Wiadomości
Roland Sachsenhoferdodał nowy album.
47 7 July, 08:59
Roland SachsenhoferWith these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunterWatching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland SachsenhoferThanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Roland SachsenhoferThe fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.
11 July, 07:09
bughunterYes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂
12 July, 16:49
Roland SachsenhoferThank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....
14 July, 08:57
Roland SachsenhoferThe Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.
18 July, 11:56
bughunterThe stripes are great - can be noticed, but both shades still looks like aluminium which it was.
18 July, 14:53
Roland SachsenhoferThank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!
18 July, 18:15
Ludvík KružíkRoland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍
20 July, 14:02
Roland SachsenhoferLudvik, thank you for this comment, giving me a push to get the finishing steps done!
21 July, 06:54
Roland SachsenhoferA few steps closer to a finish: working with Roden decals is always an adventure, happy end not guaranteed! The whole thing is spiced up by the corrugated metal nature.... Well, this is the result; I will of touch up up the unclean parts with a brush, but on the whole it will stay like this - now for the signs of use and wear!
25 July, 08:01
Roland SachsenhoferThank you! 🙂
The Junkers D.1 is slowly approaching its final appearance - and that didn't work out quite as well as I had imagined! But what the heck, there are some nice things, like the turnbuckles or the two MGs from Gespatch; I'm also happy with the solution for the typical Junkers handles and footrests: a thin, glued-on metal rod was covered with finely cut Tamiya tape as a ridge. Well. I am satisfied with this overall impression.
26 July, 19:22
Ludvík KružíkAs the work progresses, Junkers grows in beauty. Thanks to decals and small details the model looks better. 👍
26 July, 22:09
Roland SachsenhoferThe Junkers D.1 from Roden is now finished, in a way my corrugated metal test run for the somewhat larger Junkers F.13 from Mikro Mir. There are enough problem areas - and also a few insights into how I can proceed better with the F.13, but even so I am surprised by the 'photogenicity' of the little fighter from the last days of the First World War! The markings, which are limited to the bar crosses and two '11s' on the rear of the fuselage, come from the Wingnut Wings documents; they show an aircraft from October 1918, i.e. shortly before the end of the war. Remarkable (and also a reason for my choice) are the 'tiger stripes' due to different metal panelling on the wings, which show up in the right light. I hope you like the pictures, I really enjoyed building it!
30 July, 15:36
Nick DragoneExcellent build and photography. It would have taken me months to build this. Nice work
30 July, 16:07
Michael Kohlvery nice and convincing weathering. Great outdoor and hangar shots. A joy to watch.
30 July, 19:09
Arseny K.Very inspirational in-progress and built model pictures! Exceptional example of modeling art 👏🏼
31 July, 07:31
NeulingWellblech ....... das muß eine Junkers sein 🙂 Cool pictures and perfect build ..... this must be a Sachsenhofer
31 July, 08:16
Roland SachsenhoferHi mates, I am really impressed and greatly pleased with your comments - thank you very much for this encouragement and motivation! To receive such feedback from highly esteemed modellers means something and makes me.... well, a little bit proud!
31 July, 09:06
Arseny K.@Roland, can you please share the know-how on making those realistic background photos? Thank you
31 July, 10:04
Romexchciałby nabyć ten przedmiot
Airbrush Camo-Mask for ATF Dingo 2A2 Camo Scheme 1
J's Work 1:35
PPA5117 31 July, 10:05
me109g10Will it have solid wheels for the howitzer and truck? Thats the selling point for me. Dont want to pay double for Resin or plastic wheels because they have the shitty rubber ones that crack after a few years.
CCKW-352 w M2A1 Machine Gun Turret Version
I Love Kit 1:35
63567 2024* Nowe części Więcej niż jeden temat (1!!)30 July, 13:08
Top Agent PGG jr.Since the truck of this kit is based on the HobbyBoss version, the wheels should be plastic instead of rubber. Cannot say the same for the M2A1 gun though.
Regarding rubber wheels, the only bad ones I have are from Takom which can melt into the plastic. It is one of the reasons I have to discard any kit from Takom which has rubber wheels. Binned three German Civilian Car kits from Takom costing a total of SGD $75.00 and had to immediately sell the Volkswagen T3 van from Takom which the vehicle frame already had damage from the rubber wheels.
31 July, 10:02
ICM 1:35
Wouter Roerdinkdodał nowy album.
57 zdjęć/zdjęcia
The first, the last and the many: The Mk.Vb
1:24
Projekt: The first, the last and the many
6+ 20 15 July 2022, 10:33
Andy BallLovely brace of 24th Spitfires there!, I'm currently wrestling with the Airfix Mk.1a that you have completed. They look so impressive in this scale, well done!
15 July 2022, 12:11
Jan Hoosdodał nowy album.
6 zdjęć/zdjęcia
Trumpeter U-boat
1:48
When finished i mount it to the wall, just on the waterline, i think. But first i must finish it!
Projekt: The big one! Trumpeter uboat 1:48
14 8 July, 14:08
CaptGPFHoly cow! I didn't think it were even possible to make a sub kit that big! following!
8 July, 14:22
Jan HoosHahahahah no John, i will place it at the wall when finished. The wall is ready for it as you can see in the album
17 July, 10:07
JohnThat will look cool up there, just make sure it's secure as it might give you a concussion if it falls on you!
17 July, 14:41
Wouter Roerdinkdodał nowy album.
59 zdjęć/zdjęcia
The first, the last and the many: the Mk, IXb
1:24
Projekt: The first, the last and the many
6+ 9 4 March 2023, 18:50
Albi Hitzposiada ten przedmiot
B-25 Mitchell, Vol. 1 The A through D Models in World War II
Legends of Warfare: Aviation Nr. 54
William Wolf
2022 31 July, 09:51
Albi Hitzposiada ten przedmiot
B-25 Mitchell, Vol. 2 The G through J, F-10, and PBJ Models in World War II
Legends of Warfare: Aviation Nr. 56
William Wolf
2022 31 July, 09:51
Albi Hitzposiada ten przedmiot
B-17 Flying Fortress, Vol. 2 Boeing's B-17E through B-17H in World War II
Legends of Warfare: Aviation Nr. 41
David Doyle
2021 31 July, 09:51
Jamie Struckchciałby nabyć ten przedmiot
IDF AFV Towing Horn & Chain Set for IDF AFVs
Legend Productions 1:35
LF1340 31 July, 09:50
Jamie Struckchciałby nabyć ten przedmiot
IDF AFV Rear Towing Horn/Chain Set
Legend Productions 1:35
LF1352 31 July, 09:50
Wouter Roerdinkdodał nowy album.
7 zdjęć/zdjęcia
The Spitfire Mk.Ia
1:24
Projekt: The first, the last and the many
6+31 July, 09:48
Lukas Mullerdodał nowy album.
106 24 October 2022, 22:27
Lukas MullerYop, highly detailed and realy good kit 👌🏽 I want to buy another one
26 October 2022, 19:47
Lukas MullerThank you guys! Should be winter camo so i will see the result in the end 😀
2 December 2022, 17:19
Michael Kohlalmost a pity that the expert weathering covers so much of the expert camo.
28 December 2022, 12:34
Lukas MullerThank you Michael for your opinion. Another Tiger will be without winter camo 😄
28 December 2022, 13:15
Eddy MarshallI honestly thought I was looking at a 35th scale model... Then I saw the matchstick...! Well done mate...! Are you permanently cross eyed now..?? Lol
7 January 2023, 15:05
Simon NagorsnikWhat should i say?!
Besides: perfect work! 👏
Yes, better than some 1/35'.
8 January 2023, 19:26
Spanjaardholy moly, i thougth it was a very nice 1/35 until Eddy's comment made check the scale.... 1/72! amazing
8 February 2023, 11:14
HSC1932Great job! I saw some other complain that the coaxial mg hole wasn't pre-drilled. Was yours?
21 December 2023, 13:27
Simon NagorsnikHey comrade! Applause, applause, applause!!
👏👏👏
I forgot to say that I the base looks great 👍
25 April, 16:11
Jamie Struckchciałby nabyć ten przedmiot
IDF 2x, 3x & 4x .30cal Ammo Box Holder
Accurate Armour 1:35
A179 31 July, 09:44
Andrej Bassichchciałby nabyć ten przedmiot
US M4 Sherman T-54E1 Workable Track Link w/ Duckbill Track Extenders
Gecko Models 1:35
35GM0094 2024 Nowe formy 31 July, 09:42
Andrej Bassichchciałby nabyć ten przedmiot
US M4 Sherman T-49 Workable Track Link w/ Duckbill Track Extenders
Gecko Models 1:35
35GM0095 2024 Nowe formy 31 July, 09:42
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo