Wiadomości
Soeren R.
posiada ten przedmiot
posiada ten przedmiot
United States Army Air Forces
North American P-51 Mustang Cute/Q Version Tiger Model 1:Egg
109 2023 Nowe formy 10 October, 15:47
Skyhiker
dodał nowy album.
dodał nowy album.
18 zdjęć/zdjęcia
Foke Wulf 190 F-8 (1997 tooling)Nowy: 10 October, 15:45 1:72
Engine cowling painted.
Projekt: Focke-Wulf Fw 190 F-8
19 1 August, 17:22
Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.
2 August, 04:46
Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.
2 August, 11:32
Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼
2 August, 20:39
Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.
2 August, 20:52
Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.
2 August, 21:04
Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?
2 August, 21:09
Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.
2 August, 21:23
Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.
3 August, 02:12
Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!
3 August, 05:17
Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.
3 August, 05:31
Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!
3 August, 07:11
Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.
4 August, 10:03
Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.
4 August, 14:05
Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍
11 August, 15:13
Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.
11 August, 17:40
Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.
11 August, 17:42
Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.
11 August, 17:48
case
posiada ten przedmiot
posiada ten przedmiot
Trident Juncture 2018 Die größte NATO-Übung seit Ende des kalten Krieges
Fahrzeug Profile Nr. 96
Daniel Nowak, Ralph Zwilling
2019 10 October, 15:44
Michael Kohl
dodał nowy album.
dodał nowy album.
4 zdjęć/zdjęcia
Japanese Phantom F-4EJ KaiNowy: 10 October, 15:42 1:72
And s
Projekt: Japanese Phantom F-4EJ Kai
10 October, 15:41
Tazman07
posiada ten przedmiot
posiada ten przedmiot
Real Grade
MSM-07S Z´GOK Principality of Zeon Char Aznable's Use Mobile Suit Bandai Spirits 1:144
5061601 (16) 2021 Nowe pudełko (wznowienie) 10 October, 15:41
行 渡
dodał nowy album.
dodał nowy album.
16 24 April, 07:09
行 渡
There are still many parts to be installed and many details to be worked out, but cruising with friends is truly a joy. My Gneisenau is expected to be finalized this winter.
There are still many parts to be installed and many details to be worked out, but cruising with friends is truly a joy. My Gneisenau is expected to be finalized this winter.
6 August, 03:58
Robert Podkoński
Awesome! I suppose it was not an easy task to make her floatable (have you added any ballast inside the hull?)
Awesome! I suppose it was not an easy task to make her floatable (have you added any ballast inside the hull?)
10 October, 14:32
Dave
Really nice work. Your ship looks amazing, love the little details you added. Very well thought out plan.
Really nice work. Your ship looks amazing, love the little details you added. Very well thought out plan.
10 October, 14:39
行 渡
Thanks for your encouragement! Just like you suggested, I added loads of galvanized iron blocks to boost the ship's displacement, keep its center of gravity low, and make it more stable.
Thanks for your encouragement! Just like you suggested, I added loads of galvanized iron blocks to boost the ship's displacement, keep its center of gravity low, and make it more stable.
10 October, 14:42
case
posiada ten przedmiot
posiada ten przedmiot
Bedford QL 3-Ton WW2 Trucks In Detail - 2nd Extended Issue The British QL Truck Family In Belgian And British Museums A...
In Detail Nr. R084
František Kořán, Jan Moštěk
2019 10 October, 15:40
Tazman07
posiada ten przedmiot
posiada ten przedmiot
HGUC Gundam ZZ
RMS-192M "Zaku Mariner" Neo Zeon Amphibiuos Mobile Suit Bandai Spirits 1:144
5060667 (143) 2020 Nowe pudełko (wznowienie) 10 October, 15:40
case
posiada ten przedmiot
posiada ten przedmiot
Bofors 40mm WWII AA Gun Canadian WWII 40mm AA gun in Belgian army museums and privat...
Special Museum Line Nr. R 058
Jan Horak, Jan Kennis, Frantisek Koran, Marti...
2010 10 October, 15:40
case
posiada ten przedmiot
posiada ten przedmiot
Humber Mk. IV & GM Fox Mk. I in detail Paul Govaert's and Pierre Rieu's Humber Mk. IV and James Gos...
Special Museum Line Nr. R 063
James Gosling, František Ko, #345, án
10 October, 15:39
Tibor Szilvai
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
F-4J - Late (Serials 158355 up) interior 3D decal for Fine Molds
Quinta Studio 1:72
QD72080 2023 Nowe formy 10 October, 15:38
Jean-Louis Durand
Zacząłem tą rzecz
Zacząłem tą rzecz
WWII British
Humber Mk.I Scout Car & AFV Crew Set Bronco 1:35
CB35009SP 2016 Nowe części Więcej niż jeden temat (2)10 October, 15:38
case
posiada ten przedmiot
posiada ten przedmiot
Humber Mk.II Scout Car Humber Mk.II Scout Cars in Belgian Royal Army Museum and Pri...
Nr. R053
František Kořán, Willem De Boer, Martin Velek
2009 10 October, 15:37
Duster_d
dodał nowy album.
dodał nowy album.
9 zdjęć/zdjęcia
Nakajima Ki-43 Hayabusa (Hasegawa)Nowy: 10 October, 15:37 1:72
A matte varnish has been applied and almost everything is ready.
Projekt: Nakajima Ki-43 Hayabusa (Hasegawa)
12 27 September, 19:43
Mr D
Hi Duster 👋😃
Looking good, lve never built a Haseagawa....how have you found it..??
Good luck with next steps 👍👍
Hi Duster 👋😃
Looking good, lve never built a Haseagawa....how have you found it..??
Good luck with next steps 👍👍
27 September, 21:16
Duster_d
@Mr D,Hi, I like this build of this kit. The casting is thin and neat, although there are some minor flaws. The connection between the parts is good and the edges of the wings are sharp and thin. The decal has a thick layer of varnish. The plastic is typical of this company's kits (I have looked at other Hasegawa kits in my stash) some details is translucent in places, but durable.
@Guy, Thanks, I'll try hard 🙂
@Mr D,Hi, I like this build of this kit. The casting is thin and neat, although there are some minor flaws. The connection between the parts is good and the edges of the wings are sharp and thin. The decal has a thick layer of varnish. The plastic is typical of this company's kits (I have looked at other Hasegawa kits in my stash) some details is translucent in places, but durable.
@Guy, Thanks, I'll try hard 🙂
28 September, 05:26
Duster_d
I applied this primer three times and washed it off three times. "Orange peel" every time. And I diluted it and tried undiluted, degreased the model with alcohol - the result is the same. That's enough trying for today.
I applied this primer three times and washed it off three times. "Orange peel" every time. And I diluted it and tried undiluted, degreased the model with alcohol - the result is the same. That's enough trying for today.
28 September, 14:57
Duster_d
@Ben M, yes, I remember your MiG-15. I have never had problems with Vallejo primers before. They suddenly started back on my Super Etendard, but I thought it was an isolated incident. I have already sinned against isopropyl alcohol and the composition of water, I do not understand why these problems began.
@Ben M, yes, I remember your MiG-15. I have never had problems with Vallejo primers before. They suddenly started back on my Super Etendard, but I thought it was an isolated incident. I have already sinned against isopropyl alcohol and the composition of water, I do not understand why these problems began.
28 September, 15:47
Duster_d
I still didn't calm down. 🙂 Through experiments, it was possible to achieve a more or less normal application of the primer. The best results are achieved on a fat-free surface, without dilution, and at a minimum pressure of 0.8-1 bar.
[img1]
I still didn't calm down. 🙂 Through experiments, it was possible to achieve a more or less normal application of the primer. The best results are achieved on a fat-free surface, without dilution, and at a minimum pressure of 0.8-1 bar.
[img1]
28 September, 16:39
Duster_d
Do you guys think I should "strip" the paint even more? I liked working with Vallejo's chipping liquid 🙂
Do you guys think I should "strip" the paint even more? I liked working with Vallejo's chipping liquid 🙂
2 October, 06:10
Ben M
I've seen all kinds of chipping on WWII Japanese aircraft. I'd say you can't go wrong.
I've seen all kinds of chipping on WWII Japanese aircraft. I'd say you can't go wrong.
2 October, 12:02
Kesa Tiho
dodał nowy album.
dodał nowy album.
9 zdjęć/zdjęcia
Leopard at the berlin wallNowy: 10 October, 15:33 1:35
Got the tank sorta finished, need to add some accessories, a driver figure, weathering and decals
Projekt: West german tank at the Berlin wall
6 7 October, 12:20
Michael Kohl
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
Hi Kesa,
a Leo 1 at the Berlin Wall is a nice idea and I am curious about the connection your family has to this idea.
I don't wanna spoil the project and I may stand corrected, but to the best if my knowledge there were never any German tanks in Berlin between the end of the second world war and the german reunification. The tanks were American, russian, british and french.
7 October, 12:49
Kesa Tiho
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
The project and my family are completely unconnected just wanted to mention it.
I am aware that there werent any german tanks in berlin but i just found this leo for a cheap price and decided why not, i also dont think there were JGSDF iraq assistance teams in berlin at the time but the fun thing about this hobby is that i can do whatever i want so again decided it would add a nice touch to the dio
7 October, 13:21
TV_scalemodels
dodał nowy album.
dodał nowy album.
46 zdjęć/zdjęcia
Magic Factory A-4M SkyhawkNowy: 10 October, 15:32 1:48
Here is some detail shots of the plane. Nose can be hinged in two stages and access doors can be opened. There is also l...
Projekt: A-4M Skyhawk 1/48 (Magic Factory)
59 6 July, 18:37
John
Wow, this scooter turned out really well so far! I am impressed with the kit, decals and the job you have done. 👍
Wow, this scooter turned out really well so far! I am impressed with the kit, decals and the job you have done. 👍
14 September, 12:24
Sergej I
My, she is durty... quicksearch photo shows it a bit more clean, but it's free art of course 👍
flickr.com/photos/skyhawkpc/50796987381
My, she is durty... quicksearch photo shows it a bit more clean, but it's free art of course 👍
flickr.com/photos/skyhawkpc/50796987381
21 September, 13:33
TV_scalemodels
Sergej I: I didn't find too dirty pictures of this planes either. But I thought this is Marines bird so it can be very dirty 😁 Thanks for commenting!
Sergej I: I didn't find too dirty pictures of this planes either. But I thought this is Marines bird so it can be very dirty 😁 Thanks for commenting!
21 September, 17:14
Mr James
Truly stunning work.. The detail of this kit superb, highlighted by your skill set.
Truly stunning work.. The detail of this kit superb, highlighted by your skill set.
26 September, 15:33
CaptGPF
Agree with Me >james and company - an absolutely obscene build (in a good way)!
Agree with Me >james and company - an absolutely obscene build (in a good way)!
28 September, 05:45
DuperScale
That is one of the best planebuilds i have ever seen. Gratulation to this perfect build.
That is one of the best planebuilds i have ever seen. Gratulation to this perfect build.
28 September, 06:30
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo