Wiadomości
Christian
posiada ten przedmiot
posiada ten przedmiot
USAF Aggressors Now.. And Then
Caracal Models 1:48
CD48228 2023 Nowe formy Więcej niż jeden temat (4)17 October, 11:27
Akos Berkesi
ukończył ten element
ukończył ten element
Supermarine Spitfire Mk.Vb & Messerschmitt Bf109E Dogfight Doubles
Airfix 1:48
A50160 2014 Nowe kalkomanie Więcej niż jeden temat (2)17 October, 11:27
Clifford Keesler
dodał nowy album.
dodał nowy album.
19 zdjęć/zdjęcia
Lockheed U-2A Dragon Lady1:48
Finally Finished. Aircraft modeled is a U-2A from the 4080th Strategic Reconnaissance Wing, Laughlin AFB. This aircraft ...
Projekt: U-2 A Dragon Lady
17 17 September, 01:31
Clifford Keesler
Welcome Nathan, Augie and John. @ John, no it means Ready to build., once I have everything I want as far as aftermarket stuff I put it all in the box and mark it RTB so I know everything is there. Otherwise I sometimes end up buying stuff I already have. A quick update on this one, paint and decals are done and and sealed. Waiting for anti-glare panel to dry and I will apply the wash. So getting near the end on this one. I will try and get some more pictures up soon. Spoiler, I did not do the box art version.
Welcome Nathan, Augie and John. @ John, no it means Ready to build., once I have everything I want as far as aftermarket stuff I put it all in the box and mark it RTB so I know everything is there. Otherwise I sometimes end up buying stuff I already have. A quick update on this one, paint and decals are done and and sealed. Waiting for anti-glare panel to dry and I will apply the wash. So getting near the end on this one. I will try and get some more pictures up soon. Spoiler, I did not do the box art version.
8 October, 01:30
Gary Ess
posiada ten przedmiot
posiada ten przedmiot
Bronco Half Cab with dune buggy & trailer
Revell 1:25
85-7228 2021 Zestaw łączony Więcej niż jeden temat (1!!)17 October, 11:21
Edouard Carr
dodał nowy album.
dodał nowy album.
69 zdjęć/zdjęcia
Iron Maiden - Aces HighNowy: 16 October, 16:05 1:32
Eddie getting comfortable
Projekt: Iron Maiden Aces High
23 12 August, 17:43
Edouard Carr
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
Hey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Sean
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
Up the Irons! I gotta get started on my kit one of these days... Lookin' good so far!
29 September, 21:49
Edouard Carr
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
Cheers guys will soon be trying to figure out how to make custom decals using paper I bought yonks ago! Any tips and tricks would be appreciated 😉
4 October, 10:19
Alexander Grivonev
"Chubaca's human brothers" Eddie won't be happy about this comparison 😄
"Chubaca's human brothers" Eddie won't be happy about this comparison 😄
4 October, 11:11
Munkyslut
I built this one a few years ago, no where near this standard tho! Excellent work on Eddie & the cockpit👌👌
Watchin!
I built this one a few years ago, no where near this standard tho! Excellent work on Eddie & the cockpit👌👌
Watchin!
11 October, 17:25
Edouard Carr
Thanks Munky, I wouldn't be so hard on yourself you did a bang up job on yours! Glad your enjoying the build and I hope the final outcome comes off like I hope!
Thanks Munky, I wouldn't be so hard on yourself you did a bang up job on yours! Glad your enjoying the build and I hope the final outcome comes off like I hope!
11 October, 20:57
Edouard Carr
Hey Mr D
They have been easy to print and super quick to detach from the backing compared to official decals. Interesting to play with but a note to the wise, figure the decals you want and their placement as transparent decals will only be visible on light colours. See my body art for an example!
You then have the issue of how to get round this, which I have yet to decide the best method. Thinking maybe a top coat then a second run through the printer!
Both white and transparent paper are hard to adhere to bumps on the surface without creating bubbles, think this might be A: thickness B:my poor application (more likely 😅).
I need to find some junk kits to do some proper testing before I next use them on a project I think 🤔
Hey Mr D
They have been easy to print and super quick to detach from the backing compared to official decals. Interesting to play with but a note to the wise, figure the decals you want and their placement as transparent decals will only be visible on light colours. See my body art for an example!
You then have the issue of how to get round this, which I have yet to decide the best method. Thinking maybe a top coat then a second run through the printer!
Both white and transparent paper are hard to adhere to bumps on the surface without creating bubbles, think this might be A: thickness B:my poor application (more likely 😅).
I need to find some junk kits to do some proper testing before I next use them on a project I think 🤔
17 October, 08:45
Mr D
Thanks Edouard 👍👍
Good luck with it, sometimes double printing can off-set a little so make sure paper 100% straight.
😃👍
Thanks Edouard 👍👍
Good luck with it, sometimes double printing can off-set a little so make sure paper 100% straight.
😃👍
17 October, 09:04
Edouard Carr
Know that for a fact, worked as a printers assistant for a time and adding gold elements required a method of double printing, was a nightmare 🤣
Know that for a fact, worked as a printers assistant for a time and adding gold elements required a method of double printing, was a nightmare 🤣
17 October, 11:19
Vassk9
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Sandbagged Shermans of the 14th Armored Division
Echelon Fine Details 1:35
D356219 17 October, 11:19
Christophe Ameline
posiada ten przedmiot
posiada ten przedmiot
Roman Gladiator
Verlinden Productions 120mm
953 17 October, 11:17
Romain Sablou
dodał nowy album.
dodał nowy album.
94 1 May, 11:47
Romain Sablou
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again
8 May, 17:37
Alec K
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍
9 May, 12:09
Gary Victory
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.
6 June, 06:54
Romain Sablou
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌
6 June, 07:38
Jakub Fiala
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.
14 June, 18:49
Romain Sablou
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌
29 June, 17:04
Romain Sablou
Thanks guys, glad to finally paint something after all this preliminary work !
Thanks guys, glad to finally paint something after all this preliminary work !
16 July, 14:35
Spanjaard
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!
14 September, 22:17
Romain Sablou
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏
15 September, 10:15
Gary Victory
Totally echo Roberts's comments. Awesome work so far on this build Romain.
Totally echo Roberts's comments. Awesome work so far on this build Romain.
16 October, 07:31
Romain Sablou
Many thanks everyone ! It means a lot during this time consuming project. The finish is acheived by cleaning and polishing the model prior to paint stage. Then by using well diluted paint for thin and smooth coats of paint.
Many thanks everyone ! It means a lot during this time consuming project. The finish is acheived by cleaning and polishing the model prior to paint stage. Then by using well diluted paint for thin and smooth coats of paint.
16 October, 16:10
Gary Victory
NMF finishes are more work, but so much more rewarding when done. Super metallics for me definitely the metals paints available.
NMF finishes are more work, but so much more rewarding when done. Super metallics for me definitely the metals paints available.
17 October, 06:25
CaptGPF
Agree with Alex, the invasion stripes are sooowell done. Roman - how are the Mr Hobby metallics compared to the AK Xtreme metals?
Agree with Alex, the invasion stripes are sooowell done. Roman - how are the Mr Hobby metallics compared to the AK Xtreme metals?
17 October, 10:54
Romain Sablou
Thanks mates 🙂
Mr. Hobby Super Metallic pros : much stronger during weathering steps. cons : dilution can be tricky, not much choices in shades.
AK pros : more variety of color , perfect pre dilution for airbrush, cons : very sensitive to solvant during weathering, high drying time.
Thanks mates 🙂
Mr. Hobby Super Metallic pros : much stronger during weathering steps. cons : dilution can be tricky, not much choices in shades.
AK pros : more variety of color , perfect pre dilution for airbrush, cons : very sensitive to solvant during weathering, high drying time.
17 October, 11:13
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo