Wiadomości
Roland Sachsenhoferdodał nowy album.
24 July, 04:57
Roland SachsenhoferYesterday the A.90 Orlyonok thundered in front, here are a couple of pictures of this event! 🙂 I added a few things to the kit, such as the prominent framework in front of the cockpit, which I built "on sight" with suitable wire. I haven't been able to find out what it's for - aerials, windscreen wipers/cleaning? - but I know that it contributes quite prominently to the appearance. I also added the various aerials on the fuselage and engine.
Thanks again for the hint about the 'ironed' water behind and under the engine, that was an important tip and came in time, thanks to Robert!
24 July, 05:06
Roland Sachsenhoferdodał nowy album.
35 7 July, 09:05
Roland SachsenhoferThis project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!
7 July, 09:08
TreehuggerI just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?
7 July, 18:13
Roland SachsenhoferIf this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.
7 July, 18:25
Roland SachsenhoferThank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!
8 July, 06:46
Raz1I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.
Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405
And the last surviving example (per Wikipedia) is here: museum-vmf.ru/
Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.
8 July, 14:30
Roland SachsenhoferI agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!
9 July, 12:40
Roland SachsenhoferA few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!
11 July, 15:21
Michael KohlProbably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3
11 July, 17:27
Roland SachsenhoferI think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.
A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂
12 July, 06:56
Roland SachsenhoferThe Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!
17 July, 17:34
Roland SachsenhoferA few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush
18 July, 11:51
Robert PodkońskiJust a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/
18 July, 14:43
Roland SachsenhoferRobert, thank you for that important hint, I wasn't aware of this!
18 July, 14:47
Roland SachsenhoferRobert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...
18 July, 18:18
Robert PodkońskiWater looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...
18 July, 19:47
Roland SachsenhoferBefore I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂
21 July, 18:12
Ben Mvery realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!
21 July, 20:04
gorbyI didn't know it had an undercarriage. The photos make it look like a very impressive beast.
22 July, 05:51
Robert PodkońskiFantastic job, Roland! (@gorby - it should be rather caller a beaching gear, imho, as it was used only to maneuvre on terra firma).
22 July, 06:54
Roland SachsenhoferMates, a great 'thank you' for your kind and motivating words! Very appreciated of course!
22 July, 19:12
Zbynek HonzikBeautiful, Roland! 👍
The pace at which you are able to build beautiful models is truly incredible!
22 July, 21:28
Roland SachsenhoferYesterday the A.90 Orlyonok thundered in front, here are a couple of pictures of this event! 🙂 I added a few things to the kit, such as the prominent framework in front of the cockpit, which I built "on sight" with suitable wire. I haven't been able to find out what it's for - aerials, windscreen wipers/cleaning? - but I know that it contributes quite prominently to the appearance. I also added the various aerials on the fuselage and engine.
Thanks again for the hint about the 'ironed' water behind and under the engine, that was an important tip and came in time, thanks to Robert!
24 July, 05:06
Sammy the ratposiada ten przedmiot
Sfl. 3,7cm Pak 35/36 auf Renault UE 630(f) 1+1 Quickbuild
S-Model (China) 1:72
PS720142 (PSSMO720142) 2014 Nowe części 24 July, 05:05
Sammy the ratposiada ten przedmiot
Munitionsschlepper auf Pz.Kpfw. I Ausf. A with Trailer 1+1 Quickbuild
S-Model (China) 1:72
PS720089 2015 Nowe części 24 July, 05:05
GBrandlAdded a new review for:
U.S. tank tools
Hauler 1:72
HLH72138 
Przejrzeć
IPMS Deutschland
24 July, 05:04
Geoffrey Youngposiada ten przedmiot
Tamiya's Fairey Swordfish Revised Edition Incorporating MkII Swordfish
How to build Nr. 1
Geoff Coughlin
24 July, 05:04
Sammy the ratposiada ten przedmiot
R35 Light Tank Late Version(modifié 39) 1+1 Quickbuild
S-Model (China) 1:72
PS720181 2016 Nowe części 24 July, 05:03
Sammy the ratposiada ten przedmiot
Daimler Dingo Mk.Ia Scout Car 2 quickbuild kits per box
S-Model (China) 1:72
PS720052 2013 Nowe formy 24 July, 05:02
Tim Jacobs@SCM Data suggestionsRecommend deleting this record:
I-16 Painting Mask (Clear Prop! CPA-4820, 1:48)
The correct product number is CPA-48020 per product image and 48020 is already in the database.
I-16 Painting Mask (Clear Prop! CPA-4820, 1:48)
The correct product number is CPA-48020 per product image and 48020 is already in the database.
23 July, 20:22
Geoffrey Youngposiada ten przedmiot
The English Electric Canberra Bomber & Training Versions B.1 to TT.18 & B57A
Aviation Icons Black Series Nr. 1
Paul Bradley
2023 24 July, 04:59
Christian Wdodał nowy album.
9 20 June 2020, 13:03
Christian WHoly moly! Finally I made it, to upload the pictures for the gallery! Thank you, Bro, for the better pictures 😉
14 May 2021, 21:51
Karl R.This is great! at first I thought it was a conversion kit off eBay or something. No you made this! Amazing! +1 Like
23 July, 13:41
Christian WThank you very much! Nowadays I'm sad, that I didn't make a mold out of all the parts. The only thind I have is the front grille, the bumper, tail lights and the mirrors. It was a hugh challenge to get all the things done. A lot of trial and error. When I think back, how much work it was to scale the grille down of a 1/24 metal kit. On the other hand, I've learned a lot in the whole process.
24 July, 04:56
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo