Wiadomości
Racerx07
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
B-17G Flying Fortress Radio Operator's Station (for Airfix)
CMK (Czech Master Kits) 1:72
7381 2017 Nowe formy 30 July, 19:22
Racerx07
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Boeing B-17G Engine Set (Port Side Engine, 1pcs) for Airfix
CMK (Czech Master Kits) 1:72
7384 2018 Nowe formy 30 July, 19:21
Racerx07
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Boeing B-17G Engine Set (starboard side engine, 1pc) for Airfix
CMK (Czech Master Kits) 1:72
7385 2018 Nowe formy 30 July, 19:21
Dieter Bihlmaier
dodał nowy album.
dodał nowy album.
5 29 July, 17:52
Tom B.
Interesting little "Wha-If" Leo there 👍 The round communications-antenna (?) in the back of the turret looks really interesting!
Interesting little "Wha-If" Leo there 👍 The round communications-antenna (?) in the back of the turret looks really interesting!
30 July, 11:20
Heericane
posiada ten przedmiot
posiada ten przedmiot
Messerschmitt Bf109 G-6 & Kübelwagen Type 82 Set
Tamiya 1:48
25204 2022 Zestaw łączony Więcej niż jeden temat (2)30 July, 19:20
Matt H
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
Tiger I (2) Box Early + Late/Late Command/Michael Wittmann + 1/16 Michael Wittmann
Takom 1:35
2201W 2024 Zestaw łączony 30 July, 19:19
Matt H
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
US M4 Sherman T-54E1 Workable Track Link w/ Duckbill Track Extenders
Gecko Models 1:35
35GM0094 2024 Nowe formy 30 July, 19:19
Matt H
chciałby nabyć ten przedmiot
chciałby nabyć ten przedmiot
US M4 Sherman T-49 Workable Track Link w/ Duckbill Track Extenders
Gecko Models 1:35
35GM0095 2024 Nowe formy 30 July, 19:18
Michael Kohl
dodał nowy album.
dodał nowy album.
5 zdjęć/zdjęcia
Interflug Iljushin IL-62MNowy: 30 July, 07:23 1:144
At first glace fit of the major parts was good. Unfortunately I didn't manage to glue the window parts level with the fu...
Projekt: Interflug Iljushin IL-62
5 30 July, 07:20
Zbynek Honzik
Taking a seat and I keep my fingers crossed that the building will be joyful and successful, Michael!
Taking a seat and I keep my fingers crossed that the building will be joyful and successful, Michael!
30 July, 09:33
Łukasz Gliński
Can't miss an IF project 👍
That windshield is terrible - what's your plan for it?
And most importantly - are you going to build Lady Agnes? 🙂
Can't miss an IF project 👍
That windshield is terrible - what's your plan for it?
And most importantly - are you going to build Lady Agnes? 🙂
30 July, 14:27
Michael Kohl
Hi mates. Nice to have your interest and you on board. Thanks Zbynek. So far it took much more effort than I expected. Lets see how it continues.
@Mr D: childhood memories. I suppose you build it in scale 1:100? VEB Plasticard?
Lukasz, I bent and glued it und sanded it flush afterwards. As I will use the Authentic Airliner decals for the cockpit windows, they do not need to be transparent.
Hi mates. Nice to have your interest and you on board. Thanks Zbynek. So far it took much more effort than I expected. Lets see how it continues.
@Mr D: childhood memories. I suppose you build it in scale 1:100? VEB Plasticard?
Lukasz, I bent and glued it und sanded it flush afterwards. As I will use the Authentic Airliner decals for the cockpit windows, they do not need to be transparent.
30 July, 19:16
Heericane
posiada ten przedmiot
posiada ten przedmiot
Focke-Wulf Fw190 D-9 JV44 & Citroen 11CV Staff Car Set
Tamiya 1:48
25213 2023 Zestaw łączony Więcej niż jeden temat (2)30 July, 19:15
Heericane
posiada ten przedmiot
posiada ten przedmiot
Tiger I (2) Box Early + Late/Late Command/Michael Wittmann + 1/16 Michael Wittmann
Takom 1:35
2201W 2024 Zestaw łączony 30 July, 19:13
J35J
dodał nowy album.
dodał nowy album.
9 zdjęć/zdjęcia
Supermarine 224 - The First Spitfire1:72
Sectioning done, now some fitting work to get the wing sorted
Projekt: Supermarine 224 - The First Spitfire
10 21 July, 09:11
J35J
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
Thanks Gorby! This is my second vacu kit build and this time it feels a little bit more straight forward…
My experience so far with vacu kits is that you have to spend a good amount of time on fitting, sanding and putty work to get a nice base for paint and finishing. Also spending quite some time reviewing old photos to get a good picture of the details. This as there is a fair amount of scratch work to get a decent build.
25 July, 11:25
Robert Podkoński
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
You're a brave man, indeed! I will follow this thread with pleasure, for sure.
25 July, 12:55
Mr D
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
Nice, Nice 👍👍, lalways wanted to see a vacform build, Do you have to make up other parts to add on ??
Thanks for upload 😃👍
27 July, 19:59
J35J
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
Thanks Mr D for your comments.
There will certainly be scratch build involved, mainly regarding the details as it looks for now. Otherwise I will raid my spare part stash first in order to save time and frustration.
If you are intrested in vac kits you can also have a look at my first vac kit:
McDonnell XP-67 Moonbat | Album by J35J (1:72)
27 July, 21:39
Mr D
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
Thanks 👍👍 great, will do , l have an intest...as l enjoy making parts, lve had to do it few times, when parts lost or broken or details missed of kit...even canopy once 🤣.
Will check out the XP-67
28 July, 17:00
J35J
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
@Mr D - yes you will need some good scissors as a start😅, for the fine tuning of the parts I normally use saw razor blades and sanding paper of variuos grits. Regarding glue I use "normal" Tamyia Extra Thin, the vacu kit plastic is often quite soft and melts easily.
30 July, 19:02
J35J
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
@Skyhiker - Happy to hear that your following with great intrest. Usually the building pace goes down during the sommer period as I have been reminded that we have a garden that also need some TLC…😂
Nevertheless, yes there is planning and ordning of parts going on behind the scenes. Cockpit need to be done, rescribing the full kit, alignment of wheels as the mold was totally off-set. Drill out all machine guns for after market parts etc.
The main work will be to prepare the plane for NMF look also including some aluminum dope areas. Will try AK's metal paints this time. Stay tuned!
30 July, 19:11
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo