
Klasse Ding !

Łukasz Gliński
Outstanding, love that hi-vis USN/USMC camo 👍

WAHO LEU
Great Job. I loving it.

Ronan
Many thanks, mates 👍

Michael Kohl
I am starting to like the Intruder and I definitely like your model of it.

Alec K
Outstanding and inspirational build 👍

Ekki
Excellent!

Juergen Klinglhuber
Ronan - real great job 👍 👍

Ronan
Many thanks, mates 😉

Tibor Szilvai
Superb! 👍

Daniel Mysak
Great looking Intruder👍

Thomas Kolb
That looks spectacular! I really like the folded wings! And the painting with that careful weathering is beautifully done. I wouldn't have been surprised if it was 1:48.

Ray Loch
This level of detail and paint quality in 1/72, Bravo. Hoping my 1/48 turns out this well.

Ronan
Many thanks all for nice coments 😉

Guy Rump
Excellent modelling, I look at it in awe! 👍

Music_On
There are a lot of amazing models here on Scalemates.com, but yours is exceptional! Little things like making sure the forward landing gear doors are correctly opened for the "cold" state of the jet, the hydraulic lines, etc., not to mention immaculate finish. At first glance I thought it was 1/48! I hope you compete this at a show, it's a winner for sure!

NICOLAS GRANDMONTAGNE
Encore une superbe réussite!
Bravo Ronan! 😃

Donald Dickson II
There is nothing you ever put out that isnt beyond excellent.

Torsten
I'm in

Christian Bruer
Klasse geworden 👍

Marc .
Stunning build!

Dieter Bihlmaier
Christian and Marc . I appreciate your comments. Thanks !

Rui S
That's a Beauty, indeed 👍

Curatorm
Very smart!

CaptGPF
A real stunner! Love the wear on that bird!

Mr James
CaptGPF has got it spot on 👍

Jan Peters
Very nice indeed 👍🏻👍🏻

Neuling
Looks like the real thing. Very good photos!

Pietro De Angelis
Awesome work, congrats!

gorby
I agree with Spanjaard.
I previously only built 1/48 models. Now I've switched to mostly 1/72 because I find them more of a challenge to build and detail. I'm much more impressed with very detailed small scale builds than I am with larger scale models. Some of the 1/72 and smaller models I've seen on Scalemates are phenomena, not toy-like at all.

Martin Oostrom
Depends on the quality of the build. A 1/32 plane smothered in thick acrylic paint can look a whole lot worse than a 1/72 Christian Bruer build.

Kesa Tiho
True but just the size of 1/72 scale planes are the perfect size to hold in your hand and play with like a metal diecast plane. Plus with the quality that some builders put into their builds they do look and feels like pre builded planes.

Martin Oostrom
google.nl/search?sca..LSM&vssid=mosaic

Most of these look like 1/48 or larger to me 😉