Wiadomości
![](/profiles/img/10148-258-s.jpg)
dodał nowy album.
1 25 August, 10:13
![](/profiles/img/10148-258-s.jpg)
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂
25 August, 10:20
![](/profiles/img/user-s.jpg)
posiada ten przedmiot
![Latin American Fighters (Harpia Publishing ) Latin American Fighters (Harpia Publishing )](/books/img/7/1/6/110716-10000-26-t180.jpg)
Latin American Fighters A History of Fighter Jets in Service with Latin American Air...
Inigo Guevara, Moyano Guevara
2009 25 August, 11:00
![](/profiles/img/user-s.jpg)
posiada ten przedmiot
![Arab MiGs Volume 4 (Harpia Publishing 4) Arab MiGs Volume 4 (Harpia Publishing 4)](/books/img/9/2/5/105925-10000-31-t180.jpg)
Arab MiGs Volume 4 Attrition War, 1967 - 1973
Arab MiGs Nr. 4
Tom Cooper, David Nicolle, Lon Nordeen, Patri...
2013 25 August, 11:00
![](/profiles/img/user-s.jpg)
posiada ten przedmiot
![Arab MiGs Volume 5 (Harpia Publishing 5) Arab MiGs Volume 5 (Harpia Publishing 5)](/books/img/9/2/6/105926-10000-72-t180.jpg)
Arab MiGs Volume 5 October 1973 War: Part 1
Arab MiGs Nr. 5
Tom Cooper, David Nicolle, Holger Müller, Lon...
2014 25 August, 11:00
![](/profiles/img/14793-564-s.jpg)
chciałby nabyć ten przedmiot
![1:32 F-86F-30 Sabre (Kinetic K3202 2009) K3202 2009](/products/img/8/0/2/931802-30596-84-t180.jpg)
F-86F-30 Sabre Special Edition - RCAF Golden Hawks Sabre Mk 5
Kinetic 1:32
K3202 2009 2009 Nowe kalkomanie 25 August, 10:57
![](/profiles/img/33725-199-s.jpg)
dodał nowy album.
2 25 August, 08:05
![](/profiles/img/33725-199-s.jpg)
Started a few days ago, AK here has made a great job,excellent exterior but also interior detail too!Many parts at every step and good fitting so far without any problems.
It's going to be a vehicle from British European Airways, Heathrow airport 1973.
After 6 hours of working time I have managed to complete the chasis, engine and most of the cabin too.
25 August, 10:56
![](/profiles/img/142246-931-s.png)
dodał nowy album.
11 4 August, 19:21
![](/profiles/img/28909-839-s.png)
Dryfit the front window early in your build. I've heard rumours of a horrible fit near the engine intakes
4 August, 20:01
![](/profiles/img/user-s.jpg)
check the rotation of main blades. in kit is made wrong side.
good luck!
24 August, 09:35
![](/profiles/img/142246-931-s.png)
thanks for the hint, Alexey. Will be tricky to fix this with the bent rotor blades. Have you seen any built where this was actually corrected?
25 August, 10:54
![](/profiles/img/68900-949-s.jpg)
chciałby nabyć ten przedmiot
![28mm Celestian Sacresant Aveline (Games Workshop 52-62) 52-62](/products/img/7/0/8/1572708-23814-59-t180.jpg)
Adepta Sororitas
Celestian Sacresant Aveline 1 Citadel Miniature Games Workshop 28mm
52-62 2024 Nowe formy 25 August, 10:53
![](/profiles/img/10148-258-s.jpg)
dodał nowy album.
29 9 August, 07:14
![](/profiles/img/10148-258-s.jpg)
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
9 August, 07:18
![](/profiles/img/user-s.jpg)
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
9 August, 11:50
![](/profiles/img/27826-126-s.jpg)
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
9 August, 17:52
![](/profiles/img/10148-258-s.jpg)
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
10 August, 17:25
![](/profiles/img/14213-529-s.jpg)
An unusual subject Roland! No doubt you will end up with a fantastic result
10 August, 17:34
![](/profiles/img/27826-126-s.jpg)
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
10 August, 18:22
![](/profiles/img/57594-145-s.jpg)
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
10 August, 19:02
![](/profiles/img/10148-258-s.jpg)
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
11 August, 09:28
![](/profiles/img/10148-258-s.jpg)
New pictures of the current state of construction: the 'Baby Clipper' still looks very dark, but in the next step it will get an 'Azur' blue underside, which will be completed by 'Middle Stone' and 'Dark Earth' on the upper sides. Since prototype photos already show this machine with heavy signs of use and weathering, I will endeavour to achieve a similar look here.
14 August, 09:26
![](/profiles/img/10148-258-s.jpg)
The 'Baby Clipper' has lost some of its elegance with all the rods and struts, but has gained in authenticity. A certain amount of effort is required to reconstruct the entire antenna equipment - not exactly a small amount - but also the structurally necessary struts: the kit manufacturer Azur does not provide any information here, let alone that it would put material for this in the box. The entire superstructure at the top of the engine nacelle is the result of own research. Everything was made from wire, cable insulation (exhaust pipes) and MG muzzles joined together (pitot tubes). The floats under the wings are braced with super-fine steel wire, which, by the way, is a very versatile material. The instructions also make no reference to the tailplane struts, which were also made by the builder.
However, most of the work has gone into the undercarriage! This was, to summarise, so heavily modified that it can actually be described as newly constructed from etched parts and wire from the leftover box.
So, I've already written a lot, but there's one more point: I'm particularly curious to see how my first self-built Vacu canopy performs on this project. I'm a bit anxious, but also very excited to see what the unmasking that will soon follow will show!
24 August, 06:52
![](/profiles/img/27826-126-s.jpg)
I agree with Marko.
A challenge with great resolution. Great job so far, Roland. And very nice painting job 👍
24 August, 18:01
![](/profiles/img/10148-258-s.jpg)
Thank you for these motivating words, quite appreciated!! On now to the final act of this project...
25 August, 10:23
![](/profiles/img/57594-145-s.jpg)
I agree with all comments above. I must say, I like way you attached the wires and struts - usually there is a bit of a lump of superglue where they attach to the fuselage, but you managed to make the connection points very neat.
25 August, 10:53
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo